XPOtool Pool Pump with Variable Speed

1. محصول ختم شوview

The XPOtool Pool Pump is designed to significantly improve the water quality of swimming pools and whirlpools. It boasts a powerful circulation capacity of up to 560 liters per minute, equating to 33,600 liters per hour, ensuring continuous water purification. The pump is installed directly before the filter tank, drawing water into the filtration system and returning it clean to the pool, thereby preventing algae growth and germ accumulation. This model features a maximum delivery head of 18 meters and operates quietly.

A key feature of this 1500 W pool pump is its variable speed capability, adjustable in three stages between 600 and 3000 revolutions per minute. This allows for energy-efficient operation at lower speeds, saving electricity, while also providing full power when higher performance is required. The variable speed also enables individual adaptation to different connected devices that may not require high RPM. The pump's motor is equipped with practical overheating protection for enhanced safety.

For optimal pump performance, it is recommended that the entire volume of the swimming pool is circulated twice daily. An operating duration of approximately 8 hours is a good guideline. For example, a 40 m³ pool would require a daily circulation of 80 m³, which translates to a filter system capable of pumping at least 10 m³/h (167 l/min) over an 8-hour period.

2. د خوندیتوب لارښوونې

• بریښنایی خوندیتوب: Always disconnect the pump from the power supply before performing any installation, maintenance, or cleaning. Ensure the power outlet is properly grounded and protected by a Residual Current Device (RCD). Do not operate the pump with damaged cables or plugs.
• Water and Electrical Components: Never immerse the motor or electrical components in water. Ensure all connections are watertight and protected from splashes.
• لګول: Install the pump on a stable, level surface in a well-ventilated area, protected from direct sunlight and adverse weather conditions. Ensure adequate space around the pump for air circulation and maintenance.
• د ډیر تودوخې محافظت: The pump is equipped with an overheating protection system. If the pump stops unexpectedly, allow it to cool down before attempting to restart. Investigate the cause of overheating (e.g., blocked intake, insufficient water flow).
• کیمیاوي مطابقت: This pump is designed for standard pool water. Note: This pump may not be compatible with salt water pool systems. Consult with a professional if you have a salt water pool.
• ماشومان او څاروي: د کار کولو پرمهال ماشومان او څاروي له پمپ څخه لرې وساتئ.
• مسلکي نصب کول: For complex installations or if you are unsure, it is recommended to consult a qualified electrician or pool technician.

3. د بسته محتويات

مهرباني وکړئ د لاندې توکو لپاره په بسته کې وګورئ:

• XPOtool Pool Pump Unit (Model 63910)
• د کارونکي لارښود (دا لاسوند)
• Necessary connection fittings (may vary, refer to packaging)

4. ترتیب کول

د پمپ د فعالیت او اوږد عمر لپاره سم نصب کول خورا مهم دي. دا ګامونه په دقت سره تعقیب کړئ:

1. ځای په ځای کول: Position the pump on a firm, level surface as close to the pool as possible, but ensuring it is protected from direct weather exposure. The pump should be installed below the water level of the pool for optimal self-priming, or as per specific system requirements.
2. پورته کول: Secure the pump to prevent vibration and movement during operation. Use appropriate fasteners if mounting to a base.
3. د نلدوانۍ اړیکې: Connect the pump's inlet to the pool's skimmer/main drain line and the outlet to the filter system. Ensure all connections are sealed tightly to prevent leaks and air intake. The pump is designed to be mounted immediately before the filter tank. The connections are Ø 65 mm (G 2½") AG.
4. بریښنایی پیوستون: Connect the pump to a dedicated, properly grounded electrical outlet with RCD protection. Ensure the voltage matches the pump's requirements (230V).
5. پریمنګ: Before first use, ensure the pump is properly primed. Fill the pump housing with water through the clear lid until it is full. Replace the lid securely.

شکل 4.1: اصلي view of the XPOtool Pool Pump. Shows the black pump unit with its motor, clear lid for the pre-filter basket, and white connection ports.

Figure 4.2: Dimensional drawing of the XPOtool Pool Pump, showing side and front views with measurements in millimeters, including connection sizes.

5. عملیاتي لارښوونې

The XPOtool Pool Pump features a variable speed control for optimized performance and energy efficiency.

1. پاور آن/بند: Connect the pump to the power supply. Use the integrated control panel or external timer (if installed) to turn the pump on or off.
2. د متغیر سرعت تعدیل: The pump offers three speed settings, ranging from 600 to 3000 RPM.
   • Low Speed (e.g., 600-1500 RPM): Ideal for continuous filtration, maintaining water quality, and energy saving. This setting is suitable for general circulation and when less power is needed.
   • Medium Speed (e.g., 1500-2500 RPM): Suitable for regular daily operation, balancing efficiency and performance.
   • High Speed (e.g., 2500-3000 RPM): Use for backwashing the filter, vacuuming the pool, or when rapid water circulation is required. This setting provides the maximum flow rate of 33,600 liters per hour.
   Refer to the pump's control panel for specific speed selection buttons or dials.
3. د څارنې فعالیت: Regularly check the pressure gauge on your filter (if applicable) to ensure proper flow. A significant drop in flow or increase in pressure may indicate a clogged filter or pump issue.

Figure 5.1: Performance curve graph for XPOtool pool pumps, showing Head (m) vs. Flow (L/min) at 3450 r/min. The curve for Art. 63910 (HPP1500) indicates its flow characteristics.

6. ساتنه

Regular maintenance ensures the longevity and efficient operation of your XPOtool Pool Pump.

• Pre-Filter Basket Cleaning: The pump is equipped with a pre-filter basket to catch large debris. Regularly inspect and clean this basket.
  1. پمپ وتړئ او له بریښنا څخه یې وصل کړئ.
  2. Unscrew the clear lid on top of the pump housing.
  3. Remove the basket and empty any debris. Rinse the basket thoroughly with water.
  4. Inspect the O-ring on the lid for damage and ensure it is clean.
  5. Replace the basket and securely screw the lid back on, ensuring a tight seal.
• د موټرو وینټیلیشن: Ensure the motor's cooling fins and fan are free from dust and debris to prevent overheating. Do not block the ventilation openings.
• د لیک تفتیش: Periodically check all plumbing connections for leaks. Tighten connections as needed.
• ژمی کول: In regions with freezing temperatures, the pump must be properly winterized to prevent damage.
  • ټولې اوبه د پمپ او نل لیکو څخه وباسئ.
  • پمپ په وچ او یخ وهلو پاک ځای کې وساتئ.
  • Consider using a pool winterizing kit or consulting a pool professional.

شکل 6.1: مخکی view of the pump showing the clear lid of the pre-filter basket, which allows for easy inspection of debris accumulation.

6.2 شکل: تړل view of the pump's inlet, showing the internal strainer which is part of the pre-filter system.

7. ستونزه حل کول

If you encounter issues with your XPOtool Pool Pump, refer to the following common problems and solutions:

که چیرې د دې حل لارو هڅه کولو وروسته هم ستونزه دوام ومومي، مهرباني وکړئ د پیرودونکو ملاتړ سره اړیکه ونیسئ.

8. مشخصات

9. تضمین او ملاتړ

XPOtool products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official XPOtool website. In case of technical issues, questions about operation, or warranty claims, please contact the seller or manufacturer directly.

Seller: Wiltec Wildanger Technik GmbH

For further assistance, please visit the XPOtool store on Amazon or contact their customer service.