پیژندنه
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ECHO eFORCE 56V DCS-2500T Top Handle Chainsaw. This chainsaw is designed for professional and demanding tasks, offering superior performance and lightweight handling.
د خوندیتوب معلومات
Always read and understand all safety warnings and instructions before operating the chainsaw. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
د عمومي خوندیتوب مقررات
- Wear appropriate personal protective equipment (PPE) including head protection, eye protection, hearing protection, gloves, and safety footwear.
- Keep all bystanders, children, and pets at least 50 feet (15 meters) away from the work area.
- Do not operate the chainsaw in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- تل مناسب پښه او توازن وساتئ. له حده زیات مه ځئ.
- Avoid accidental starting. Ensure the power button is off before picking up or carrying the tool.
Chainsaw Specific Safety
- Always hold the chainsaw firmly with both hands when operating.
- Be aware of kickback. Kickback may occur when the moving chain contacts an object at the upper quadrant of the guide bar or when the wood closes in and pinches the saw chain in the cut.
- Do not operate the chainsaw with one hand. One-handed operation may result in serious injury to the operator, helpers, or bystanders.
- Ensure the chain brake is engaged when starting the chainsaw and when moving between cuts.
- په منظم ډول د زنځیر فشار او غوړ چک کړئ.
چمتو کول
Your ECHO DCS-2500T chainsaw requires minimal assembly before first use.
د بسته محتويات
- ECHO DCS-2500T Chainsaw Unit
- 12-inch Guide Bar
- چینه ولیده
- 56V 2.5Ah eFORCE Battery
- eFORCE Battery Charger
- د لارښود بار پوښ
- د آپریټر لارښود
د مجلس لارښوونې
- Install Guide Bar and Chain:
Remove the side cover by loosening the bolt.
Carefully place the chain around the drive sprocket and then align it with the groove of the guide bar.
Position the guide bar and chain onto the chainsaw body, ensuring the chain tension pin fits into the hole on the guide bar.
Replace the side cover and hand-tighten the bolt. Do not fully tighten yet.
Image: A user demonstrating the assembly of the chainsaw, highlighting the guide bar and chain attachment point.
- د چین رنځ تنظیم کړئ:
Use the chain tensioning screw (usually located on the side cover) to adjust the chain tension. The chain should be snug against the guide bar but still able to be pulled freely by hand.
Once tension is correct, fully tighten the side cover bolt.
- Fill Oil Reservoir:
Locate the oil reservoir cap on the chainsaw body.
Fill the reservoir with high-quality bar and chain oil. Do not use motor oil or other lubricants.
Image: The Echo DCS-2500T chainsaw, its battery, and charger. The oil reservoir cap is visible on the chainsaw body.
د بیټرۍ چارج کول
- بیټرۍ چارج کړئ:
Insert the 56V eFORCE battery into the charger. Ensure it clicks into place.
چارجر د معیاري بریښنا سایټ سره وصل کړئ.
The charger's LED indicators will show the charging status (e.g., red for charging, green for fully charged).
د لومړي استعمال څخه دمخه بیټرۍ ته اجازه ورکړئ چې په بشپړه توګه چارج شي.
- بیټرۍ نصب کړئ:
یوځل چې په بشپړ ډول چارج شي ، بیټرۍ له چارجر څخه لرې کړئ.
Insert the battery into the battery compartment of the chainsaw until it locks securely.
عملیاتي لارښوونې
د Chainsaw پیل کول
- ډاډ ترلاسه کړئ چې د زنځیر بریک خلاص شوی دی (د مخکینۍ لاستی په لور بیرته راښکته شوی).
- Press the power button (usually indicated by a power symbol) to turn on the chainsaw. A green indicator light will illuminate.
- Grasp the front handle with your left hand and the rear handle with your right hand.
- Depress the safety lock-out button (if present) and then squeeze the trigger to start the chain.
د پرې کولو تخنیکونه
- لامبو وهل: Remove branches from a fallen tree. Work from the bottom up, cutting small branches first.
- باک کول: Cut a fallen log into sections. Use a sawhorse or elevated support to prevent the chain from hitting the ground.
- غورځول: (For experienced users only) Carefully plan the felling direction, clear the area, and make proper felling cuts.
د چینسا بندول
Release the trigger. The chain will stop immediately.
Engage the chain brake by pushing it forward.
Press the power button to turn off the chainsaw for storage or extended breaks.
ساتنه
منظم ساتنه غوره فعالیت تضمینوي او ستاسو د زنځیر آرې ژوند اوږدوي.
د هر استعمال وروسته
- Clean the Chainsaw: Remove sawdust, chips, and debris from the guide bar, chain, and motor housing.
- د زنځیر فشار وګورئ: Adjust if necessary.
- د تیلو کچه چیک کړئ: Refill the bar and chain oil reservoir.
- Inspect Chain: Check for dullness, damage, or loose rivets. Sharpen or replace as needed.
- Inspect Guide Bar: Check for burrs or wear.
دوره ساتنه
- Sharpen Chain: A sharp chain cuts efficiently and safely. Use a round file of the correct size for your chain.
- د هوا فلټر پاک کړئ: (If applicable, though battery models often have less complex filters) Refer to the specific instructions for your model.
- Check Battery and Charger: Ensure they are free from damage and functioning correctly.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Chainsaw پیل نه کوي | Battery not charged; Battery not inserted correctly; Power button off; Chain brake engaged. | Charge battery; Reinsert battery; Press power button; Disengage chain brake. |
| زنځیر په مؤثره توګه نه پرې کیږي | Dull chain; Incorrect chain tension; Low bar oil. | Sharpen or replace chain; Adjust chain tension; Refill bar oil. |
| زنځیر ډیر ګرموي | Overuse; Dull chain; Insufficient lubrication. | Allow to cool; Sharpen chain; Check bar oil level and flow. |
مشخصات
- ماډل: DCS-2500-12C1
- برانډ: Echo
- د بار اوږدوالی: 12 انچه
- د بیټرۍ سیسټم: ECHO eFORCE 56V
- د بیټرۍ ظرفیت: 2.5ه
- د موټرو ډول: بې برش
- د توکي وزن: 1 اونس
- د محصول ابعاد: 14"L x 14"W x 14"H
- هارس پاور: 5.3 hp
- د لومړي شتون نیټه: د ۲۰۲۳ کال د می ۹ مه
تضمین او ملاتړ
For warranty information and technical support, please refer to the official Echo product registration or contact Echo customer service directly. Keep your purchase receipt for warranty claims.
