ګولډچAMP GC-36D Digital Capacitance Meter

1. پیژندنه

This manual provides detailed instructions for the safe and effective use of the GOLDCHAMP GC-36D Digital Capacitance Meter. This portable device is designed for precise digital measurement of capacitance, suitable for identifying unknown capacitance values and testing capacitors in cables, switches, and PCB circuits. Please read this manual thoroughly before operation.

2. د خوندیتوب معلومات

Always observe basic safety precautions when using electrical testing equipment to reduce the risk of fire, electric shock, or personal injury. Keep the device dry and clean. Do not attempt to measure live circuits or capacitors that are not fully discharged. Ensure the battery compartment is securely closed during operation.

3. محصول ختم شوview

Familiarize yourself with the components of your GOLDCHAMP GC-36D Digital Capacitance Meter:

Image 3.1: Front panel layout of the GOLDCHAMP GC-36D Digital Capacitance Meter, showing the LCD display, Data-Hold button, Backlight button, Function Switch, ZERO adjustment knob, and Cx+, Cx- Input Jacks.

• د LCD نندارې: د اندازه کولو لوستل او شاخصونه ښیې.
• Data-Hold Button: په ښودنه کې اوسنی لوستل کنګل کوي.
• د شاته رڼا تڼۍ: د ټیټ رڼا په شرایطو کې د ښه لید لپاره د ښودنې بیک لایټ فعالوي.
• د فعالیت سویچ: Used to select the desired capacitance measurement range or turn the device off.
• ZERO Adjustment Knob: Used to zero out residual capacitance before measurement.
• Cx+, Cx- Input Jacks: Connectors for the test leads.

4. ترتیب کول

4.1 د بیټرۍ نصب کول

The GOLDCHAMP GC-36D requires one 9V (6F22) battery for operation. To install or replace the battery:

1. ډاډ ترلاسه کړئ چې وسیله بنده ده.
2. د میټر په شا کې د بیټرۍ کڅوړه ومومئ.
3. د بیټرۍ پوښ خلاص کړئ.
4. یو نوی 9V بیټرۍ دننه کړئ، سم قطبي حالت (+/-) وګورئ.
5. د بیټرۍ پوښ په خوندي ډول وتړئ.

انځور 4.1: شاته view of the GOLDCHAMP GC-36D showing the battery compartment and the integrated stand. An inset image demonstrates the insertion of a 9V battery.

۶.۲ د ټیسټ لیډونو نښلول

Connect the red test lead to the Cx+ input jack and the black test lead to the Cx- input jack. Ensure a firm connection for accurate readings.

5. عملیاتي لارښوونې

۸ پاور آن/بند

Rotate the Function Switch from the "OFF" position to any desired measurement range to power on the device. To power off, rotate the Function Switch back to the "OFF" position.

5.2 صفر تعدیل

Before measuring, especially for small capacitance values, it is recommended to zero the meter. With the test leads disconnected from any component, select the desired range and rotate the ZERO adjustment knob until the display reads "000" or as close to zero as possible.

5.3 Selecting Measurement Range

The Function Switch allows selection of various capacitance ranges. Choose a range that is appropriate for the capacitor being measured. If the capacitance value is unknown, start with a higher range and decrease it until a stable and accurate reading is obtained.

Image 5.1: The GOLDCHAMP GC-36D Digital Capacitance Meter displaying a measurement, illustrating the test range capabilities from 200pF to 20mF.

Available ranges include:

• 200pF
• 2000pF
• 20nF
• 200nF
• 2uF
• 20uF
• 200uF
• 2000uF
• 20mF

۳.۱ د اندازه کولو ترسره کول

1. Ensure the capacitor to be measured is fully discharged before connecting it to the meter.
2. Connect the test leads to the capacitor terminals.
3. Read the capacitance value displayed on the LCD.

5.5 د ډیټا هولډ فعالیت

Press the "HOLD" button to freeze the current reading on the LCD. Press it again to release the hold and resume live measurements.

۷.۶ د شاته رڼا فعالیت

Press the "Backlight" button to illuminate the LCD display. This is useful in dimly lit environments. Press it again to turn off the backlight.

Image 5.2: The GOLDCHAMP GC-36D Digital Capacitance Meter with its backlight activated, enhancing visibility of the LCD display in low-light conditions.

6. ساتنه

6.1 پاکول

Wipe the meter with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the device.

6.2 د بیټرۍ بدلول

When the battery indicator appears on the display, replace the 9V battery as described in Section 4.1. Remove the battery if the meter will not be used for an extended period to prevent leakage.

6.3 ذخیره کول

Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.

7. ستونزه حل کول

8. مشخصات

9. تضمین او ملاتړ

The GOLDCHAMP GC-36D Digital Capacitance Meter comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact GOLDCHAMP customer support. If you encounter any issues or require technical assistance, please reach out to the seller or manufacturer directly for support.