د WEN 10 انچه واحد بیول سلایډینګ کمپاونډ میټر سا (MM1011T) لارښود لارښود

۱.۱. د خوندیتوب مهم معلومات

د اور لګېدو، برقي شاک او شخصي ټپي کېدو خطر کمولو لپاره د برېښنايي وسایلو کارولو پر مهال تل د خوندیتوب اساسي احتیاطي تدابیر په پام کې ونیسئ. د دې محصول له چلولو دمخه ټولې لارښوونې ولولئ.

• مناسب شخصي محافظتي تجهیزات واغوندئ، پشمول د سترګو محافظت، د اوریدلو محافظت، او د دوړو ماسک.
• ډاډ ترلاسه کړئ چې ورک پیس په خوندي ډول cl دیampد پرې کولو دمخه ایډ.
• لاسونه او ګوتې د تیغ له لارې لرې وساتئ.
• Disconnect power before making adjustments or changing accessories.
• د کار ځای پاک او ښه څراغ وساتئ.

2. د بسته محتويات

د خلاصولو پر مهال ډاډ ترلاسه کړئ چې ټول توکي شتون لري:

• WEN 10-Inch Single Bevel Sliding Compound Miter Saw (MM1011T)
• 10-inch 40-tooth carbide-tipped blade (pre-installed or to be installed)
• Two table extensions
• یو clamp مجلس
• د دوړو کڅوړه
• د دوړو بندر اډاپټر
• Class II laser guide (integrated)

۴. اسمبلۍ او ابتدايي تنظیم

The miter saw requires minimal assembly. Follow these steps:

1. Attach the Throat Plate: Secure the front part of the throat plate to the saw base using the provided hardware.
2. دستګاه نصب کړئ: Attach the main handle to the saw head with the designated screws.
3. Insert Side Tables: Slide the two table extensions into their respective slots on either side of the saw base to provide additional workpiece support.
4. Check Squareness: Before first use, verify that the blade is square to the fence and the saw bed at 90 degrees. Adjust if necessary according to the detailed instructions in the full manual.

4. عملیاتي لارښوونې

Familiarize yourself with the saw's controls and functions before making cuts.

4.1 Miter Angle Adjustment

The saw can miter up to 45 degrees in either direction. To adjust:

1. د آری بیس په مخ کې موقعیت لرونکی د مایټر لاک نوب خلاص کړئ.
2. Press the miter detent lever and rotate the turntable to the desired angle. The saw features 9 positive miter stops: two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees, and one at 0 degrees.
3. For angles between detents, release the lever and tighten the miter lock knob to secure the position.

۴.۳ د بیول زاویه تنظیم کول

The saw bevels up to 45 degrees to the left. To adjust the bevel angle:

1. Loosen the bevel lock handle at the rear of the saw.
2. د آری سر مطلوب زاویه ته وخورئ.
3. Tighten the bevel lock handle to secure the position.

4.3 Sliding Function

The dual-rail slide system allows for cutting wider materials. Pull the saw head forward, make the cut, and push it back. This design also enables compact operation, allowing the saw to be placed flush against a wall.

4.4 Laser Guide

The integrated Class II laser guide illuminates the line of cut for enhanced accuracy. Activate the laser using the switch located on the saw head.

4.5 ژوره بند

Utilize the depth stop feature for making partial cuts, such as dadoes or grooves. Adjust the depth stop knob to limit the downward travel of the blade.

4.6 Workpiece Clamping

Always secure your workpiece using the included clamp assembly to prevent movement during cutting, ensuring safety and accuracy.

4.7 د دوړو راټولول

Attach the included dust bag or a dust collection device to the dust port adapter to manage sawdust and maintain a cleaner work environment.

5. ساتنه

Regular maintenance ensures optimal performance and extends the life of your miter saw.

• پاکول: Regularly clean sawdust and debris from the saw, especially around the blade guard, miter scale, and sliding rails. Use compressed air for hard-to-reach areas.
• د تیغ معاینه: Inspect the blade for sharpness and damage before each use. Replace dull or damaged blades promptly.
• غوړول: Periodically apply a light coat of lubricant to the sliding rails to ensure smooth operation.

6. ستونزه حل کول

Address common issues with your miter saw:

• ناسمې ټوټې کول: Verify the saw's calibration for miter and bevel angles. Ensure the blade is clean and sharp. Check for any play in the sliding mechanism.
• ډېره دوړې: Ensure the dust bag is properly attached and emptied regularly. Check for any blockages in the dust port or collection system.
• Motor Not Starting/Overheating: Check the power supply and ensure the circuit is not overloaded. Allow the motor to cool down if it overheats. Consult the full manual for specific electrical requirements.

7. تخنیکي مشخصات

۷. تضمین او د پیرودونکو ملاتړ

The WEN 10-Inch Single Bevel Sliding Compound Miter Saw (MM1011T) comes backed by a two-year warranty. WEN maintains a stocked inventory of replacement parts and offers a customer help line for support.

For warranty claims, replacement parts, or technical assistance, please refer to the contact information provided in your product packaging or visit the official WEN webسایټ