د ZKTeco IN01-A/3G د ګوتو نښې وخت حاضري او د لاسرسي کنټرول ټرمینل کارونکي لارښود

1. پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of the ZKTeco IN01-A/3G Fingerprint Time Attendance and Access Control Terminal. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. محصول ختم شوview

The ZKTeco IN01-A/3G is a sophisticated 3-inch TFT screen terminal designed for both time attendance and access control applications. It integrates advanced fingerprint recognition technology to provide secure and efficient user identification.

شکل 1: مخکی view of the ZKTeco IN01-A/3G terminal, showing the 3-inch TFT screen, numeric keypad, navigation buttons, and the fingerprint sensor with an illuminated ring.

Key components include a high-resolution TFT display for user interaction, a numeric keypad for data entry, navigation buttons for menu control, and a robust fingerprint sensor for biometric authentication.

3. ځانګړتیاوې

• د ګوتو نښان ظرفیت: Supports storage for up to 3000 fingerprints.
• ښکاره کول: Equipped with an LCD (3-inch TFT screen) for clear visual feedback.
• Identification Method: Primarily uses fingerprint recognition for user authentication.
• پایښت: Features a scratch-proof design for enhanced longevity.
• فعالیت: Combines time attendance tracking with access control capabilities.

4. ترتیب کول

4.1 پیک کول او تفتیش کول

Carefully unpack the device and verify that all components are present and undamaged. Report any discrepancies to your supplier immediately.

4.2 د آلې نصبول

1. Choose a suitable location for installation, ensuring it is protected from direct sunlight, extreme temperatures, and moisture.
2. Use the provided mounting template to mark drilling positions on the wall.
3. سوراخونه ډرل کړئ او دیوال پلګونه دننه کړئ.
4. د پیچونو په کارولو سره د نصب کولو پلیټ دیوال سره خوندي کړئ.
5. Attach the IN01-A/3G terminal to the mounting plate.

4.3 د بریښنا نښلول

Connect the provided power adapter to the device's power input port and then plug it into a standard electrical outlet. Ensure the power supply matches the device's requirements.

۴.۳ د شبکې اتصال (اختیاري)

If network connectivity is required for data transfer or remote management, connect an Ethernet cable to the device's LAN port and to your network router/switch.

4.5 ابتدايي ترتیب

Upon first power-up, the device may prompt for initial setup, including date, time, and administrator registration. Follow the on-screen instructions to complete these steps.

5. عملیاتي لارښوونې

5.1 Administrator Registration

The first step is to register an administrator fingerprint. This user will have access to all device settings and user management functions.

1. فشار ورکړئ مینو تڼۍ
2. ته لاړشئ د کارن مدیریت او انتخاب کړئ نوی کارن.
3. Enter a User ID and then select د ګوتو نښان ثبت کړئ.
4. Place your finger on the sensor three times as prompted, ensuring full contact each time.
5. Set the user's privilege level to مدیر.
6. ترتیبات خوندي کړئ.

5.2 User Fingerprint Enrollment

To allow other users to record attendance or gain access, their fingerprints must be enrolled.

1. Access the menu as an administrator.
2. ته لاړشئ د کارن مدیریت او انتخاب کړئ نوی کارن or select an existing user to add a fingerprint.
3. Enter or confirm the User ID.
4. وټاکئ د ګوتو نښان ثبت کړئ and follow the on-screen prompts to scan the user's finger three times.
5. Save the user's information.

5.3 Recording Attendance

Users can record their attendance by simply placing their enrolled finger on the fingerprint sensor. The device will provide visual and audible confirmation of a successful scan.

5.4 Access Control Functionality

For access control, the device will verify the enrolled fingerprint against its database. Upon successful verification, it will trigger the connected access mechanism (e.g., door lock) according to the configured access rules.

6. ساتنه

6.1 د وسیلې پاکول

Regularly clean the fingerprint sensor and screen with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents, as these can damage the surface.

6.2 د معلوماتو بیک اپ

It is recommended to regularly back up attendance records and user data to an external storage device (e.g., USB drive) or a connected server to prevent data loss.

6.3 د فرم ویئر تازه معلومات

په دوره یي ډول د ZKTeco چارواکي وګورئ website for firmware updates. Keeping the device's firmware up-to-date ensures optimal performance and access to new features.

7. ستونزه حل کول

• وسیله نه فعالیږي:
  • ډاډ ترلاسه کړئ چې د بریښنا اډاپټر په خوندي ډول د وسیلې او کاري بریښنا سایټ دواړو سره وصل دی.
  • ډاډ ترلاسه کړئ چې د بریښنا سایټ فعال دی.
• د ګوتو نښې نه پیژندل کیږي:
  • ډاډ ترلاسه کړئ چې ستاسو ګوته پاکه او وچه ده.
  • Place your finger flat and centered on the sensor.
  • Try enrolling the fingerprint again if the issue persists.
  • Clean the fingerprint sensor surface.
• Cannot access menu:
  • Ensure you are using an enrolled administrator fingerprint or password.
• د معلوماتو د لیږد مسلې:
  • د شبکې کیبل اتصالونه وګورئ.
  • Verify network settings on the device and server.

8. مشخصات

9. تضمین او ملاتړ

د تضمین معلوماتو او تخنیکي ملاتړ لپاره، مهرباني وکړئ د خپل پیرود سره چمتو شوي اسنادو ته مراجعه وکړئ یا رسمي ZKTeco ته مراجعه وکړئ. webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.

For further assistance, you may contact ZKTeco customer service or your local distributor.