1. محصول ختم شوview
The OSRAM Base Classic A FIL 40 LED Bulb is a modern, energy-efficient lighting solution designed for general illumination in household and interior applications. This LED bulb provides a warm white light (2700 Kelvin) with a brightness of 470 lumens, equivalent to a traditional 40-watt incandescent bulb, while consuming only 4 watts of power. It features an E27 screw base for easy installation and a long operational life of up to 10,000 hours.
کلیدي ځانګړتیاوې عبارت دي له:
- Pleasant Light: Delivers good light quality and instant 100% light without warm-up time.
- قوي ډیزاین: Resistant to shocks and vibrations due to advanced LED technology.
- اوږد خدمت ژوند: Offers an extended operational life of up to 10,000 hours.
- د انرژي سپما: Very low energy consumption, making it highly efficient.
- تر ټولو غوره تودوخه: Generates lower heat compared to standard incandescent bulbs.
Figure 1: OSRAM Base Classic A FIL 40 LED Bulb, showcasing its classic shape and E27 base.
2. د خوندیتوب معلومات
- بریښنایی خوندیتوب: Always ensure the power supply is switched off before installing, removing, or cleaning the bulb to prevent electric shock.
- والیtage مطابقت: This bulb is designed for 220-240 Volts. Ensure your fixture's voltage د دې اړتیا سره سمون خوري.
- د ډیمر مطابقت: دا محصول دی not suitable for use with dimmers. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
- د کور دننه کارول: Primarily for indoor use. If used outdoors, it must be installed in a suitable, enclosed outdoor fixture to protect it from elements.
- د تودوخې تولید: While LED bulbs generate less heat than incandescent bulbs, they still produce some heat. Ensure adequate ventilation around the bulb.
- تخریب: Dispose of used bulbs according to local regulations for electronic waste. Do not dispose of with general household waste.
3. ترتیب او نصب کول
Follow these steps to safely install your OSRAM LED bulb:
- بندول: Before beginning, ensure the power supply to the light fixture is completely switched off at the main switch or circuit breaker.
- زوړ بلب لرې کړئ: If replacing an existing bulb, allow it to cool down completely before carefully unscrewing it counter-clockwise from the E27 socket.
- ساکټ معاینه کړئ: Check the E27 socket for any damage or debris. Ensure it is clean and dry.
- نوی بلب نصب کړئ: Gently screw the OSRAM LED bulb clockwise into the E27 socket until it is finger-tight. Do not overtighten.
- د بریښنا بیرته راګرځول: کله چې بلب په خوندي ډول نصب شي، د رڼا فکسچر ته بریښنا بیرته ورکړئ.
- ازموینه: د رڼا سویچ چالان کړئ ترڅو ډاډ ترلاسه کړئ چې بلب په سمه توګه کار کوي.
Figure 2: Close-up of the OSRAM LED bulb, highlighting the E27 screw base for installation.
4. عملیات
Operating the OSRAM Base Classic A FIL 40 LED Bulb is straightforward:
- سویچ آن/بند: د بلب د فعالولو یا بندولو لپاره د خپل څراغ سره وصل معیاري دیوال سویچ وکاروئ.
- فوري رڼا: The LED bulb provides instant 100% light output immediately upon switching on, with no warm-up time required.
- غیر منحل کیدونکی: As noted in the safety section, this bulb is not dimmable. It will operate at full brightness when switched on.
5. ساتنه
The OSRAM LED bulb requires minimal maintenance:
- پاکول: د پاکولو دمخه ډاډ ترلاسه کړئ چې بریښنا بنده ده او بلب یخ دی. بلب په نرمۍ سره د نرم او وچ ټوکر سره پاک کړئ. مایع پاکوونکي یا د کثافاتو موادو څخه کار مه اخلئ.
- بدلول: د اوږد عمر له امله، د بار بار بدلولو تمه نه کیږي. کله چې بدلول اړین وي، د نصبولو مرحلې په څلورمه برخه کې تعقیب کړئ.
- د کارونکي د خدمت وړ برخې نشته: The bulb contains no user-serviceable parts. Do not attempt to open or repair the bulb.
6. ستونزه حل کول
If you encounter issues with your OSRAM LED bulb, refer to the following common troubleshooting steps:
- بلب نه روښانه کیږي:
- ډاډ ترلاسه کړئ چې فکسچر ته بریښنا رسول روانه ده.
- Check that the bulb is screwed in securely into the E27 socket.
- Test the bulb in another working fixture to rule out a faulty fixture.
- If the bulb still does not light up, it may be faulty and require replacement.
- ټوخی کول یا کمیدل:
- Confirm that the bulb is not connected to a dimmer switch, as this bulb is not dimmable.
- په فکسچر یا تارونو کې د خلاصو اړیکو لپاره وګورئ.
- د حجم ډاډ ترلاسه کړئtage supply is stable and within the bulb's specified range (220-240V).
- غیر معمولي شور:
- LED bulbs are generally silent. If you hear buzzing, ensure the bulb is not on a dimmer circuit.
- په فکسچر کې د خلاصو اړیکو لپاره وګورئ.
7. مشخصات
| فیچر | مشخصات |
|---|---|
| برانډ | OSRAM |
| د ماډل شمیره | BASECLA40 4W/827 230V FIL E27 FS2 |
| د رڼا ډول | LED |
| واټtage | 4 واټ |
| د انډیشینټ مساوي | 40 واټ |
| د بلب اساس | E27 |
| روښانتیا | 470 Lumens |
| د رنګ د حرارت درجه | 2700 کیلوین (ګرم سپین) |
| د رنګ رینډینګ انډیکس (CRI) | ≥ 80 |
| والیtage | 220-240 وولټونه |
| اوسط ژوند | 10,000 ساعته |
| dimmable | نه |
| د کور دننه / بهر کارول | Indoor (Outdoor in suitable fixtures) |
| مواد | شیشه |
| د محصول ابعاد | ۱۷" څراغ x ۱۷" ح |
Figure 3: Technical drawing illustrating the dimensions of the OSRAM LED bulb. The 'd' indicates diameter and the vertical line indicates height.
Figure 4: EU Energy Label for the LEDVANCE AC32396 (OSRAM) LED bulb, indicating an energy efficiency class of E and consumption of 4 kWh/1000h. For more details, visit the official EPREL database: د EPREL ډیټابیس لینک.
8. تضمین او ملاتړ
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official OSRAM webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
