Monport 80mm Rotary Axis Attachment Instruction Manual

1. محصول ختم شوview

The Monport 80mm Rotary Axis Attachment is designed to enhance the capabilities of your fiber laser engraver, allowing for precise marking and engraving on cylindrical and irregularly shaped objects. This attachment is ideal for small-batch work on various materials including metals, wood, glass, acrylic, and hard plastics.

کلیدي ځانګړتیاوې:

• Highly Adaptable: Built for small-batch marking and engraving on metals, wood, glass, acrylic, and hard plastics. Accommodates a wide range of complex and irregular shaped objects.
• د نصبولو لپاره اسانه: Set up the proper angle and length ranges with your software interface. Draws power directly from your laser engraver, requiring only one cable for quick setup.
• No Positioning Joints Required: Calculate the path once and process your design without repeatedly rotating the object. Paths can be layered when reducing the machine allowance, perfect for roughing and other special finishes.
• Stable and Accurate: Compact ball screw and linear guide pair transmission provide high efficiency, stability, and precision. The chuck fits objects up to 80mm in diameter. Constructed with steel and aluminum for durability.

شکل 1: Monport 80mm Rotary Axis Attachment, showing the main unit with its 3-jaw chuck and included accessories like additional jaws and a chuck wrench.

2. ترتیب او نصب کول

Follow these steps to properly set up and install your Monport 80mm Rotary Axis Attachment with your fiber laser engraver.

1. ځای په ځای کول: Position the rotary axis attachment securely on the work surface of your fiber laser engraver. Ensure it is stable and aligned with the laser path.
2. پیوستون: Locate the dedicated rotary axis port on your fiber laser engraver. Connect the provided cable from the rotary axis attachment to this port. Ensure the connection is firm.
3. د سافټویر ترتیب: Refer to your laser engraver's software manual for specific instructions on enabling and configuring the rotary axis. You will typically need to input parameters such as the object's diameter and the desired engraving angle.
4. Object Mounting: Open the chuck jaws using the provided wrench. Carefully place the cylindrical object (e.g., cup, ring) into the chuck, ensuring it is centered and held firmly. Tighten the jaws evenly to secure the object without overtightening.

3. عملیاتي لارښوونې

Once the rotary axis is installed and configured, you can begin engraving cylindrical objects.

1. د ډیزاین چمتووالی: Create or import your design in your laser engraver's software. Ensure the design is scaled appropriately for the circumference and length of your object.
2. د پیرامیټر ترتیبات: Adjust laser power, speed, frequency, and other engraving parameters according to the material being engraved. For rotary engraving, ensure the software's rotary function is enabled and correctly calibrated.
3. د تمرکز سمون: Adjust the laser focus to the surface of the object mounted in the rotary chuck. This is crucial for achieving clear and precise engraving results.
4. Test Engraving: Before final engraving, perform a low-power test on a similar scrap material or an inconspicuous area of the object to verify settings and alignment.
5. نقاشي پیل کړئ: Initiate the engraving process from your software. Monitor the process to ensure proper operation and safety.

شکل 2: مختلف views of the Monport 80mm Rotary Axis Attachment, illustrating its robust construction and the adjustable chuck mechanism for securing different object sizes.

4. ساتنه

Regular maintenance ensures the longevity and optimal performance of your rotary axis attachment.

• پاکول: Periodically clean the chuck jaws and the body of the rotary axis to remove dust, debris, and material residue. Use a soft, dry cloth. For stubborn residue, a mild cleaning solution can be applied to the metal parts, avoiding electrical components.
• غوړول: Inspect moving parts, such as the chuck mechanism and any visible gears or bearings, for smooth operation. Apply a small amount of appropriate lubricant if necessary, following general guidelines for precision mechanical components.
• معاینه: Regularly check all screws and fasteners to ensure they are tight. Inspect the cable for any signs of wear or damage. Replace any damaged components immediately.
• ذخیره کول: When not in use, store the rotary axis attachment in a clean, dry environment, protected from dust and extreme temperatures.

5. ستونزه حل کول

This section addresses common issues you might encounter with your rotary axis attachment.

• Rotary Axis Not Responding:
  • Check if the cable is securely connected to both the rotary axis and the laser engraver's port.
  • Verify that the rotary axis function is enabled in your laser engraver's software.
  • Ensure the laser engraver itself is powered on and functioning correctly.
• Inaccurate Engraving/Skipping:
  • Confirm that the object is securely mounted in the chuck and not slipping.
  • Check the software settings for correct object diameter and rotary calibration.
  • Inspect the rotary axis for any obstructions or debris that might impede smooth rotation.
  • Ensure the laser focus is correctly set on the object's surface.
• غیر معمولي غږونه:
  • Turn off the laser engraver and inspect the rotary axis for any loose parts or foreign objects.
  • د حرکت کوونکو برخو مناسب غوړوالی وګورئ.

If you encounter issues not covered here, or if troubleshooting steps do not resolve the problem, please contact Monport customer support.

6. تخنیکي مشخصات

شکل 3: ابعادي اوورview of the Monport 80mm Rotary Axis Attachment, indicating key measurements for integration and planning.

۷. تضمین او د پیرودونکو ملاتړ

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Monport website. If you require technical assistance, have questions about operation, or need to report a defect, please contact Monport customer support through their official channels. Provide your product model number (MP Rotary Axis) and purchase details for efficient service.