د بهرینګر TD-3 انلاګ باس لاین ترکیب کارونکي لارښود

1. پیژندنه

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Behringer TD-3 Analog Bass Line Synthesizer. Please read this manual thoroughly to ensure proper use and to maximize the performance of your instrument.

The Behringer TD-3 is an analog bass line synthesizer designed to produce classic electronic music sounds. It features an all-analog signal path, a 16-step sequencer, and a resonant low-pass filter.

2. ترتیب کول

2.1 پیک کول

Carefully remove the TD-3 from its packaging. Retain the packaging materials for future transport or storage.

2.2 د بریښنا نښلول

Connect the included DC power adapter to the 'DC IN' port on the rear panel of the TD-3. Plug the adapter into a suitable power outlet. Ensure the power switch is in the 'OFF' position before connecting power.

2.3 آډیو ارتباطات

• اصلي محصول: Connect the 'OUTPUT' jack (1/4" TS) on the rear panel to your mixer, audio interface, or ampلايف
• هیډفونونه: Connect headphones to the 'PHONES' jack (1/4" TRS) on the front panel for private monitoring. Adjust the 'VOLUME' knob to a comfortable listening level.

2.4 MIDI/USB Connections

• MIDI دننه او بهر: Use standard 5-pin DIN MIDI cables to connect the 'MIDI IN' and 'MIDI OUT' ports to other MIDI devices for synchronization or control.
• USB: Connect the USB port to a computer for MIDI control and firmware updates.

۲.۵ سي وي/دروازې اتصالونه

The TD-3 features 'CV OUT' and 'GATE OUT' jacks (3.5mm TS) for integration with modular synthesizers and other analog control voltage equipment. These outputs transmit pitch and gate information from the sequencer.

انځور 1: Front panel and rear connections of the Behringer TD-3. This image displays the various knobs, buttons, and input/output jacks, including the power input, audio output, headphone jack, MIDI ports, USB port, and CV/Gate connections, all essential for setting up the device.

3. Operating the TD-3

3.1 فعالول

After all connections are made, switch the 'POWER' button on the rear panel to the 'ON' position. The unit will power up.

3.2 د کنټرول اوورview

The TD-3's front panel is divided into several sections:

• VCO (Voltage Controlled Oscillator): Controls the basic sound waveform and pitch.
• VCF (Voltage Controlled Filter): Shapes the timbre of the sound.
• لفافه: Controls the decay of the filter.
• ترتیب کوونکی: Programs and plays musical patterns.
• تحریف: Adds overdrive to the sound.
• حجم: د ټول محصول کچه کچه تنظیموي.

3.3 VCO Section

• ټون: د اوسیلیټر ټولیز پیچ تنظیموي.
• څپې: Selects between Sawtooth (bright, rich harmonics) and Square (hollow, reedy) waveforms.

3.4 VCF Section

• پرې کول: Sets the frequency at which the filter begins to attenuate higher frequencies.
• غبرګون: Emphasizes frequencies around the cutoff point, creating a 'wah' effect at higher settings.
• لفافه: Controls the amount of filter envelope modulation applied to the cutoff frequency.
• مړینه: Determines the length of the filter envelope's decay phase.
• تلفظ: Controls the intensity of the accent effect on notes.

۳.۳ د سیکوینسر عملیات

The TD-3 features a powerful 16-step sequencer for creating bass lines.

• د موډ سویچ: Selects between 'WRITE' (for programming patterns) and 'PLAY' (for playing patterns or tracks).
• TRACK/PATTERN Selector: In 'PLAY' mode, choose between playing a single 'PATTERN' or a 'TRACK' (a chain of patterns). In 'WRITE' mode, select 'TRACK' to edit a track or 'PATTERN' to edit a pattern.
• د نمونې ګروپ: Selects one of four groups (I, II, III, IV), each containing 8 patterns (1-8).
• ټیمپو: د سیکوینسر د پلې بیک سرعت تنظیموي.
• پیل / ودریږئ: Initiates or halts sequencer playback.
• ولیکئ/راتلونکی: Used to confirm steps during pattern writing or to advance to the next step.
• PITCH MODE: Selects the input source for pitch information (INT for internal keyboard, MIDI, USB, TRIG for external trigger).
• د وخت موډ: Sets the clock resolution for external synchronization (1PPS, 2PPQ, 24PPQ, 48PPQ).
• د فعالیت تڼۍ: These buttons (DEL, INS, CH, COPY, PASTE, TRANSPOSE, ACCENT, SLIDE) perform various editing functions within the sequencer.
• STEP Buttons (1-8, 9, 0, 100, 200): Used for entering notes, selecting steps, and other functions depending on the mode.

3.6 Distortion Section

• آن/آف سویچ: Engages or bypasses the built-in distortion effect.
• ویش: د ډیر چلولو اندازه تنظیموي.
• ټون: Shapes the frequency content of the distorted sound.
• کچه: Controls the output level of the distortion effect.

3.7 د حجم کنټرول

The 'VOLUME' knob adjusts the overall output level of the TD-3. Use this to balance the TD-3's output with other instruments in your setup.

4. ساتنه

4.1 پاکول

Clean the TD-3 with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish and internal components.

4.2 ذخیره کول

When not in use, store the TD-3 in a cool, dry place away from direct sunlight and extreme temperatures. If transporting, use the original packaging or a suitable protective case.

4.3 د فرم ویئر تازه معلومات

په دوره یي ډول د بیرینګیر معاینه وکړئ website for available firmware updates. Updates can provide new features, improvements, and bug fixes. Follow the instructions provided with the firmware update carefully.

5. ستونزه حل کول

۶.۱ د غږ محصول نشته

• Ensure the power adapter is correctly connected and the unit is powered on.
• د سم اتصال او بشپړتیا لپاره ټول آډیو کیبلونه وګورئ.
• Verify the 'VOLUME' knob is turned up.
• If using headphones, ensure they are fully plugged in and the volume is adjusted.
• Confirm that a pattern is playing and the 'MODE' switch is set to 'PLAY'.

۵.۲ سیکوینسر نه غږیږي

• Press the 'START/STOP' button to initiate playback.
• Ensure the 'MODE' switch is set to 'PLAY'.
• Check the 'TEMPO' knob setting; it might be set to a very slow speed.
• If synchronized externally, verify the external clock source is active and the 'TIME MODE' is correctly set.

5.3 MIDI Control Issues

• Ensure MIDI cables are connected correctly (MIDI OUT of controller to MIDI IN of TD-3).
• Verify that the TD-3 and your MIDI controller are on the same MIDI channel.
• Check the 'PITCH MODE' setting on the TD-3 to ensure it is set to 'MIDI' or 'USB' as appropriate.

6. مشخصات

7. تضمین او ملاتړ

Behringer products are designed and manufactured to high standards. For detailed warranty information and technical support, please refer to the official Behringer webسایټ یا خپل محلي توزیع کونکي سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.

د نورو مرستو لپاره، لیدنه وکړئ په ایمیزون کې د بهرینګر پلورنځی یا د بهرینګر رسمي ملاتړ پاڼه.