پیژندنه
This manual provides detailed instructions for the installation, operation, and maintenance of your multicomp PRO Outdoor UHF Yagi TV Antenna. This antenna is designed to receive UHF television signals in the 470-862MHz frequency range, covering channels 21-69. Please read these instructions carefully before installation and retain this manual for future reference.
د محصول مشخصات
| مشخصات | ارزښت |
|---|---|
| د فریکونسی رینج | 470،862 ~ XNUMX،XNUMXMHz |
| چینلونه | 21-69 |
| خنډ | 75 اوم |
| ګټي | 12-18dBi |
| د مخ او شا تناسب | له 15 څخه تر 20dB پورې |
| Beam Width (Horz./Vert.) | H45°/V50° |
| د انتن اوږدوالی | 828 ملي میتره (. 32.6 inches انچه) |
| د عناصرو شمیر | 8 |
| د ماډل شمیره | MP011352 |
| UPC | 713179652139 |
تنظیم او نصب کول
Carefully unpack all components and ensure all parts are present before beginning assembly. Refer to the diagrams below for visual guidance.
1. د انتن مجلس
The antenna elements may need to be unfolded or attached. Ensure all elements are securely fastened as shown in the diagrams. Pay attention to the orientation of the elements for optimal performance.
د انځور تفصیل: This image displays the "UHF TV Antenna Operating Instructions" page. It includes technical data on the left and an "Antenna Connection" diagram on the right. The diagram shows an exploded view of the antenna with labels A, B, C, and D pointing to different sections. Below this, two smaller diagrams (A and B) illustrate how to secure the antenna elements and the central connection point.
د انځور تفصیل: This image continues the "UHF TV Antenna" manual, showing diagrams C and D. Diagram C illustrates the unfolding and securing of the antenna's reflector elements. Diagram D shows the mounting bracket assembly, indicating how the antenna attaches to a pole or mast.
2. د انتن نصبول
Mount the antenna in an elevated outdoor location, such as a roof or mast, ensuring a clear line of sight to broadcast towers. Use the provided mounting hardware to securely attach the antenna to a sturdy pole. The antenna should be oriented horizontally for optimal UHF reception.
د انځور تفصیل: A white multicomp PRO Outdoor UHF Yagi TV Antenna is shown mounted on a silver pole, angled upwards and to the right. The antenna features multiple horizontal elements and a central housing, indicating its directional design for receiving television signals.
3. خپل تلویزیون سره نښلول
- Connect a 75 Ohm coaxial cable (not included) to the antenna's F-connector.
- Route the coaxial cable from the antenna to your television or digital converter box.
- Connect the other end of the coaxial cable to the "Antenna In" or "RF In" port on your TV or converter box.
- If using a digital converter box, connect the converter box to your TV using an HDMI or composite video cable.
عملیات
- پاور آن: Turn on your television and/or digital converter box.
- ان پټ غوره کړئ: Set your TV's input source to "Antenna," "TV," or the input connected to your digital converter box.
- د چینل سکین: Access your TV's or converter box's menu and navigate to the "Channel Scan," "Auto Program," or "Auto Tune" function. Initiate the scan to find available over-the-air channels.
- د انتن تنظیم کول: If initial reception is poor, try slightly adjusting the antenna's direction and re-running the channel scan until optimal signal strength is achieved for desired channels.
ساتنه
- منظم معاینه: Periodically inspect the antenna, mounting hardware, and coaxial cable for any signs of wear, corrosion, or damage, especially after severe weather.
- پاکول: Gently clean the antenna elements with a soft cloth to remove dirt, dust, or debris that may accumulate and affect performance. Do not use harsh chemicals.
- خوندي اړیکې: Ensure all cable connections remain tight and free from moisture.
- خوندیتوب: When performing maintenance, always prioritize safety. If working at heights, use appropriate safety equipment or consult a professional.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| هیڅ سیګنال نشته یا ضعیف استقبال | Incorrect antenna aim, loose connections, obstructions, weak signal area. | Adjust antenna direction towards broadcast towers. Check all cable connections. Ensure clear line of sight. Consider a signal amplifier if in a weak signal area. |
| Missing channels after scan | Antenna not aimed correctly, incomplete channel scan. | Re-aim antenna and perform a full channel scan on your TV or converter box. |
| Picture pixelates or freezes | کمزوری سیګنال، مداخله. | Fine-tune antenna direction. Check for sources of interference (e.g., other electronics). |
تضمین او ملاتړ
Specific warranty information for the multicomp PRO Outdoor UHF Yagi TV Antenna (Model MP011352) is not provided in this document. For warranty details, technical support, or further assistance, please refer to the official multicomp PRO webسایټ ته مراجعه وکړئ یا مستقیم د دوی د پیرودونکو خدماتو سره اړیکه ونیسئ.
You can visit the multicomp PRO store on Amazon: multicomp PRO Store
