SCULPFUN S10 Laser Engraver Instruction Manual

1. پیژندنه

The SCULPFUN S10 Laser Engraver is a high-performance laser cutting and engraving machine designed for precision work on various materials, including wood and metal. It features a 10W optical power laser, an industrial-grade X-axis linear slide rail, and an air assist nozzle for enhanced cutting and engraving capabilities.

Figure 1: The SCULPFUN S10 Laser Engraver with various engraved and cut samples, showcasinد هغې څو اړخیزه وړتیا.

2. د خوندیتوب معلومات

WARNING: Laser radiation can cause eye injury and skin burns. Always wear appropriate laser safety goggles and ensure the protective cover is installed during operation. Never look directly into the laser beam.

• ماشین بې پامه مه چلوئ.
• Ensure proper ventilation in the work area to dissipate fumes.
• Keep children under 14 years old away from the product. Children over 14 require adult supervision.
• Avoid strong impacts on the machine.
• Do not use the laser directly on specular reflection objects, as this may cause injury or damage the laser.
• Always place an A4 steel pad or similar protective material under the workpiece to protect your table from laser damage.

Figure 2: The adjustable laser eye shield provides protection during operation. Always wear additional safety goggles.

3. د بسته محتويات

د بکس خلاصولو پر مهال ډاډ ترلاسه کړئ چې ټولې برخې شتون لري او زیانمنې شوې نه دي:

Figure 3: All components included in the SCULPFUN S10 package. Ensure all parts are accounted for before assembly.

• SCULPFUN S10 Laser Engraver Frame
• 10W لیزر ماډل
• Air Assist Nozzle and Tube
• د بریښنا اډاپټر
• USB کیبل
• د لیزر خوندیتوب چشمې
• A4 Steel Pad
• د مجلس وسیلې او پیچ
• Sample Wood Pieces
• د کارونکي لارښود (دا لاسوند)

4. ترتیب کول

Follow these steps to assemble and prepare your SCULPFUN S10 Laser Engraver for first use:

1. چوکاټ مجلس: Assemble the aluminum frame components according to the included pictorial instructions. Ensure all screws are tightened securely.
2. د لیزر ماډل نصب کول: Carefully attach the 10W laser module to the X-axis gantry. Connect the necessary cables.
3. Air Assist Setup: Connect the air assist tube to the laser module's nozzle. If using an external air compressor (sold separately), connect it to the air assist tube.
4. د بریښنا او USB اتصال: Connect the power adapter to the machine and a power outlet. Connect the USB cable from the machine to your computer.
5. د سافټویر نصب کول: Install compatible laser engraving software such as LaserGRBL (for Windows) or LightBurn (for Windows and MAC). Refer to the software's documentation for detailed installation and setup.
6. د تمرکز سمون: Adjust the laser focus according to the instructions in your software or the laser module's specific guide. Proper focus is crucial for optimal engraving and cutting results.

5. چلول

Operating the SCULPFUN S10 involves preparing your design, setting parameters, and initiating the engraving or cutting process.

5.1. د موادو چمتو کول

• Place the material securely on the working area. Use clamps if necessary to prevent movement.
• Ensure the A4 steel pad is positioned underneath the material to protect the surface below.
• Verify the laser focus is correctly set for the material thickness.

5.2. د سافټویر عملیات

1. Open your chosen laser software (e.g., LightBurn, LaserGRBL).
2. خپل ډیزاین وارد کړئ یا جوړ کړئ.
3. Configure laser parameters (power, speed, passes) based on the material type and desired outcome. Refer to the software's material settings guide for recommended values.
4. مخکېview the job to ensure correct placement and scale.
5. Initiate the engraving/cutting process. Monitor the machine closely during operation.

Figure 4: Illustration of the 10W optical power laser with air assist, demonstrating its cutting capabilities on 3mm and 6mm plywood in a single pass. The air assist helps in achieving cleaner cuts by removing residue.

Figure 5: Comparison showing the cleaner cutting edge and lack of smoke stains achieved by the SCULPFUN S10 with air assist, compared to other lasers without it.

5.3. Key Features for Operation

• High Density 10W Laser Power: The S10's 10W laser provides strong cutting penetration and engraving capabilities, allowing it to cut high-density woods like MDF and walnut more easily.
• Industrial-grade Engraving Accuracy: Equipped with a high-precision anti-shake linear X-axis slide rail, the S10 minimizes wave line marks, resulting in more accurate engravings.
• Powerful High-Speed Air Assist: The advanced fluid mechanics design of the air assist nozzle can spray high-speed airflow up to 14.5m/s, significantly improving cutting efficiency and quality when connected to a compatible air compressor (30L/min 0.03Mpa recommended, purchased separately).

6. ساتنه

منظم ساتنه ستاسو د لیزر نقاشۍ اوږد عمر او غوره فعالیت تضمینوي.

• د لیزر لینز پاک کړئ: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam clarity and power.
• غوړول خوځنده برخې: Apply a small amount of lubricant to the linear slide rails and belts as recommended in the detailed product manual to ensure smooth movement.
• د لوز پیوستون لپاره چیک کړئ: Regularly inspect all electrical and mechanical connections to ensure they are secure.
• پاک کثافات: Remove any accumulated dust, debris, or material scraps from the machine's working area and internal components.

7. ستونزه حل کول

عامې ستونزې او د هغوی احتمالي حل لارې:

8. مشخصات

9. تضمین او ملاتړ

SCULPFUN provides a د 12 میاشتو تضمین for the S10 Laser Engraver. For any questions, technical assistance, or warranty claims, please contact SCULPFUN customer support directly. Refer to the contact information provided in your product packaging or on the official SCULPFUN webسایټ

For detailed machine instructions and parameter settings, always refer to the comprehensive manual provided with your product.