VONROC 1500W 216mm Electric Sliding Miter Saw Instruction Manual

1. د خوندیتوب لارښوونې

Always observe basic safety precautions when using this electric sliding miter saw to reduce the risk of fire, electric shock, and serious personal injury. Read all instructions carefully before operation.

د عمومي بریښنا وسیلې خوندیتوب

• د کاري ساحې خوندیتوب: د کار ساحه پاکه او ښه روښانه وساتئ. ګډوډ یا تیاره سیمې د پیښو لامل کیږي. د بریښنا وسایل په چاودیدونکو فضا کې مه کاروئ، لکه د اور اخیستونکي مایعاتو، ګازونو یا دوړو په شتون کې.
• بریښنایی خوندیتوب: د بریښنا د وسایلو پلګونه باید د ساکټ سره سمون ولري. هیڅکله پلګ په هیڅ ډول مه بدلوئ. د بدن د ځمکې یا ځمکې لاندې سطحو لکه پایپونو، ریډیټرونو، رینجونو او یخچالونو سره د تماس څخه ډډه وکړئ.
• شخصي خوندیتوب: Always wear eye protection (safety goggles) and hearing protection. Use a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.

د میټر سا ځانګړی خوندیتوب

• د تیغ خوندیتوب: Ensure the blade is sharp and correctly installed. Never attempt to cut freehand. Always use the material clamp and fence to secure the workpiece.
• د لیزر لارښود: Do not stare directly into the laser beam. The laser is a Class 2 laser product.
• د دوړو راټولول: Connect a dust extraction device or use the provided dust bag to minimize dust exposure.
• پیلول: The saw features a soft start system. Allow the blade to reach full speed before beginning a cut.

2. محصول ختم شوview

The VONROC 1500W 216mm Electric Sliding Miter Saw is designed for precise cutting of wood, laminate, and similar materials. It features a powerful motor, a sliding function for wider cuts, and a laser guide for accuracy.

اصلي اجزا

• Saw Head with Motor and Blade
• سلایډ ریلونه
• Base Plate / Turntable
• Miter Scale and Lock Handle
• Bevel Adjustment and Lock
• Workpiece Clamp
• د غزولو میزونه
• Dust Port and Dust Bag
• د لیزر لارښود

شکل ۱۴: بشپړ view of the VONROC 1500W 216mm Electric Sliding Miter Saw.

3. ترتیب کول

پیکنگ او مجلس

1. په احتیاط سره د بسته بندۍ څخه ټولې برخې لرې کړئ.
2. Inspect the saw for any damage that may have occurred during transit. Do not operate if damaged.
3. Attach the dust bag to the dust port at the rear of the saw head.
4. Install the extension tables on both sides of the base plate, securing them with the provided fasteners.

د اروا پورته کول

For stable operation, it is recommended to mount the miter saw to a workbench or a dedicated miter saw stand. Use the mounting holes in the base of the saw and appropriate hardware (not included) to secure it firmly.

د کنډک تنظیم کول

The fence provides support for the workpiece. Ensure it is properly aligned and secured before making any cuts. The fence can be adjusted for different cutting angles and material thicknesses.

Figure 2: The sliding mechanism and adjustable fence provide support and allow for wider cuts.

Laser Guide Alignment

The laser guide projects a line onto the workpiece, indicating the cutting path. To activate, press the laser button. If the laser line is not aligned with the blade's kerf, consult the troubleshooting section for adjustment instructions.

Figure 3: The integrated laser guide assists in precise cutting by projecting a visible line.

4. عملیات

د پرې کولو بنسټیز طرزالعملونه

1. خوندي کاري ټوټه: Place the workpiece firmly against the fence and base. Use the material clamp to hold it securely.
2. زاویه ټاکل: Adjust the miter angle by loosening the lock handle, rotating the turntable to the desired angle (e.g., 0°, 15°, 22.5°, 30°, 45°), and then tightening the lock handle.
3. Set Bevel: For bevel cuts, loosen the bevel lock, tilt the saw head to the desired angle (e.g., 0° to 45°), and tighten the lock.
4. د پیل اره: Press the trigger switch. Allow the blade to reach full speed before lowering it into the workpiece.
5. پرې کول: Slowly lower the saw head through the workpiece. For sliding cuts, pull the saw head towards you, lower it, and push it smoothly through the material.
6. Release Saw: کله چې پرې کول بشپړ شي، ټریګر خوشې کړئ او تیغ ته اجازه ورکړئ چې په بشپړه توګه ودریږي مخکې لدې چې د ارې سر پورته کړي.

Figure 4: The turntable allows for precise miter angle adjustments from -45° to +45°.

Figure 5: The saw head can be tilted for accurate bevel cuts up to 45°.

د سلایډ فعالیت

The sliding function allows for cutting wider workpieces than a standard miter saw. To use, unlock the sliding mechanism (if applicable), pull the saw head forward, lower the blade into the material, and push the saw head smoothly back through the workpiece. Ensure the workpiece is fully supported throughout the cut.

5. ساتنه

Regular maintenance ensures the longevity and safe operation of your miter saw. Always disconnect the saw from the power supply before performing any maintenance.

د تیغ بدلول

1. د بریښنا نښتې.
2. د تیغ ساتونکی پورته کړئ.
3. د ونې د بند تڼۍ د نیولو په وخت کې د ونې د مغز د خلاصولو لپاره چمتو شوي رنچ وکاروئ.
4. Carefully remove the old blade and install the new blade, ensuring the teeth are oriented correctly.
5. د ونې مغز په خوندي ډول ټینګ کړئ.

پاکول

• Regularly empty the dust bag or vacuum the dust port.
• Clean the saw's exterior with a damp ټوکر سخت کیمیاوي توکي مه کاروئ.
• Keep the sliding rails clean and free of debris for smooth operation.

غوړول

Apply a thin layer of light machine oil to the sliding rails periodically to ensure smooth movement of the saw head.

6. ستونزه حل کول

7. مشخصات

8. تضمین او ملاتړ

VONROC products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official VONROC website. For technical support, spare parts, or service inquiries, please contact VONROC customer service through their official channels.

مهرباني وکړئ د هر ډول تضمین ادعا لپاره د پیرود ثبوت وساتئ.