PAC L.O.C. Pro Advanced Audio Integration T-Harness

1. پیژندنه

The PAC L.O.C. Pro Advanced Audio Integration T-Harness (Model LPHGM51) is designed to simplify the integration of aftermarket audio equipment with your vehicle's factory radio system. This vehicle-specific T-harness provides all necessary high-level inputs and speaker outputs, allowing for the addition of aftermarket amplifiers or signal processors while retaining the original factory radio.

مهمه یادونه: This product is specifically designed for OEM non-amplified systems and is not for use in vehicles with a factory ampلايف.

2. مطابقت

The LPHGM51 T-Harness is compatible with select 2018 to 2023 non-amplified GM vehicles. Please verify your vehicle's compatibility before installation.

Compatible Vehicles (All Trim Levels, Non-Amplified Systems):

• بویک: Envision 2017, LaCrosse 2016, Regal 2014-2015
• Cadillac: ATS 2015-2016, CTS 2014-2015, Escalade 2015, SRX 2015-2016, XT5 2017
• شیورلیټ: Camaro 2016-2018 (with 8-in. screen IO5/IO6), Colorado 2015-2016, Cruze 2016-2017, Impala Non-Classic 2014-2016 (with 8-in. screen IO5/IO6), Impala 2017-2019 (with 8-in. screen IO5/IO6), Malibu Non-Classic 2016, Malibu 2017-2018, Silverado 2014-2017, Silverado 2018 (with 8-in. screen IO5/IO6), Silverado Classic 2019 (with 8-in. screen IO5/IO6), Silverado HD 2015-2019, Sonic 2017, Spark 2015 and 2018

3. ترتیب او نصب کول

۲.۱ په بکس کې څه دي

• PAC L.O.C. Pro Advanced Audio Integration T-Harness (LPHGM51)
• د کارن لارښود

۳.۱ د نصبولو دمخه غورونه

• لومړی خوندیتوب: Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent short circuits and damage.
• د مسلکي نصب کولو وړاندیز شوی: If you are not familiar with car audio wiring and vehicle disassembly, professional installation is highly recommended.
• اړین وسایل: Basic tools such as wire strippers, crimpers, electrical tape, zip ties, and a panel removal tool may be necessary.
• فابریکه Ampد ژوندي پاتې کیدو چک: Confirm your vehicle does نه have a factory-installed amplifier. This harness is incompatible with ampژوندی سیسټمونه

3.3 د نصبولو مرحلې

1. د فابریکې راډیو ته لاسرسی: Carefully remove the necessary trim panels and components to gain access to the back of your vehicle's factory radio. Refer to your vehicle's service manual for specific instructions.
2. Disconnect Factory Harness: Locate and disconnect the main wiring harness from the back of the factory radio.
3. د ټي هارنس سره وصل کړئ: Connect the male end of the LPHGM51 T-Harness to the factory radio. Then, connect the female end of the LPHGM51 T-Harness to the vehicle's factory wiring harness that was just disconnected.
4. Wire Aftermarket Equipment: The T-harness provides labeled wires for high-level audio outputs (e.g., front left speaker +, front left speaker -, etc.). Connect these wires to the corresponding inputs on your aftermarket amplifier or signal processor. Ensure all connections are secure and properly insulated.
5. خوندي تارونه: Route and secure all wiring to prevent pinching, chafing, or interference. Use zip ties to keep cables tidy.
6. د ازموینې سیسټم: Before reassembling the dashboard, reconnect the vehicle's negative battery terminal and test the audio system to ensure proper functionality of both the factory radio and aftermarket components.
7. بیا یوځای کول: Once confirmed working, carefully reassemble all removed trim panels and components.

شکل 1: پایview of the PAC L.O.C. Pro Advanced Audio Integration T-Harness, showing the main connectors and individual speaker wire outputs.

شکل ۴.۵: یو نږدې view of the PAC L.O.C. Pro T-Harness, illustrating the connection points for factory and aftermarket wiring.

4. د سیسټم چلول

Once the PAC L.O.C. Pro Advanced Audio Integration T-Harness is correctly installed, its operation is seamless and integrated with your vehicle's existing audio system. The harness functions as an intermediary, providing high-level audio signals from your factory radio to your aftermarket audio components without altering the factory radio's functionality.

• Your factory radio will operate as normal, controlling volume, source selection, and tone.
• The audio signals are passed through the T-harness to your aftermarket amplifier or signal processor, which then processes and amplifies the sound for your aftermarket speakers.
• Adjustments to sound quality (e.g., bass, treble, balance, fader) will primarily be managed through your factory radio, while specific amplifier settings (gain, crossover) will be managed on the aftermarket equipment.

5. ساتنه

The PAC L.O.C. Pro Advanced Audio Integration T-Harness is designed for durable, long-term, and maintenance-free operation. No routine maintenance is required for the harness itself.

• د اتصال بشپړتیا: Ensure all connections made during installation remain secure and free from moisture or physical damage. Loose connections can lead to intermittent audio or signal loss.
• د تارونو معاینه: If you experience any audio issues, a visual inspection of the wiring for signs of wear, fraying, or damage is recommended.
• د چاپیریال ساتنه: Keep the harness and connected components away from excessive heat, moisture, and corrosive substances.

6. ستونزه حل کول

If you encounter issues after installing the LPHGM51 T-Harness, refer to the following troubleshooting guide:

6.1 No Audio Output from Aftermarket System

• اړیکې چیک کړئ: Verify that all connections between the T-harness, factory radio, vehicle harness, and aftermarket equipment are secure and correctly seated.
• Aftermarket Equipment Power: Ensure your aftermarket amplifier or signal processor is receiving power and is turned on. Check its power, ground, and remote turn-on connections.
• فابریکه Ampژوندی: Double-check that your vehicle does not have a factory amplifier. This harness is not compatible with ampژوندی سیسټمونه
• د سرچینې انتخاب: Confirm the factory radio is set to an active audio source (e.g., radio, media player).

6.2 Distorted or Poor Audio Quality

• د ګټې ترتیبات: Adjust the gain settings on your aftermarket amplifier. Incorrect gain settings can lead to distortion.
• د تارونو بشپړتیا: Inspect all audio signal wires for shorts, breaks, or poor insulation. Ensure they are not running too close to power wires, which can cause interference.
• ځمکني کول: Verify that the ground connection for your aftermarket equipment is solid and free of corrosion.

6.3 Intermittent Audio

• تړلې اړیکې: Re-check all harness and wiring connections for any looseness.
• Damaged Wiring: Inspect wiring for any signs of damage or intermittent contact.

7. مشخصات

8. د تضمین معلومات

Specific warranty details for the PAC L.O.C. Pro Advanced Audio Integration T-Harness (LPHGM51) are not provided in this manual. For comprehensive warranty information, including terms, conditions, and duration, please refer to the official PAC Audio webسایټ یا د محصول بسته بندي.

9. د پیرودونکي ملاتړ

For technical assistance, installation questions, or any other inquiries regarding your PAC L.O.C. Pro Advanced Audio Integration T-Harness, please contact PAC Audio customer support directly. You can typically find contact information and support resources on the official PAC Audio webسایټ

Webسایټ: https://pac-audio.com/ (Please check for the most current URL)