Thermalright TL-S12 120mm ARGB PWM Case Fan User Manual

1. پیژندنه

The Thermalright TL-S12 is a high-performance 120mm case fan designed for efficient PC cooling. It features automatic speed control via a 4-pin PWM connector, allowing the fan speed to adjust based on motherboard temperature, with a maximum speed of 1500 RPM. The fan is equipped with durable S-FDB (Fluid Dynamic Bearings) for quiet operation and extended lifespan. Its dual-sided ARGB lighting provides customizable aesthetic effects, synchronizing with compatible systems.

The Thermalright TL-S12 fan features a 120mm frame with ARGB lighting and a central Thermalright logo.

۲. په بکس کې څه دي؟

• 1x Thermalright TL-S12 120mm ARGB PWM Case Fan

3. مشخصات

The fan's 7-blade airflow design ensures efficient cooling performance.

This image illustrates the fan's 7-blade airflow design, rated at 47.6 CFM at 1500 RPM, and its 4-pin PWM connector for automatic speed control.

4. ترتیب او نصب کول

Proper installation ensures optimal cooling performance and longevity of your fan. Refer to the video guide below for a visual walkthrough.

د نصبولو مرحلې:

1. د هوا د جریان لار مشخص کړئ: Observe the fan's design. The side with the fan blades visible (without the frame's structural supports) typically indicates the direction of airflow دننه the fan (intake). The side with the frame's structural supports indicates airflow بهر of the fan (exhaust). For standard fans, the fan blade pushes air in, and the fan frame pushes air out. For reverse airflow fans (e.g., TL-C12R, TL-C12R-S, TL-C12RW-S), the airflow direction is reversed.
2. د نصبولو چمتو کول: For case fan mounting, use the provided vibration-free mounts. Insert one end of the mount through the fan mounting hole on your PC case.
3. خوندي غرونه: Pull the end of the vibration-free mount through the case hole until it is securely fastened. Repeat for all four mounting points.
4. فین نصب کړئ: Align the fan with the secured vibration-free mounts on the case.
5. Finalize Mount: Continue to pull the remaining end of each vibration-free mount through the fan's mounting holes to secure the fan firmly in place.
6. Alternative Mounting (Screws): If using screws for mounting, align the fan with the desired mounting location on your PC case.
7. د پیچونو سره خوندي کړئ: Use a screwdriver to fasten the screws through the fan's mounting holes and into the case. Ensure all four screws are tightened evenly to prevent vibration.
8. بریښنا وصل کړئ: د فین د ۴ پنونو PWM کیبل ستاسو په مدر بورډ کې موجود ۴ پنونو فین سرلیک سره وصل کړئ. ډاډ ترلاسه کړئ چې نښلونکی په بشپړ ډول ځای پر ځای شوی دی.
9. Connect ARGB (if applicable): Connect the fan's ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard or ARGB controller.

The TL-S12 fan is versatile, suitable for use as a case fan, with air coolers, or on water cooling radiators to enhance system cooling.

5. عملیاتي لارښوونې

Once installed and connected, the Thermalright TL-S12 fan operates automatically:

• د PWM کنټرول: The 4-pin PWM connection allows your motherboard to automatically control the fan speed based on system temperature. This ensures optimal cooling performance when needed and quieter operation during lighter loads.
• د ARGB رڼا: The integrated ARGB lighting will illuminate upon system power-on. If connected to a compatible motherboard or controller, you can customize lighting effects and synchronization through your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

The fan features seamless dual-sided ARGB ring lighting, adding aesthetic appeal to your PC build.

6. ساتنه

The Thermalright TL-S12 fan is designed for low maintenance due to its S-FDB bearing. However, regular cleaning is recommended to ensure optimal performance.

• پاکول: Periodically clean dust accumulation from the fan blades and frame using compressed air or a soft brush. Ensure the system is powered off before cleaning.
• بیرغ: The S-FDB bearing is maintenance-free. Do not attempt to disassemble the fan, as this may damage the bearing and void any potential warranty.
• Vibration Pads: Ensure the silicone rubber pads on the fan corners are intact to minimize vibration and noise.

The fan incorporates soft-touch silicone rubber pads for vibration absorption and a durable S-FDB (Fluid Dynamic Bearing) for stable, low-noise operation.

Equipped with a high-durability S-FDB (Fluid Dynamic Bearing), the fan motor ensures low-friction, low-noise operation and a long service life.

7. ستونزه حل کول

If you encounter issues with your Thermalright TL-S12 fan, refer to the following common troubleshooting steps:

• پنکه نه ګرځېږي:
  • ډاډ ترلاسه کړئ چې د 4-پن PWM نښلونکی په خوندي ډول د مدر بورډ فین سرلیک سره وصل شوی دی.
  • Check your motherboard's BIOS/UEFI settings to ensure the fan header is enabled and configured correctly (e.g., not set to 'disabled' or a very low RPM profile).
  • Test the fan on a different fan header or with a fan tester if available, to rule out a faulty fan header.
• د ARGB رڼا نشته:
  • Verify the ARGB cable is correctly connected to a 3-pin 5V ARGB header on your motherboard or controller. Do not connect to a 4-pin 12V RGB header, as this can damage the LEDs.
  • Ensure your motherboard's ARGB software is installed and configured to control the lighting.
  • Check for any physical damage to the ARGB cable or connector.
• ډېر شور/کمپن:
  • Ensure the fan is securely mounted and all screws/vibration-free mounts are properly tightened.
  • وګورئ چې کوم کیبلونه یا خنډونه د فین تیغونو سره لمس کوي.
  • Clean any dust buildup on the fan blades, as uneven dust distribution can cause imbalance and noise.
  • If the noise persists and is a grinding or rattling sound, the bearing may be faulty. Contact support if the fan is still under warranty.

8. تضمین او ملاتړ

د تضمین معلوماتو او تخنیکي ملاتړ لپاره، مهرباني وکړئ رسمي ترمالایټ ته مراجعه وکړئ webسایټ یا خپل پرچون پلورونکي سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.