د بهرینګر TD-3-MO-AM انلاګ باس لاین ترکیب کارونکي لارښود

د مخ پینل ترتیب

Below is an image illustrating the front panel controls and connections of the TD-3-MO-AM synthesizer. Familiarize yourself with these components before operation.

شکل 1: Front panel of the Behringer TD-3-MO-AM Analog Bass Line Synthesizer. This image displays all knobs, buttons, and input/output jacks, including controls for Tune, Cutoff, Resonance, Envelope, Decay, Accent, Tempo, Wave, Track/Pattern Group, Mode, Gate, Slide Time, Sweep Speed, Filter FM, Volume, and various input/output ports.

2.1 پیک کول او تفتیش کول

Carefully remove the synthesizer from its packaging. Inspect the unit for any signs of damage during transit. Retain the original packaging for future transport or storage.

2.2 د بریښنا نښلول

Connect the provided power adapter to the DC IN port on the rear panel of the TD-3-MO-AM. Plug the adapter into a suitable power outlet. Ensure the power switch is in the OFF position before connecting power.

2.3 د آډیو تولید

Connect the AUDIO OUT jack (typically a 1/4" TS or TRS jack, though not explicitly listed in specs, common for synths) on the rear panel to your mixer, audio interface, or amplifier using a standard audio cable. For headphone monitoring, use the PHONES output.

۳.۴ د MIDI او USB اتصالونه

The TD-3-MO-AM supports MIDI and USB connectivity for integration with other musical equipment or a computer.

• میډي دننه/بهر: Use standard 5-pin DIN MIDI cables to connect to other MIDI devices for sequencing or control.
• USB: Connect the USB-A port (as per specifications) to your computer for MIDI over USB and firmware updates.

2.5 CV/Gate Connections

The synthesizer features various CV (Control Voltage) and Gate inputs/outputs for integration with modular synthesizers and other analog gear.

• ACCENT IN, SLIDE IN, GATE IN, CV IN: These inputs allow external control over corresponding parameters.
• SYNC IN, ACCENT OUT, GATE OUT, CV OUT, FILTER OUT: These outputs provide control signals to other devices.

3.1 بریښنا کول / بندول

To power on, ensure all connections are secure, then flip the power switch to the ON position. To power off, flip the switch to the OFF position and disconnect the power adapter.

3.2 Sound Generation Basics

The TD-3-MO-AM generates sound using an analog oscillator. Adjust the TUNE, پرې کول, اسانه, پرمختللي, DECAY، او اکسینټ knobs to shape the sound. The څپې switch selects between sawtooth and square waveforms.

3.3 Sequencer Operation

The built-in 16-step sequencer allows for programming bass lines. Use the موډ switch to select between WRITE and PLAY modes. In WRITE mode, you can input notes and parameters for each step. In PLAY mode, the sequencer will playback the programmed pattern.

• لیکنه: For creating and editing patterns.
• لوبه وکړه: For playing back patterns.
• TRK/PATT: Selects between Track and Pattern modes for sequencing.

تنظیم کړئ ټیمپو knob to control the playback speed of the sequencer.

3.4 Arpeggiator

The arpeggiator can generate rhythmic patterns from held notes. Refer to the detailed manual for specific arpeggiator modes and controls.

3.5 Filter and Overdrive

The 4-pole resonant lowpass filter is a key component of the TD-3-MO-AM's sound. Use the پرې کول او اسانه knobs to sculpt the tone. The ډیر control adds distortion and grit to the sound.

4.1 پاکول

To clean the unit, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid spraying liquids directly onto the unit.

4.2 ذخیره کول

When not in use for extended periods, store the synthesizer in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage.

4.3 د فرم ویئر تازه معلومات

په دوره یي ډول د بیرینګیر معاینه وکړئ website for firmware updates. Updates can provide new features, bug fixes, and performance improvements. Follow the instructions provided with the firmware update package carefully.

۶.۱ د غږ محصول نشته

• ډاډ ترلاسه کړئ چې د بریښنا اډاپټر په خوندي ډول وصل دی او واحد فعال دی.
• Check all audio cable connections from the TD-3-MO-AM to your mixer/interface/ampلايف
• Verify that the VOLUME knob on the TD-3-MO-AM is turned up.
• Confirm that your mixer/interface/ampلایفیر فعال دی او د هغې د ننوتلو کچه په سمه توګه تنظیم شوې ده.
• If using headphones, ensure they are properly plugged into the PHONES jack and the volume is adequate.

5.2 Sequencer Not Playing

• ډاډ ترلاسه کړئ موډ switch is set to PLAY.
• Verify that a pattern has been programmed and is selected.
• وګورئ ټیمپو knob; it might be set too low.
• If syncing externally, ensure the SYNC IN connection is active and receiving a valid clock signal.

5.3 MIDI/USB Connectivity Issues

• Ensure correct MIDI cable connections (MIDI OUT to MIDI IN, MIDI IN to MIDI OUT).
• For USB, verify the USB cable is securely connected to both the synthesizer and your computer.
• Check your computer's device manager or audio/MIDI settings to confirm the TD-3-MO-AM is recognized.
• Install any necessary drivers if prompted by your operating system (usually class-compliant, but check Behringer support).

7.1 د محصول تضمین

Behringer products typically come with a limited warranty covering manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Behringer webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

7.2 د پیرودونکي ملاتړ

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Behringer customer support. You can find contact information and additional resources on the official Behringer webسایټ: www.behringer.com.

For protection plans, refer to the options available at the point of purchase, such as those offered by Amazon:

• دوه کلن محافظتي پلان
• دوه کلن محافظتي پلان
• بشپړ ساتنه (میاشتنی پلان)