Veepeak L14-30R

Veepeak 30 Amp Flanged Outlet NEMA L14-30R Instruction Manual

Model: L14-30R

پیژندنه

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Veepeak 30 Amp Flanged Outlet NEMA L14-30R Locking Receptacle. Please read all instructions carefully before installation and use. Retain this manual for future reference.

د خوندیتوب معلومات

خبرداری: Electrical shock hazard. Improper installation or use can result in serious injury or death. Always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

  • د دې وسیلې نصبولو یا خدمت کولو دمخه تل د سرکټ بریکر یا فیوز بکس کې بریښنا قطع کړئ.
  • Ensure all wiring connections are secure and correct according to the wiring diagram and local codes.
  • د وسیلې له ټاکل شوي بریښنایی درجې څخه ډیر مه کوئ.
  • This product is designed for use with NEMA L14-30P compatible plugs only.
  • Keep the weatherproof cap closed when the outlet is not in use to protect against moisture and dust.

د بسته محتويات

  • 1 x Veepeak 30 Amp NEMA L14-30R Flanged Outlet
  • د نصبولو پیچ

مشخصات

مشخصاتارزښت
Ampزمانه30 Amps
والیtage۱۲۰/۲۴۰ ولټه AC
د NEMA ترتیبL14-30R
Poles / Wires3 Pole, 4 Wire Grounding
اعظمي بار7500 واټ
وړاندیز شوی تار ګیج10 AWG/4C
موادپولی وینیل کلورایډ (PVC)
تصدیقونهETL Listed (Conforms to UL & CSA standards)
د اړتیا وړ سوراخ اندازه2.5 انچه

تنظیم او نصب کول

اړین وسایل: Screwdriver, wire strippers, drill (for mounting hole), appropriate drill bit.

  1. د نصبولو ځای چمتو کول: Choose a suitable, dry location for installation. Drill a 2.5-inch diameter hole for the receptacle body. Ensure there is enough space behind the mounting surface for wiring connections.
  2. د تارونو نښلول:

    Refer to the wiring diagram below and the color-coded terminals on the back of the receptacle. Strip approximately 1/2 inch of insulation from each wire. Insert the wires into the corresponding terminals and tighten the screws securely. Ensure no bare wire strands are exposed outside the terminals.

    شاته view of the Veepeak L14-30R flanged outlet showing color-coded wiring terminals.

    انځور: شاته view of the L14-30R outlet, displaying the four color-coded terminals for wiring connections (Green for Ground, White for Neutral, Red and Black for Hot).

    NEMA L14-30R wiring diagram showing X, Y, W, G terminals for 125/250 Volt, 30 Amp پیوستون

    Image: NEMA L14-30R configuration diagram. 'X' and 'Y' are hot lines (125V each to neutral, 250V between them), 'W' is neutral, and 'G' is ground.

    • Green (G): د ځمکې تار.
    • سپین (W): بې طرفه تار.
    • Black (X): Hot wire (Line 1).
    • Red (Y): Hot wire (Line 2).
  3. Mount the Receptacle: Insert the receptacle body into the drilled hole. Secure the flanged outlet to the mounting surface using the provided screws. Ensure it is flush and stable.
  4. د بریښنا بیرته راګرځول: کله چې نصب بشپړ شي او ټولې اړیکې تایید شي، په سرکټ بریکر کې بریښنا بیرته راوباسئ.
مخکی view of the Veepeak L14-30R flanged outlet with the weatherproof cap open, showing the locking receptacle.

انځور: مخکینۍ برخه view of the Veepeak L14-30R flanged outlet with its weatherproof cap open, revealing the NEMA L14-30R locking receptacle.

عملیاتي لارښوونې

  1. Opening the Cap: Lift the weatherproof cap to access the receptacle.
  2. Connecting a Plug: Align the NEMA L14-30P plug with the receptacle. Insert the plug and twist clockwise to lock it into place. Ensure the plug is fully seated and locked.
  3. Disconnecting a Plug: Twist the plug counter-clockwise to unlock, then pull it straight out from the receptacle.
  4. Closing the Cap: When the outlet is not in use, ensure the weatherproof cap is securely closed over the receptacle to protect it from environmental elements like rain, snow, and dust.
مخکی view of the Veepeak L14-30R flanged outlet with the weatherproof cap closed, protecting the receptacle.

انځور: مخکینۍ برخه view of the Veepeak L14-30R flanged outlet with its weatherproof cap securely closed, providing protection.

ساتنه

منظم ساتنه غوره فعالیت او خوندیتوب تضمینوي.

  • پاکول: Periodically clean the exterior of the outlet with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the cap is closed during cleaning.
  • معاینه: Regularly inspect the outlet for any signs of damage, wear, or corrosion. Check the weatherproof cap for proper sealing.
  • د پیوستون چک: Annually, or if issues arise, disconnect power and check the wiring connections for tightness. Loose connections can cause overheating.

د ستونزو حل کول

  • ځواک نشته:
    • Check the circuit breaker or fuse for the circuit. Reset if tripped.
    • ډاډ ترلاسه کړئ چې د بریښنا سرچینه فعاله ده.
    • ډاډ ترلاسه کړئ چې پلګ په بشپړ ډول داخل شوی او په استخراج کې تړل شوی دی.
  • لوز پیوستون:
    • If the plug feels loose or power is intermittent, disconnect power and inspect the wiring connections at the back of the receptacle for tightness.
    • Inspect the plug on the appliance for damage.
  • Damage to Outlet:
    • If the outlet housing or terminals show signs of damage, cracking, or burning, discontinue use immediately and replace the unit.

که چیرې د ستونزو د حل کولو ګامونه ستونزه حل نه کړي، نو د وړ بریښنایی متخصص سره مشوره وکړئ.

تضمین او ملاتړ

Veepeak provides a one-year hassle-free replacement warranty for this product. For warranty claims or customer service inquiries, please contact Veepeak customer support through the retailer where the product was purchased or visit the official Veepeak webسایټ

اړوند اسناد - L14-30R

مخکېview FAQs und Fehlerbehebung für Veepeak OBDCheck VP11
Umfassende FAQs und detaillierte Fehlerbehebung für den Veepeak OBDCheck VP11 (V2.2509). Finden Sie Antworten auf häufige Fragen zur Kompatibilität, Verbindung und Nutzung mit verschiedenen Fahrzeugen und Apps.
مخکېview د OBDCheck BLE په اړه پوښتنې او د ستونزو حل کولو لارښود
د Veepeak OBDCheck BLE OBD-II سکینر لپاره جامع FAQ او د ستونزو حل کولو لارښود. د اپلیکیشن مطابقت، د وسایطو ملاتړ، د اتصال مسلو، او کارولو په اړه د عامو پوښتنو ځوابونه ومومئ.
مخکېview د Veepeak OBDCheck BLE کارونکي لارښوونې
د Veepeak OBDCheck BLE بلوتوث OBD II سکینر لپاره د کارونکي لارښوونې، چې د موټر مطابقت، د اپلیکیشن سپارښتنې، د تنظیم لارښود، FAQs، د ستونزو حل کول، تضمین، او رد کول پوښي.
مخکېview د Veepeak OBDCheck VP11 کارونکي لارښوونې او لارښود
د Veepeak OBDCheck VP11 OBD-II سکین وسیلې لپاره جامع کارونکي لارښوونې، چې د موټر مطابقت، د اپلیکیشن سپارښتنې، تنظیم، FAQs، ستونزې حل کول، او د تضمین معلومات پوښي.
مخکېview د VEEPEAK OBDCheck VP11 کارن لارښود: ځانګړتیاوې، تنظیم، او د ستونزو حل کولو لارښود
د VEEPEAK OBDCheck VP11 بلوتوث OBD2 تشخیصي سکینر لپاره جامع کارن لارښود. د هغې د ځانګړتیاوو، د تنظیم کولو لارښوونو، مناسبو موټرو او ایپسونو، د ستونزو حل کولو لارښوونو، او ملاتړ معلوماتو په اړه زده کړه وکړئ.
مخکېview Veepeak OBDCheck VP11 User Instructions: OBD-II Scan Tool Guide
Comprehensive user guide for the Veepeak OBDCheck VP11 Bluetooth OBD-II scan tool. Learn about vehicle compatibility, recommended Android apps, setup, troubleshooting, and warranty information for diagnosing your vehicle's engine and systems.