د COMICA BoomX-U Qua UHF بې سیم لاوالیر مایکروفون سیسټم کارونکي لارښود

1. پیژندنه

The COMICA BoomX-U Qua is a professional UHF wireless lavalier microphone system designed for high-quality audio recording. This system features four transmitters and one receiver, making it suitable for multi-person interviews, filming, live streaming, and other professional audio applications. It offers stable signal transmission, versatile compatibility, and convenient monitoring capabilities.

2. د بسته محتويات

ډاډ ترلاسه کړئ چې لاندې ټول توکي ستاسو په بسته کې شامل دي:

• 1 x رسیدونکی
• 4 x لیږدونکي
• 4 x Lav Mic
• ۱ x د باد مف
• 1 x 3-in-1 USB-C Charging Cable
• 1 x 3.5mm TRS-Dual XLR Cable
• 1 x 3.5mm TRS Cable
• 1 x د قضیې قضیه

Image 2.1: All components of the COMICA BoomX-U Qua system.

انځور ۲: تفصیلي view of the included accessories and main units.

3. محصول ختم شوview

The BoomX-U Qua system consists of a receiver and four transmitters, each equipped with a built-in microphone and an input for an external lavalier microphone.

3.1 لیږدونکی (TX)

• جوړ شوی مایکروفون: For direct audio capture.
• External Lavalier Microphone Input: Connect the included lavalier microphone for discreet placement.
• د بریښنا / جوړه کولو تڼۍ: Controls power and initiates pairing.
• د وضعیت شاخص: Displays power, pairing, and battery status.

3.2 اخیستونکی (RX)

• د ښودلو سکرین: Shows channel status, audio levels, battery, and mixing mode.
• د کنټرول تڼۍ: For menu navigation, channel selection, and volume adjustment.
• 180° Foldable Antenna: Enhances signal stability and range.
• د آډیو تولید بندرونه: 3.5mm TRS/TRRS and XLR outputs for various devices.
• Headphone Monitoring Port: د ریښتیني وخت آډیو څارنې لپاره.

Image 3.1: Demonstrates the use of the external lavalier microphone versus the transmitter's built-in microphone.

4. د تنظیم کولو لارښود

4.1 بریښنا کول / بندول

1. To power on, press and hold the power button on both the transmitter(s) and receiver until the display or indicator light activates.
2. د بریښنا بندولو لپاره، د بریښنا تڼۍ فشار کړئ او وساتئ تر هغه چې وسیله بنده شي.

۴.۳ د ثبتولو وسیلو سره نښلول

The BoomX-U Qua offers wide compatibility with various recording devices:

• DSLR Cameras/Camcorders: Use the 3.5mm TRS cable for connection.
• سمارټ فونونه: Use the 3.5mm TRRS cable. (Note: For iPhones without a 3.5mm jack, an official Lightning to 3.5mm adapter is required. For some Android phones, a USB-C to 3.5mm adapter may be needed.)
• Audio Mixers/Professional Equipment: Use the 3.5mm TRS-Dual XLR cable for balanced audio input.

Image 4.1: Illustrates various connection types and compatible devices including cameras, camcorders, recorders, and smartphones.

4.3 Pairing Transmitters and Receiver

The system supports both auto-scanning and manual channel setting for pairing.

• Auto-scanning: This feature automatically finds and assigns the best available channel, ideal for quick setup in most scenarios. Refer to the receiver's menu for auto-scan options.
• Manual Channel-setting: Allows you to manually select specific channels for each transmitter. This is useful in environments with potential interference or when precise channel management is required.

Image 4.2: Shows the auto-scanning and manual channel setting interface on the receiver.

5. عملیاتي لارښوونې

5.1 Audio Mixing Modes

The receiver offers flexible audio output options:

• Mixed Output (MIX ALL): All four audio tracks from the transmitters are combined into a single output track. This is suitable for scenarios where a single, combined audio feed is desired.
• Individual Output (MIX None): Each of the four audio tracks is output independently. This allows for greater control during post-production, enabling individual adjustment of each microphone's audio.

Image 5.1: Receiver display showing the 'MIX ALL' mode, combining all four channels.

Image 5.2: Receiver display showing 'MIX None' mode, providing independent audio tracks.

5.2 Real-Time Audio Monitoring

Connect headphones to the receiver's 3.5mm monitoring port to listen to the audio in real-time during recording. This allows for immediate detection and adjustment of any audio issues.

Image 5.3: Diagram illustrating real-time monitoring connection to the receiver.

۵. چارج کول او د بیټرۍ ژوند

The BoomX-U Qua system is powered by rechargeable Lithium Polymer batteries. The transmitters have a 700mAh battery, and the receiver has a 1400mAh battery, providing up to 6.5 hours of working time.

• چارج کول: Use the included 3-in-1 USB-C charging cable to charge all units simultaneously. Connect the USB-C end to the charging ports on the transmitters and receiver, and the USB-A end to a compatible USB power adapter (not included).
• د کارولو پرمهال چارج کول: The system supports charging while operating, ensuring uninterrupted recording sessions.

Image 6.1: Illustrates the charging process for the transmitters and receiver using the 3-in-1 USB-C cable.

7. ساتنه

• Keep the devices dry. Do not expose them to rain or moisture.
• په یخ او وچ ځای کې د مستقیم لمر وړانګو او خورا تودوخې څخه لرې وساتئ.
• واحدونه د نرم او وچ ټوکر سره پاک کړئ. د سختو کیمیاوي موادو یا د کثافاتو پاکوونکو کارولو څخه ډډه وکړئ.
• Ensure the antennas are not bent or damaged during transport or storage.
• په منظم ډول کیبلونه د خرابیدو او اوښکو لپاره وګورئ.

8. ستونزه حل کول

If you encounter issues with your BoomX-U Qua system, refer to the following common problems and solutions:

9. مشخصات

Key technical specifications for the COMICA BoomX-U Qua system:

10. تضمین او ملاتړ

COMICA products typically come with a standard manufacturer's warranty. For specific warranty details, registration, or technical support, please refer to the warranty card included in your package or visit the official COMICA webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.