1. پیژندنه
This manual provides comprehensive instructions for the installation, operation, and maintenance of your 24VDC Highest Density 5-in-1 5050 RGBWW LED Strip. This 16.4ft (5m) LED strip is designed to produce thousands of vivid colors and tunable white light (Warm White to Daylight), making it ideal for various indoor lighting applications.
Image: The 16.4ft (5m) 5-in-1 RGBWW LED strip, coiled for packaging, showcasing its compact design and multi-color capabilities.
2. د خوندیتوب معلومات
مهرباني وکړئ د نصبولو او کارولو دمخه د خوندیتوب ټولې لارښوونې په دقت سره ولولئ. د دې لارښوونو په تعقیب کې پاتې راتلل ممکن د بریښنا شاک، اور، یا نورو خطرونو پایله ولري.
- ډاډ ترلاسه کړئ چې د هر ډول نصب یا ساتنې دمخه د بریښنا رسولو قطع شوی دی.
- Use only a 24VDC power supply compatible with the strip's wattage requirements (minimum 150W for 16.4ft).
- This product is rated IP20 and is غیر پنروک. It is intended for indoor use only. Avoid exposure to moisture or high humidity.
- Do not bend the LED strip excessively. Avoid bending more than 2 inches at any point to prevent damage to the PCB or LEDs.
- Do not connect the LED strip directly to AC power.
- د ماشومانو د لاسرسي څخه لرې وساتئ.
3. د بسته محتويات
ډاډ ترلاسه کړئ چې لاندې ټول توکي ستاسو په بسته کې شامل دي:
- 1x 16.4Ft (5m) 5-in-1 RGBWW LED Strip
- 1x Board-to-Board LED Connector
- 1x Board-to-Wire LED Connector
4. ترتیب او نصب کول
۳.۱. د نصبولو دمخه چکونه
Before permanent installation, unroll the LED strip and connect it to a compatible 24VDC power supply and an RGBWW/RGBCCT controller (sold separately) to test its functionality. Ensure all LEDs illuminate correctly and respond to color and dimming commands.
4.2. Cutting the LED Strip
The LED strip can be cut to your desired length. Each cutting point is marked every 7 LEDs (62.5mm / 2.46 inches). Always cut along the designated center line to avoid damaging the PCB.
Image: Detailed diagram illustrating the 12mm (0.47in) width, 62.5mm (2.46in) cutting distance, and the 5-in-1 RGBCC LED chip structure. It also shows the flexible nature of the strip, strong adhesive backing, and the 6-pin wire connector.
4.3. Connecting the LED Strip
This LED strip requires a 24VDC power supply and an RGBWW/RGBCCT controller for operation. These components are not included and must be purchased separately.
Image: A wiring diagram showing how to connect the RGBCC LED strip to an RGBCC controller and a 24VDC constant voltage power supply. It also depicts a remote control for the system.
Use the included connectors for easy installation without soldering:
- Board-to-Board Connector: Used to connect two cut sections of the LED strip directly.
- Board-to-Wire Connector: Used to connect a cut section of the LED strip to wires, typically for connecting to a controller or power supply.
Image: Visual representation of the board-to-board connector and the board-to-wire connector, demonstrating their use for connecting LED strip segments without soldering.
۵.۴. د LED پټې نصب کول
The LED strip features an adhesive backing for easy mounting on clean, dry, and smooth surfaces. Peel off the protective layer and firmly press the strip onto the desired location. Ensure the surface is free of dust, grease, or moisture for optimal adhesion.
5. عملیاتي لارښوونې
Once properly installed and connected to a compatible RGBWW/RGBCCT controller, you can control the LED strip's functions.
5.1. Color Control (RGB+CCT)
The 5-in-1 design allows for a wide spectrum of colors and tunable white light:
- د RGB رنګونه: Access thousands of vibrant colors for atmospheric and entertainment lighting.
- د ټون ایبل سپین (CCT): Adjust the white light from Warm White (approx. 2800K) to Daylight (approx. 6500K) to suit different moods and tasks.
Image: The LED strip showcasing its ability to produce different color temperatures of white light (6000K, 3000K) and primary RGB colors (Red, Green, Blue).
Image: The LED strip demonstrating additional color options, including 4000K white, yellow, pink, purple, and ice blue, highlighting its versatility.
5.2. کموالی
The LED strip is fully dimmable. Use your compatible RGBWW/RGBCCT controller to adjust the brightness level to your preference.
6. ساتنه
The LED strip requires minimal maintenance. To ensure longevity and optimal performance:
- پاکول: Gently wipe the strip with a dry, soft cloth to remove dust. Do not use liquid cleaners or abrasive materials.
- معاینه: Periodically check the connections and the strip for any signs of damage or wear.
- چاپیریال: Ensure the strip remains in a dry, indoor environment, away from direct heat sources or extreme temperatures.
7. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| د LED پټه نه روښانه کیږي. | No power, incorrect wiring, faulty power supply/controller. | Check all connections. Ensure 24VDC power supply is connected and functioning. Verify controller is powered and correctly wired. |
| Some LEDs or sections do not light up. | Damaged section, poor connection at cut point, pin de-tinning. | Inspect the affected section for physical damage. Re-check connections at cut points. If a unit is damaged due to pin de-tinning, use the provided board-to-board connector to replace the damaged unit by cutting along the center line. |
| Colors are incorrect or not changing. | Incorrect controller type, faulty controller, wiring issue. | Ensure you are using an RGBWW/RGBCCT compatible controller. Check wiring to ensure correct color channels are connected. |
| څراغونه څراغونه. | Insufficient power supply, loose connection, faulty strip section. | د بریښنا رسولو واټ تایید کړئtage meets or exceeds the strip's requirements (130W for 16.4ft, recommend 150W+). Check all connections for looseness. If problem persists, isolate the flickering section. |
| چپکونکی نه چپکیږي. | Surface not clean/dry, unsuitable surface material. | Ensure mounting surface is thoroughly cleaned and dry before application. For porous or uneven surfaces, consider using additional mounting clips or stronger adhesive tape. |
8. مشخصات
| فیچر | تفصیل |
|---|---|
| د توکو ډول | 5-In-1 Higher Density RGBWW LED Strip |
| د LED چپ | Epistar Chip (SMD5050 5-IN-1 LED chip) |
| د کار د حرارت درجه | -4°F (-20°C) ~ 122°F (50°C) |
| د ذخیرې د حرارت درجه | -40°F (-40°C) ~ 176°F (80°C) |
| رڼا رنګ | RGB+CCT (2800K-6500K color temperature) |
| ابعاد | 16.4ft/roll (5m/roll) |
| Cuttable Unit | Every 7 LEDs (62.5mm / 2.46in) |
| د LED مقدار | 112 LEDs per meter, 560 LEDs per roll |
| ننوتۍ جلدtage | 24VDC |
| د پټې پلنوالی | 12 ملي متر (0.47in) |
| کاري ځواک | 26W/m, 130W /16.4ft Max |
| Lamp روښانه فلکس | 780 Lumen/Ft |
| PCB | 4Moz |
| د بیم نمونه | 120 درجې |
| د پنروک درجه | Non-waterproof IP20 (For Indoor Decor) |
| CRI | ۴۲+ |
| د ژوند موده | 50,000+ ساعته |
9. تضمین او ملاتړ
For warranty information and technical support, please contact SuperlightingLED customer service through the platform where you purchased the product. Please have your order number and product model (FSLRGBWW-24V-5050-560X12) ready for faster assistance.
Additional resources for compatible controllers and power supplies can be found at:
