Pro-Ject Debut PRO S Turntable User Manual

پیژندنه

This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject Debut PRO S Turntable. Please read these instructions carefully before using your turntable to ensure optimal performance and longevity of the product.

د بسته محتويات

Before proceeding with setup, verify that all components are present in the packaging:

• Pro-Ject Debut PRO S Turntable Unit
• Pick it S2 C integrated cartridge/headshell
• 10" Aluminum S-Shaped Tonearm (pre-installed)
• Precision aluminum platter with TPE damping
• TPE-Damped Die-Cast Aluminum Record Platter
• دوړو پوښ
• د پریمیم نیم متوازی فونو کیبل
• د بریښنا رسول
• د وزن ضد
• د سکیټ ضد وزن
• Setup tools (e.g., alignment protractor, stylus force gauge)

چمتو کول

Proper setup is crucial for the performance of your turntable. Follow these steps carefully.

۱. خلاصول او ځای پر ځای کول

Carefully remove all components from the packaging. Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and vibrations. Ensure adequate ventilation around the unit.

Image: The Pro-Ject Debut PRO S Turntable, showcasing its sleek satin black finish and the S-shaped tonearm. This view highlights the overall design and footprint of the unit, important for placement considerations.

The turntable features height-adjustable TPE-damped metal feet. Adjust these feet to ensure the turntable chassis is perfectly level. This minimizes resonance and improves playback stability.

انځور: یو زاویه لرونکی view from below the turntable, illustrating the motor suspension system and the adjustable TPE-damped metal feet. Proper adjustment of these feet is essential for leveling the turntable and isolating it from vibrations.

۲. د پلیټ او کمربند نصبول

Carefully place the TPE-damped die-cast aluminum record platter onto the spindle. Locate the drive belt and loop it around the motor pulley and the sub-platter rim. Ensure the belt is not twisted.

Image: A schematic diagram illustrating the turntable's platter and belt drive mechanism. This visual aid helps in correctly installing the drive belt around the motor pulley and the sub-platter.

۳. د ټوني وسلو او کارتریج تنظیم کول

The Debut PRO S comes with a 10" S-shaped aluminum tonearm and a Pick it S2 C integrated cartridge/headshell pre-installed. You will need to balance the tonearm and set the tracking force.

1. د ټونر بازو متوازن کړئ: Gently release the tonearm clamp. While supporting the tonearm, rotate the counterweight until the tonearm floats freely and horizontally.
2. د تعقیب ځواک تنظیم کړئ: Once balanced, rotate the tracking force scale ring on the counterweight to '0' without moving the counterweight itself. Then, rotate the entire counterweight counter-clockwise until the desired tracking force (typically specified by the cartridge manufacturer, usually around 1.8g for the Pick it S2 C) is indicated on the scale.
3. د انټي سکیټ تنظیم کړئ: Attach the anti-skate weight to the small fishing line and loop it over the anti-skate post. The recommended setting for the Pick it S2 C cartridge is typically the second groove from the tonearm pivot.

انځور: یو مفصل view of the S-shaped tonearm, highlighting the counterweight and anti-skate mechanism. This image is crucial for understanding the physical components involved in balancing the tonearm and setting the tracking force.

Image: A close-up of the tonearm's pivot area, clearly showing the anti-skate weight and its attachment point. This detail assists users in correctly setting the anti-skate force.

The tonearm also supports VTA (Vertical Tracking Angle) and Azimuth adjustment for fine-tuning cartridge performance. Refer to advanced setup guides if you wish to adjust these parameters.

4. ارتباطات

Connect the premium semi-symmetrical phono cable from the turntable's RCA outputs to the phono input of your ampلایفیر یا فونو پریamplifier. Ensure the ground wire is connected to the ground terminal on your amplifier to prevent hum.

Connect the power supply to the turntable's power input and then to a suitable wall outlet.

عملیاتي لارښوونې

Once set up, operating your Pro-Ject Debut PRO S Turntable is straightforward.

1. Powering On and Speed Selection

Locate the power switch, typically on the underside or side of the plinth. Turn the turntable on. The Debut PRO S supports multiple speeds, including 33 1/3, 45, and 78 RPM. Adjust the speed according to the record you are playing. For 78 RPM records, a special stylus may be required.

انځور: یو سر view of the Pro-Ject Debut PRO S Turntable, providing a clear perspective of the platter, tonearm, and the overall layout. This angle is useful for understanding the operational components.

2. د ریکارډ غږول

1. یو ریکارډ په تخته کې ځای په ځای کړئ.
2. Ensure the correct playback speed is selected.
3. د کیوینګ لیور په کارولو سره په نرمۍ سره ټونرمام پورته کړئ.
4. Position the stylus over the lead-in groove of the record.
5. د کیوینګ لیور ورو ورو ښکته کړئ ترڅو سټایلس د ریکارډ پر سر راښکته شي.
6. At the end of the record, lift the tonearm using the cueing lever and return it to the tonearm rest. Secure it with the tonearm clamp.

ساتنه

Regular maintenance will help preserve the performance and appearance of your turntable.

• د چیسس پاکول: The turntable features an 8-coat hand-painted satin black MDF chassis. Use a soft, dry, lint-free cloth to gently wipe the surface. Avoid abrasive cleaners or solvents.
• د سټایلس پاکول: Use a dedicated stylus cleaning brush or fluid to carefully clean the stylus before or after each play. Always brush from back to front.
• Dustcover Care: The included dustcover protects the turntable from dust. Clean it with a soft, damp ټوکر سخت کیمیاوي توکي مه کاروئ.
• د کمربند معاینه: Periodically inspect the drive belt for wear or stretching. Replace if necessary to maintain accurate playback speed.

د ستونزو حل کول

If you encounter issues with your turntable, refer to the following common problems and solutions.

مشخصات

تضمین او ملاتړ

د تضمین معلومات: Specific warranty terms and conditions for the Pro-Ject Debut PRO S Turntable are typically provided with the product packaging or can be found on the official Pro-Ject Audio Systems webسایټ. مهرباني وکړئ د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

د پیرودونکي ملاتړ: For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject Audio Systems customer support or your authorized dealer. Contact information can usually be found on the manufacturer's webسایټ یا د محصول اسنادو کې.