1. پیژندنه
This manual provides instructions for the installation, operation, and maintenance of your Sena Parani M10 Bluetooth Motorcycle Headset. The Parani M10 allows for seamless communication and entertainment while riding, featuring Bluetooth intercom capabilities and smartphone connectivity for music, GPS, and calls. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. د بسته محتويات
The Parani M10 package typically includes the following components:
- Parani M10 Main Unit
- وائرډ بوم مایکروفون
- Speakers (pair)
- هیلمټ Clamp کټ
- د USB چارج کیبل
- د سپیکر پیډونه
- د سپیکرو لپاره هک او لوپ فاسټینرونه
- د کارونکي لارښود (دا لاسوند)
Figure 2.1: Parani M10 complete kit showing the main unit, wired microphone, and speakers.
3. محصول ختم شوview
Familiarize yourself with the main unit's components and controls.
Figure 3.1: Parani M10 Main Unit Controls and Ports.
- جوګ ډایل: Used for volume control, menu navigation, and various functions.
- ملټي فنکشن بټن: Primary button for power, pairing, and call management.
- د LCD نندارې: Shows battery status, volume level, intercom pairing status, and other operational information.
- DC Power Charging & Firmware Upgrade Port: For charging the device and updating its firmware.
- Speakers and Microphone Port: Connection point for the wired speakers and microphone.
4. ترتیب او نصب کول
The Parani M10 is designed for easy installation on most motorcycle helmets.
4.1 Attaching the Main Unit to the Helmet
- د خپل هیلمټ په چپ اړخ کې د موټر چلولو لپاره مناسب ځای غوره کړئamp کټ
- د هیلمټ پیچونه خلاص کړئ.amp kit and slide it between the helmet shell and the inner padding. Ensure it is securely fastened.
- Slide the Parani M10 main unit onto the clamp تر هغه چې دا په ځای کې کلیک وکړي.
Figure 4.1: Parani M10 unit installed on a helmet.
۳.۳ د سپیکرو او مایکروفون نصب کول
- Attach the hook and loop fasteners to the inside of your helmet, aligning them with your ears.
- Press the speakers onto the fasteners. Ensure the speakers are positioned directly over your ears for optimal audio quality.
- Attach the wired boom microphone to the inside of the helmet, positioning it close to your mouth but not directly in front of it to avoid wind noise.
- Route the speaker and microphone wires neatly under the helmet padding to the main unit's port.
- Connect the speaker/microphone cable to the corresponding port on the Parani M10 main unit.
4.3 د وسیلې چارج کول
Before first use, fully charge the Parani M10. Connect the USB charging cable to the DC Power Charging Port on the main unit and to a USB power source. The LCD display will indicate charging status.
5. عملیاتي لارښوونې
۸ پاور آن/بند
- پاور آن: د ملټي فنکشن بټن د 1 ثانیو لپاره فشار ورکړئ او ونیسئ.
- بندول: د 5 ثانیو لپاره د ملټي فنکشن ت Pressۍ فشار او ونیسئ.
5.2 د حجم کنټرول
Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume. The LCD display will show the current volume level.
Figure 5.1: LCD display showing pairing status and volume.
۳.۳ د سمارټ فون جوړه کول
- With the M10 powered off, press and hold the Multi-function Button for 5 seconds until the LED flashes red and blue, indicating pairing mode.
- په خپل سمارټ فون کې، د بلوتوث ترتیباتو ته لاړ شئ او د نویو وسایلو لټون وکړئ.
- Select "Parani M10" from the list of available devices.
- Once paired, the LED will flash blue, and the LCD will confirm connection.
- You can now listen to music, GPS navigation, and make/receive phone calls through your headset.
5.4 بلوتوټ انټرکام
The Parani M10 supports intercom communication with up to four other Parani users on its dedicated Bluetooth intercom network.
- Pairing Intercom:
- Ensure both M10 units are powered on.
- On one M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- On the second M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- The units will automatically search and pair. Once paired, the LED will flash blue.
- Repeat this process for additional units (up to four total).
- Starting/Ending Intercom Conversation:
- To start an intercom conversation, tap the Jog Dial.
- To end an intercom conversation, tap the Jog Dial again.
۵.۳ د تلیفون زنګونه
- زنګ ووهئ: د ملټي فنکشن تڼۍ ټایپ کړئ.
- ټلیفون پای: د ملټي فنکشن تڼۍ ټایپ کړئ.
- زنګ رد کړئ: د 2 ثانیو لپاره د ملټي فنکشن ت Pressۍ فشار او ونیسئ.
- غږیز ډایل: In standby mode, press and hold the Multi-function Button for 3 seconds. (Requires smartphone support for voice commands).
6. ساتنه
6.1 پاکول
اصلي واحد د نرم سره مسح کړئ، دamp cloth. Do not use harsh chemicals or solvents. Ensure all ports are dry before charging or use.
6.2 د بیټرۍ پاملرنه
- وسیله په منظم ډول چارج کړئ، حتی که په کارولو کې نه وي، د بیټرۍ روغتیا ساتلو لپاره.
- Avoid storing the device in extreme temperatures.
- Do not attempt to replace the internal battery yourself. Contact Sena support for battery service.
6.3 د فرم ویئر تازه معلومات
په دوره یي ډول سینا وګورئ website for firmware updates. Updating the firmware can improve performance and add new features. Connect the device to your computer using the USB cable and follow the instructions provided by Sena's Device Manager software.
7. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| وسیله فعاله نه ده. | ټیټ بیټرۍ. | وسیله په بشپړ ډول چارج کړئ. |
| د سمارټ فون سره جوړه نشي کیدی. | Device not in pairing mode; smartphone Bluetooth off; interference. | Ensure M10 is in pairing mode (red/blue flashing LED). Turn smartphone Bluetooth off and on. Move away from other Bluetooth devices. |
| انټرکام نه وصل کېږي. | Units not in intercom pairing mode; out of range; already connected to other devices. | Ensure both M10 units are in intercom pairing mode. Reduce distance between units. Disconnect from other Bluetooth devices before intercom pairing. |
| له سپیکرو څخه غږ نشته. | Volume too low; speakers not connected properly; faulty speakers. | Increase volume using the Jog Dial. Check speaker connections. Test with another audio source if possible. |
| مایکروفون کار نه کوي. | Microphone not connected properly; faulty microphone. | Check microphone connection to the main unit. Ensure microphone is positioned correctly. |
7.1 د فابریکې ری سیٹ
If issues persist, a factory reset may resolve them. To perform a factory reset, press and hold the Multi-function Button and the Jog Dial simultaneously for 10 seconds. The device will reset to its default settings.
8. مشخصات
| د ماډل نوم | پرواني M10 |
| بلوتوث نسخه | بلوتوث 5.1 |
| د انټرکام رینج | Up to 1 km (0.6 miles) in open terrain |
| Max Intercom Users | 4 (Parani-only network) |
| د خبرو وخت | تر 16 ساعتونو پورې |
| د چارج کولو وخت | تقریبا 2.5 ساعته |
| د عملیاتي حرارت درجه | -10°C ته 55°C (14°F ته 131°F) |
| وزن | نږدې 60g (2.1 oz) |
Note: Specifications are subject to change without notice. Actual performance may vary based on environmental conditions and usage.
9. تضمین او ملاتړ
9.1 د تضمین معلومات
Sena products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official Sena webسایټ یا د تضمین کارت چې ستاسو محصول سره شامل دی. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
9.2 د پیرودونکي ملاتړ
د تخنیکي مرستې، ستونزو حل کولو، یا عمومي پوښتنو لپاره، مهرباني وکړئ رسمي سینا ته مراجعه وکړئ website for support resources, FAQs, and contact information. You can also reach out to your local dealer for assistance.
- سینا Webسایټ: www.sena.com
- پرواني Webسایټ: www.parani.com
