د PUSOKEI مخکینۍ پینل USB 3.0 هب 8 پورټ لارښوونې لارښود

1. محصول ختم شوview

The PUSOKEI Front Panel USB 3.0 Hub provides eight additional USB 3.0 ports for your desktop computer. Designed to fit into a standard 5.25-inch optical drive bay, this hub connects to your motherboard's 19-pin USB 3.0 header and receives supplementary power via a SATA power connector, ensuring stable performance for multiple high-speed USB devices.

انځور 1.1: مخکی view of the PUSOKEI 8-Port USB 3.0 Front Panel Hub with connected cables.

2. د بسته محتويات

• 1 x PUSOKEI Front Panel USB 3.0 Hub (8-Port)
• Integrated 19-pin USB 3.0 header cable
• Integrated SATA power cable
• Mounting screws (may vary by package)

۱. د هارډویر اړتیاوې

Before installation, ensure your computer system meets the following requirements:

• An available 5.25-inch optical drive bay in your PC case.
• A motherboard with at least one available 19-pin USB 3.0 header (sometimes referred to as a 20-pin header, with one pin blocked).
• An available SATA power connector from your power supply unit (PSU).

Image 3.1: Close-up of the 19-pin USB 3.0 header cable and SATA power cable connectors.

4. د نصبولو لارښوونې

Follow these steps to install the USB 3.0 Front Panel Hub:

1. خپل سیسټم چمتو کړئ: Power off your computer and unplug it from the wall outlet. Open your computer case to access the internal components.
2. Locate an Available Bay: Identify an empty 5.25-inch optical drive bay. Remove any front panel covers or brackets that may be obstructing the bay.
3. Insert the Hub: Carefully slide the PUSOKEI USB 3.0 Hub into the chosen 5.25-inch bay from the front of the case until its mounting holes align with the case's screw holes.
4. مرکز خوندي کړئ: Use the provided mounting screws (or screws from your PC case) to secure the hub firmly into the drive bay.
5. Connect the 19-pin USB 3.0 Header: Locate an available 19-pin USB 3.0 header on your motherboard. Connect the hub's 19-pin cable to this header. Ensure the connector is oriented correctly to avoid damage.
6. د SATA بریښنا سره وصل کړئ: Connect the hub's SATA power cable to an available SATA power connector from your power supply unit. This connection is crucial for providing sufficient power to all eight USB 3.0 ports.
7. قضیه بنده کړئ: Once all connections are secure, close your computer case and reconnect the power cable.

Image 4.1: Illustration of connecting the 19-pin USB 3.0 header cable to the motherboard.

5. عملیات

After successful installation, power on your computer. The operating system should automatically detect and install the necessary drivers for the USB 3.0 hub. You can then connect your USB devices to any of the eight front-facing USB 3.0 ports.

• USB 3.0 Speed: The hub supports USB 3.0 data transfer speeds, which are significantly faster than USB 2.0. Ensure your connected devices and cables are also USB 3.0 compatible to achieve optimal performance.
• د بریښنا رسول: The SATA power connection ensures that the hub can provide adequate power to all connected devices, including those with higher power requirements.

انځور ۳.۱: نږدې انځور view of the eight USB 3.0 ports on the front panel.

6. ساتنه

To ensure the longevity and optimal performance of your USB hub:

• Keep the front panel ports free from dust and debris. Use a soft, dry cloth or compressed air for cleaning.
• د مرکز د سختې تودوخې یا رطوبت سره د مخ کیدو څخه ډډه وکړئ.
• Do not attempt to disassemble the unit, as this will void any potential warranty and may cause damage.

7. ستونزه حل کول

If you encounter issues with your PUSOKEI USB 3.0 Hub, consider the following troubleshooting steps:

• Ports Not Functioning:
  • Verify that the 19-pin USB 3.0 header cable is securely connected to both the hub and the motherboard.
  • Ensure the SATA power cable is firmly connected to both the hub and an active SATA power connector from your PSU.
  • Check your motherboard's BIOS/UEFI settings to ensure USB 3.0 is enabled.
  • Try connecting a different USB device to confirm if the issue is with the hub or the device.
• د لیږد ورو سرعت:
  • Confirm that both the connected device and the USB cable are USB 3.0 compatible. USB 2.0 devices will operate at USB 2.0 speeds.
  • Ensure the hub is receiving adequate power via the SATA power connection.
• Hub Not Detected:
  • Re-seat the 19-pin USB 3.0 header cable on the motherboard.
  • Check Device Manager in Windows (or equivalent in other OS) for any unrecognized USB devices or driver issues.
  • Ensure your motherboard's USB 3.0 drivers are up to date.

8. مشخصات

9. تضمین او ملاتړ

Information regarding product warranty and customer support is not provided in the available product data. Please refer to the retailer or manufacturer's webد تضمین پوښښ او ملاتړ اختیارونو په اړه د جزیاتو لپاره سایټ.