1. پیژندنه
Welcome to the user manual for your RadioMaster TX16S Mark II 2.4GHz 16 Channel EdgeTX Radio Transmitter. This manual provides essential information for the safe and effective operation, setup, and maintenance of your new radio transmitter. Please read this manual thoroughly before using the device.
2. د خوندیتوب معلومات
Always operate your radio transmitter responsibly and in accordance with local laws and regulations. Failure to do so may result in damage to property, serious injury, or death.
- د بیټرۍ خوندیتوب: Use only recommended battery types. Do not overcharge or over-discharge batteries. Store batteries in a safe, fireproof location.
- د چاپیریال شرایط: Avoid operating the transmitter in extreme temperatures, high humidity, or dusty environments.
- لاسوهنه: Be aware of potential radio interference from other devices. Always perform a range check before flight.
- د پروپیلر خوندیتوب: Always remove propellers from your aircraft when performing setup or maintenance to prevent accidental injury.
- څارنه: Children should only operate the transmitter under direct adult supervision.
3. محصول ختم شوview
The RadioMaster TX16S Mark II is a versatile 16-channel radio transmitter designed for various RC applications. It features a full-color touchscreen display and supports multiple protocols.
3.1 مخ View

شکل 3.1: مخکی view of the TX16S Mark II, showing the gimbals, switches, and touchscreen display.
3.2 شاته View

شکل 3.2: شاته view of the TX16S Mark II, highlighting the battery compartment and ergonomic grips.
3.3 کلیدي ځانګړتیاوې
- Improved internal circuitry and optimized power supply.
- Newly designed removable battery cover.
- Raised and flat grips for enhanced ergonomics.
- Improved S1/S2 knobs with center detents.
- 4.3-inch IPS Color Display with adjustable brightness.
- New 3.5mm audio headphone jack and built-in dual speakers.
- External Module Bay supporting Team Black Sheep MicroTX modules in CRSF mode with LUA scripts.
- Internal 4-in-1 Multi-protocol module for switching between internal RF and Crossfire via software.
- Supports EdgeTX and OpenTX firmware (EdgeTX installed by default).
۴.۲.۲ تفصیلي Views

Figure 3.3: The TX16S Mark II fits securely within its protective case.

Figure 3.4: The transmitter supports both EdgeTX and OpenTX firmware, offering flexibility in configuration.

Figure 3.5: Detail of the new V4.0 Hall Gimbals, which are adjustable without disassembly, ranging from 38° to 54°.

Figure 3.6: The improved S1/S2 knobs feature center detents for precise control, complemented by the vibrant 4.3-inch IPS color display for easy programming.

Figure 3.7: An updated design includes an improved LS/RS slider with tactile center detents for better feedback.

Figure 3.8: New features include a 3.5mm audio jack for headphones, an easily removable battery cover, and a DIY accessory socket for customization.

Figure 3.9: Connectivity options include a UART Port, Charging Port (USB-C), and an SD Card Slot for updates and storage.
4. ترتیب کول
4.1 د بیټرۍ نصب کول
The TX16S Mark II requires 18650 cells (not included) for operation. Insert the batteries into the battery tray, ensuring correct polarity. Then, slide the battery tray into the compartment at the rear of the transmitter and secure the newly designed removable battery cover.
4.2 د فرم ویئر تازه کول
The radio firmware (EdgeTX) and module firmware (Multiprotocol or ExpressLRS) can be updated. Updates are supported via USB-C online or offline using an SD card. Refer to the official RadioMaster website or EdgeTX documentation for the latest firmware and detailed update procedures.
4.3 Binding to Aircraft
To bind your TX16S Mark II to an aircraft, navigate to the 'Model Setup' menu on the touchscreen display. Select the appropriate RF Protocol for your receiver (e.g., Multi-Protocol or ELRS). Ensure the aircraft's receiver is in binding mode, then select the 'Bind' option on the transmitter. The transmitter will attempt to connect to the receiver. Successful binding is typically indicated by a solid light on the receiver.
5. چلول
۶.۲ د ښودنې نیویګیټ کول
The 4.3-inch TFT full-color touch display allows for intuitive navigation. Use the touchscreen to access menus, adjust settings, and monitor telemetry data. The S1/S2 knobs and LS/RS sliders provide additional tactile control for various functions.
۴.۴ د ماډل تنظیم او ترتیب
The EdgeTX firmware offers extensive customization options for your models. Within the 'Model Setup' menu, you can configure:
- معلومات: Define and assign control inputs from gimbals and switches.
- مخلوط: Create complex mixes for advanced control surfaces or functions.
- پایلې: Adjust channel limits, sub-trims, and servo directions.
- د الوتنې طریقې: Set up different flight modes with unique settings for various flight conditions.
- ټلیمیټری: Monitor real-time data from your aircraft, such as battery voltage, RSSI, and GPS coordinates (if supported by receiver).
6. ساتنه
Proper maintenance ensures the longevity and reliable performance of your TX16S Mark II.
- پاکول: Use a soft, dry cloth to clean the transmitter. Avoid abrasive cleaners or solvents.
- ذخیره کول: Store the transmitter in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- د ګیمبل پاملرنه: Keep gimbals free from dust and debris. The Hall gimbals are designed for durability but should be handled with care.
- د سافټویر تازه معلومات: د غوره فعالیت او نوي ځانګړتیاو ته د لاسرسي ډاډ ترلاسه کولو لپاره په منظم ډول د فرم ویئر تازه معلومات وګورئ او نصب کړئ.
7. ستونزه حل کول
This section addresses common issues you might encounter with your TX16S Mark II.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| ټرانسمیټر نه چالانیږي. | Low or no battery charge; incorrect battery installation. | Charge batteries; ensure batteries are installed with correct polarity. |
| له رسیدونکي سره نښلول کېدای نشي. | Incorrect protocol selected; receiver not in binding mode; too far/close during binding. | Verify RF protocol in Model Setup; ensure receiver is in binding mode; try binding at a closer distance (1-2 meters). |
| کنټرولونه بې ځوابه یا بې نظمه دي. | Binding issue; incorrect model setup; external interference. | Re-bind the receiver; check model settings (inputs, mixes, outputs); perform a range check in a clear area. |
| ټچ سکرین بې ځوابه دی. | د سافټویر خرابوالی؛ فزیکي زیان. | Restart the transmitter; ensure screen is clean and dry. If issue persists, contact support. |
8. تخنیکي مشخصات
| فیچر | مشخصات |
|---|---|
| د لیږد فریکونسی | 2.400GHz-2.480GHz |
| د لیږدونکي ماډل | Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401) OR Internal ELRS (SX1280) |
| د بریښنا لیږد | Internal 4-in-1: Max 100mw (protocol dependent); Internal ELRS: Max 250mw (adjustable) |
| اینټینا ګین | 2db (د بریښنا د تنظیم وړ لیږد) |
| د کار روان | 400mA |
| د کار Voltage | 6.6-8.4v DC |
| د ریموټ کنټرول فاصله | > 2km @ 22dbm |
| د راډیو فرم ویئر | EdgeTX |
| د موډل فرم ویئر | Multiprotocol-Module (4IN1) -OR- ExpressLRS (ELRS) |
| چینلونه | تر 16 چینلونو پورې (د رسیدونکي پورې اړه لري) |
| ښودل | 4.3-inch TFT full-colour touch display with 480 * 272 resolution |
| د ماډل خلیج | د JR مطابقت لرونکي ماډل خلیج |
| د کچې لوړول | د USB-C آنلاین / SD کارت آفلاین اپ گریڈ ملاتړ کوي |
| د محصول ابعاد | 11.3 x 7.24 x 5.08 انچه |
| د توکي وزن | ۲.۴۵ پونډه |
9. تضمین او ملاتړ
9.1 د تضمین معلومات
Please refer to the warranty card included with your product or visit the official RadioMaster webد تضمین د مفصلو شرایطو او شرایطو لپاره سایټ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
9.2 د پیرودونکي ملاتړ
For technical assistance, troubleshooting, or general inquiries, please contact RotorLogic customer support. You can find contact information on the RotorLogic brand store on Amazon or their official webسایټ





