1. پیژندنه
This instruction manual provides essential information for the proper installation, operation, and maintenance of the Teltonika PR1KRD30 Wi-Fi Dual-Band Magnetic SMA Antenna. This antenna is designed to enhance Wi-Fi connectivity for compatible Teltonika routers, specifically the RUTX10, RUTX11, RUTX12, RUTX14, and RUTXR1 models.
The PR1KRD30 antenna features dual-band support, a magnetic mounting base for flexible placement, and an RP-SMA male connector for secure attachment.
2. د بسته محتويات
- 1x Teltonika PR1KRD30 Wi-Fi Dual-Band Magnetic SMA Antenna
3. ترتیب او نصب کول
Follow these steps to properly set up your Teltonika PR1KRD30 antenna:
- Identify Connection Ports: Locate the Wi-Fi antenna ports on your compatible Teltonika router (RUTX10, RUTX11, RUTX12, RUTX14, or RUTXR1). These ports are typically labeled for Wi-Fi antennas.
- انتن وصل کړئ: Carefully align the RP-SMA male connector of the PR1KRD30 antenna with the corresponding Wi-Fi antenna port on your router. Gently screw the connector clockwise until it is finger-tight. Avoid over-tightening to prevent damage.
- د انتن ځای ونیسئ: The PR1KRD30 features a magnetic base. Place the antenna on a flat, metallic surface for optimal stability and signal reception. Consider placing it in an elevated position or near a window for improved signal strength. The antenna cable length is 1.5 meters, allowing for flexible placement.
- پیوستون تایید کړئ: Ensure the antenna is securely attached and positioned. Once connected, power on your router and verify Wi-Fi functionality.

Image: The Teltonika PR1KRD30 antenna, showing its magnetic base and the RP-SMA male connector at the end of its 1.5-meter cable. This antenna is designed for enhancing Wi-Fi signals for compatible Teltonika routers.
4. عملیاتي لارښوونې
The Teltonika PR1KRD30 antenna operates passively to enhance the Wi-Fi signal of your connected router. No specific user configuration is required for the antenna itself once it is physically connected.
- دوه اړخیز عملیات: The antenna supports both 2.4 GHz (2400-2483.5 MHz) and 5 GHz (5150-5905 MHz) Wi-Fi frequency bands, providing flexibility for various network environments.
- د سیګنال اصلاح کول: For optimal performance, ensure the antenna is positioned away from large metal objects or other sources of electromagnetic interference. Experiment with different placements to find the best signal strength.
- د راټر تنظیمات: Any Wi-Fi network configuration, such as SSID, password, or channel selection, is managed through your connected Teltonika router's interface. Refer to your router's manual for these settings.
5. ساتنه
The Teltonika PR1KRD30 antenna requires minimal maintenance to ensure long-term performance.
- پاکول: Periodically wipe the antenna's exterior with a soft, dry cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
- د چاپیریال شرایط: The antenna is designed to operate within a temperature range of -40 °C to +75 °C. Avoid exposing it to extreme temperatures outside this range or to excessive moisture.
- فزیکي معاینه: Regularly check the cable and connector for any signs of damage. Ensure the magnetic base remains securely attached to its mounting surface.
6. ستونزه حل کول
که تاسو د خپل انتن سره ستونزې تجربه کوئ، نو لاندې د ستونزو حل کولو ګامونه په پام کې ونیسئ:
- Poor Wi-Fi Signal:
- Ensure the antenna is securely connected to the router's Wi-Fi port.
- Relocate the antenna to a different position, preferably higher or closer to the area requiring better coverage, and away from obstructions.
- Verify that your router's Wi-Fi settings are correctly configured (e.g., correct frequency band selected if applicable).
- د وای فای اتصال نشته:
- Confirm the antenna connector is fully tightened.
- Test with another compatible antenna if available, to rule out an antenna fault.
- Check your router's status indicators and settings to ensure its Wi-Fi module is active.
- فزیکي زیانونه: If the antenna or cable appears damaged, discontinue use and contact your reseller or Teltonika support for assistance.
7. مشخصات
| فیچر | مشخصات |
|---|---|
| ماډل | PR1KRD30 |
| د فریکونسی رینج | 2400-2483.5 MHz / 5150-5905 MHz (Dual-Band) |
| قطبي کول | عمودی |
| ګټي | 3 dBi |
| VSWR | <2.0 |
| خنډ | 50 اوم |
| د کیبل ډول | RG174 |
| د کیبل اوږدوالی | 1.5 متره |
| نښلونکی | RP-SMA نارینه |
| د نصبولو طریقه | مقناطیسي |
| د عملیاتي حرارت درجه | -40 °C څخه تر +75 °C |
| مطابقت | Teltonika RUTX10, RUTX11, RUTX12, RUTX14, RUTXR1 Routers |
8. تضمین او ملاتړ
For warranty information, please refer to the documentation provided with your purchase or contact your authorized Teltonika reseller. General product support and technical assistance can be obtained through the official Teltonika Networks website or by contacting their customer support channels.





