Jcpower Rmini-2400.1 Mono Block Class D Ampد لوړ کارونکي لارښود

1. پیژندنه

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Jcpower Rmini-2400.1 Mono Block Class D Ampژوندی کوونکی. مهرباني وکړئ د نصبولو یا چلولو هڅه کولو دمخه دا لارښود په بشپړ ډول ولولئ amplifier to ensure proper function and safety. This amplifier is designed to power subwoofers in a car audio system.

2. د خوندیتوب معلومات

• د مسلکي نصب کولو وړاندیز شوی: Installation of car audio equipment can be complex. If you are unsure about any aspect of the installation, consult a qualified professional.
• د بریښنا سرچینه: Ensure the vehicle's battery is disconnected before beginning any wiring to prevent electrical shorts and damage.
• وینټیلیشن: نصب کړئ amplifier in a location that allows for adequate airflow to prevent overheating. The built-in smart fan requires proper ventilation to function effectively.
• د رطوبت څرګندونه: دا ampژوندی کوونکی دی پنروک نه. Do not expose it to moisture or liquids.
• د سپیکر مطابقت: This is a mono block amplifier primarily designed for subwoofers. It is not suitable for use with full-range speakers that come with your car. Ensure your subwoofers are compatible with 1 or 2 ohm loads.
• Physical Fitment: تایید کړئ چې د amplifier can physically fit in the intended installation space within your vehicle before proceeding with installation.
• تارونه: Use appropriate gauge wiring (4 gauge for power and ground) and ensure all connections are secure and properly insulated.

3. د محصول ب Featuresې

The Jcpower Rmini-2400.1 amplifier incorporates advanced technology and robust construction to deliver powerful and clear bass performance. Key features include:

• د لوړ بریښنا تولید: Delivers up to 2400 watts peak power, with nominal ratings of 800 watts RMS at 2 ohms and 500 watts RMS at 4 ohms.
• Class D Technology: Efficient and reliable performance with minimal heat generation.
• Subwoofer Compatibility: Designed to work with 1-ohm and 2-ohm subwoofers.
• د تنظیم وړ باس بوسټ: Fine-tune your bass output from 0 to 18 dB.
• Variable Low-Pass Crossover (LPF): Adjustable from 40 Hz to 220 Hz for precise frequency control.
• Variable Subsonic Filter: Adjustable from 25 Hz to 50 Hz to protect subwoofers from damaging ultra-low frequencies.
• حرارتي محافظت: Built-in circuit protects the ampد ډیر تودوخې څخه خلاصونکی.
• Smart Fan Cooling: Maintains optimal operating temperature during demanding use.
• ناڅاپه ساختمان: Features a heavy-duty metal enclosure and durable heat sink for long-lasting performance.
• CEA-2006 Compliant: Meets industry standards for power and efficiency.

4. ترتیب او نصب کول

د غوره فعالیت او خوندیتوب لپاره سم نصب کول خورا مهم دي. دا ګامونه په دقت سره تعقیب کړئ.

4.1 پیک کول او تفتیش کول

په دقت سره لرې کړئ amplifier from its packaging and inspect it for any signs of damage. If any damage is found, contact your dealer immediately.

شکل 1: پورته view of the Jcpower Rmini-2400.1 ampژوندی کوونکی، ښودونکیasing its black finish and Jcpower Audio Systems branding.

4.2 پورته موقعیت

د نصبولو ځای غوره کړئ چې:

• Provides adequate ventilation for the amplifier's cooling fan.
• د رطوبت او مستقیم لمر وړانګو څخه خوندي دی.
• Is secure and will not interfere with vehicle operation or safety features.
• Allows for short power and ground wire runs.

4.3 د تارونو نښلول

Refer to the diagram below for proper wiring connections. Ensure all connections are tight and insulated.

شکل 2: View of the power, remote, ground, and speaker output terminals on the Jcpower Rmini-2400.1 ampلايف

1. ځواک (+12V): Connect a 4-gauge power cable directly from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Install an appropriate fuse (not included) within 18 inches of the battery.
2. ځمکه (GND): Connect a 4-gauge ground cable from the GND terminal on the amplifier to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection.
3. ریموټ (REM): د خپل سر واحد د ریموټ آوټ پټ څخه د ریموټ ټرن آن تار د REM ټرمینل سره وصل کړئ ampلایفیر. دا تار ګرځوي ampد خپل سر واحد سره لایفیر چالان او بند کړئ.
4. د سپیکر محصول: Connect your subwoofer(s) to the speaker output terminals. Ensure correct polarity (+ to + and - to -). This ampلایفیر د 1-ohm او 2-ohm بارونو ملاتړ کوي.
5. RCA ننوت: Connect RCA cables from your head unit's subwoofer output (or full-range output if using a crossover) to the RCA input jacks on the ampلايف

5. عملیاتي لارښوونې

یوځل چې نصب شي، تنظیم کړئ ampد غوره آډیو فعالیت لپاره د ژوندي کولو ترتیبات.

شکل 3: Control panel of the Jcpower Rmini-2400.1 amplifier, showing the gain, LPF, subsonic filter, and bass boost adjustment knobs.

1. Gain Control (INPUT): دا کنټرول سره سمون لري amplifier's input sensitivity to the output level of your head unit. Start with the gain set to minimum (MIN). Play a familiar track at about 75% of your head unit's maximum volume. Slowly increase the ampد لایفیر ګټه تر هغه وخته پورې چې تاسو تحریف واورئ، بیا یې یو څه بیرته بند کړئ.
2. د ټیټ پاس فلټر (LPF): This filter allows only frequencies below the set point to pass through to the subwoofer. Adjust the LPF from 40 Hz to 220 Hz to blend the subwoofer's output seamlessly with your main speakers. A common starting point is 80-100 Hz.
3. Subsonic Filter (SUBSONIC): This filter removes ultra-low frequencies (below 25-50 Hz) that are inaudible but can cause subwoofers to over-excurt and waste power. Adjust this setting to protect your subwoofer, typically set slightly below your subwoofer's port tuning frequency (if ported) or around 25-30 Hz for sealed enclosures.
4. Bass Boost (BASS): This control provides an adjustable boost to bass frequencies (0-18 dB). Use sparingly to avoid distortion and potential damage to your subwoofer.
5. د LED شاخصونه:
   • بریښنا (شین): ته اشاره کوي ampلایفیر فعال دی او په نورمال ډول کار کوي.
   • PRT (Red): ته اشاره کوي amplifier is in protection mode due to overheating, low impedance, or a short circuit.

6. ساتنه

ستاسو د اوږد عمر او غوره فعالیت ډاډمن کولو لپاره ampد ژوندي کولو لپاره، د ساتنې دا لارښوونې تعقیب کړئ:

• وچ ساتل: لکه څنګه چې amplifier is not waterproof, ensure it remains in a dry environment. Avoid spills or exposure to rain.
• پاکوالی: په دوره توګه پاک کړئ amplifier's exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the cooling fins and fan are free from dust and debris to maintain proper airflow.
• د پیوستون چکونه: Regularly inspect all wiring connections (power, ground, remote, speaker, RCA) to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
• وینټیلیشن: ډاډ ترلاسه کړئ چې د amplifier's mounting location continues to provide adequate ventilation. Do not block the cooling fan or heat sink.

7. ستونزه حل کول

که تاسو د خپل ampد ژوندي کولو لپاره، لاندې د ستونزو حل کولو لارښود وګورئ:

8. مشخصات

9. تضمین او ملاتړ

For warranty information or technical support, please contact Jcpower Audio Systems USA, the seller of this product. Keep your purchase receipt as proof of purchase for any warranty claims.

پلورونکی: Jcpower Audio Systems USA

Refer to your purchase documentation or the seller's contact information for specific warranty terms and support channels.