Monport 30W Fiber Laser Engraver User Manual

1. پیژندنه

Welcome to the user manual for your Monport 30W Fiber Laser Engraver. This document provides essential information for the safe and effective operation, setup, and maintenance of your engraving machine. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury.

2. د خوندیتوب معلومات

Operating a laser engraver involves inherent risks. Adhering to safety guidelines is paramount to prevent accidents and ensure safe operation.

• د لیزر طبقه بندي: This device is a Class 4 laser product. Direct exposure to the laser beam can cause severe eye and skin damage.
• د سترګو ساتنه: Always wear appropriate laser safety goggles that are rated for the laser's wavelength (1064nm) when the machine is in operation.
• وینټیلیشن: Ensure adequate ventilation in the work area to dissipate fumes and particles generated during engraving. Some materials may produce hazardous fumes.
• اضطراري تمځای: Familiarize yourself with the location and function of the emergency stop button. In case of any malfunction or emergency, press this button immediately to cut power to the laser.
• د موادو مطابقت: Only engrave materials that are safe for fiber lasers. Avoid materials that can produce toxic fumes or catch fire easily.
• څارنه: هیڅکله ماشین د عملیاتو پرمهال مه پریږدئ.

3. محصول ختم شوview

The Monport 30W Fiber Laser Engraver is designed for precise marking and engraving on various metal surfaces. It features a robust design and user-friendly controls.

Figure 3.1: Monport 30W Fiber Laser Engraver, showing the main engraving unit and the separate control box.

کلیدي ځانګړتیاوې:

• 30W Raycus Fiber Laser Source: Provides a powerful and stable laser output with an estimated lifetime of up to 100,000 hours.
• Integrated Power Supply & Cooling: Features an integrated power supply for stability and two cooling fans for efficient heat dissipation.
• Advanced Workspace: Equipped with a 5.9" x 5.9" (150mm x 150mm) built-in workspace grid and removable positioning bars for precise material placement.
• Red Dot Pointer: An external red dot locator calibrates with the laser's scanner for quick and accurate focus setup.
• لاسي تمرکز: A focus-height wheel and a vertical ruler allow for convenient and precise manual focusing on various material thicknesses.
• Upgraded Button Design: Combines power controls into a single button and includes a dedicated emergency stop button for enhanced safety.
• LightBurn Compatibility: Fully compatible with LightBurn software for design and control.

شکل 3.2: پایview of key features including max marking speed, fiber laser source lifetime, workspace, LightBurn support, laser power, precise focus, and rotary axis support.

Figure 3.3: Labeled components of the Monport Fiber Laser Marking Machine, including the GALVO-TECH System, Handle, Power Button, Scaleplate, Height Adjustment Knob, Field lens, Fiber optic transmission line, and Worktable.

غوښتنلیکونه:

This fiber laser engraver is suitable for marking and engraving on a wide range of materials, primarily metals.

• فلزات: Stainless steel, gold, silver, brass, aluminum, and more.
• نور توکي: Certain plastics and coated materials (testing recommended).

شکل 3.4: مثالamples of items that can be engraved, such as keyboards, metal items, electronic equipment, circuitry, and jewelry.

۴. د تنظیم لارښوونې

Follow these steps to set up your Monport 30W Fiber Laser Engraver.

1. بسته بندي کول: په احتیاط سره د بسته بندۍ څخه ټولې برخې لرې کړئ. د بار وړلو زیان لپاره معاینه کړئ.
2. ځای په ځای کول: Place the engraving unit and control box on a stable, level, and sturdy surface. Ensure sufficient space around the machine for ventilation and safe operation.
3. Component Connection: Connect the laser head to the control box using the provided fiber optic transmission line. Ensure all connections are secure.
4. د بریښنا پیوستون: Connect the power cable to the control box and then to a grounded electrical outlet.
5. د سافټویر نصب کول: Install LightBurn software on your computer. The Monport 30W Fiber Laser Engraver is compatible with macOS, Windows 7, 8, 10, and 11.

Figure 4.1: The Monport fiber laser machine connected to a laptop, illustrating its compatibility with multiple operating systems including macOS and Windows versions.

5. عملیاتي لارښوونې

This section outlines the basic steps for operating your Monport 30W Fiber Laser Engraver.

5.1 Powering On and Off:

• کلیدي سویچ: Insert the key into the key switch on the control box and turn it to the 'ON' position.
• د بریښنا تڼۍ: Press the main power button to activate the machine.
• اضطراري تمځای: In case of an emergency, press the large red emergency stop button to immediately cut power. To reset, twist the button clockwise and then press the power button again.

Figure 5.1: The upgraded button design featuring a key switch for security, a power button for operation, and an emergency stop button for immediate shutdown.

5.2 Focusing the Laser:

Accurate focusing is critical for optimal engraving results.

1. د موادو ځای په ځای کول: Place your material on the worktable.
2. Red Dot Pointer: Activate the red dot pointer. The two red dots should converge into a single point on the surface of your material when the laser is in optimal focus.
3. لوړوالی تنظیم کړئ: Rotate the focus-height wheel on the vertical supporting tower to adjust the distance between the laser head and the material until the red dots converge. Use the integrated ruler for precise height measurements.

5.3 Engraving Process:

1. د ډیزاین چمتووالی: Create or import your design in LightBurn software.
2. د پیرامیټر ترتیبات: Adjust laser parameters (power, speed, frequency) in LightBurn according to your material and desired effect. Refer to material testing guides for recommended settings.
3. مخکېview: Use the red dot pointer's preview mode to visualize the engraving area on your material before starting the job.
4. نقاشي پیل کړئ: Initiate the engraving process from LightBurn. Monitor the machine closely during operation.

6. ساتنه

Regular maintenance ensures the longevity and optimal performance of your Monport 30W Fiber Laser Engraver.

• د لینز پاکول: Periodically inspect and clean the F-theta scanning lens using specialized lens cleaning solutions and wipes. Avoid touching the lens with bare hands.
• د کار ساحه: د کار میز او شاوخوا ساحه د کثافاتو او دوړو څخه پاک وساتئ.
• د یخولو پرستار: Ensure the cooling fans on the fiber laser and control unit are free from obstructions to maintain proper heat dissipation.
• د کیبل پیوستون: په منظم ډول د کیبل ټولې اړیکې د ټینګښت او د اغوستلو نښو لپاره وګورئ.

7. ستونزه حل کول

دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو ورسره مخ کیدی شئ او احتمالي حلونه وړاندې کوي.

If you encounter issues not listed here or cannot resolve a problem, please contact Monport customer support.

8. تخنیکي مشخصات

Below are the technical specifications for the Monport 30W Fiber Laser Engraver (Model CFCG521).

Figure 8.1: Diagram illustrating the physical dimensions and key parameters of the Monport Fiber Laser Engraver.

۸. د تضمین معلومات او د پیرودونکو ملاتړ

For warranty details, technical assistance, or customer support, please refer to the official Monport website or contact Monport Direct, the seller of this product. Keep your purchase receipt and model number (CFCG521) handy when contacting support.

Monport Official Webسایټ: www.monportlaser.com