د اینهیل TC-BD 630/1 ډرل پریس کارونکي لارښود

محصول پای ته ورسیدview

The Einhell TC-BD 630/1 drill press is a precision tool designed for various drilling tasks in wood and metal. It features a robust construction and adjustable settings to accommodate different materials and drilling requirements. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.

شکل 1: مخکی view of the Einhell TC-BD 630/1 Drill Press, showcasing its red and black housing, the drill chuck, and the adjustable work table.

د خوندیتوب لارښوونې

د وسیلې د ټپي کیدو او زیان څخه د مخنیوي لپاره تل لاندې خوندیتوب احتیاطي تدابیر په پام کې ونیسئ.

• Read and understand all instructions before operating the drill press.
• مناسب شخصي محافظتي تجهیزات (PPE) واغوندئ، په شمول د خوندیتوب عینکې، د اوریدلو محافظت، او دستکشې.
• ډاډ ترلاسه کړئ چې ورک پیس په خوندي ډول cl دیampد برمه کولو دمخه ایډ.
• Keep hands and fingers away from the rotating drill bit.
• Disconnect power before making adjustments, changing bits, or performing maintenance.
• ماشین په d کې مه چلوئamp یا لوند شرایط.
• ډاډ ترلاسه کړئ چې د کار ساحه ښه روښانه او له ګډوډۍ څخه پاکه ده.
• The on/off switch with zero voltage trigger prevents accidental restart after a power failure.

تنظیم او مجلس

د لومړي ځل کارولو دمخه، ډاډ ترلاسه کړئ چې ټولې برخې شتون لري او په سمه توګه راټول شوي دي.

1. بسته بندي کول: Carefully remove all parts from the packaging. Verify against the packing list.
2. د اساس او ستنې اسمبلۍ: Securely attach the column to the base using the provided fasteners.
3. Headstock Installation: Mount the headstock onto the top of the column.
4. Work Table Attachment: Slide the work table assembly onto the column and secure it at a comfortable working height.
5. د چک نصب کول: Insert the toothed crown chuck and MK2 chuck onto the spindle. Ensure it is firmly seated.
6. Chip Guard Installation: Attach the folding chip guard for safety during operation.

2 شکل: تفصیل view of the drill chuck and the transparent, folding chip guard, emphasizing safety features.

عملیاتي لارښوونې

Follow these steps for safe and effective operation of your drill press.

1. Adjusting Drilling Speed

The drill press offers 12 speed levels (200 to 2,450 rpm) to suit different materials. Speed adjustment is done by changing the belt position on the pulleys located in the headstock.

1. د بریښنا رسولو قطع کول.
2. Open the top cover of the headstock.
3. Loosen the motor tensioning bolt to allow belt movement.
4. Move the belt to the desired pulley combination for the required speed. Refer to the speed chart inside the cover.
5. Retighten the motor tensioning bolt and close the cover.

شکل 3: داخلي view of the drill press headstock, showing the belt and pulley system used for adjusting drilling speeds.

2. Adjusting Work Table

The work table can be adjusted for height, rotation, and tilt to accommodate various workpieces.

• د لوړوالی سمون: Loosen the table locking handle and use the crank to move the table up or down the column. Securely tighten the handle once the desired height is reached.
• گردش: The table can rotate up to 90° around the column. Loosen the table locking handle, rotate, and retighten.
• ټیلټ: The table can tilt up to 45° left or right. Loosen the tilt locking bolts, adjust the angle, and retighten.

Figure 4: Illustration demonstrating the vertical height adjustment of the drill press work table.

Figure 5: Illustration demonstrating the tilt adjustment of the drill press work table, allowing angled drilling.

3. Setting Drilling Depth

The adjustable depth stop allows for precise and repeatable drilling up to a maximum depth of 60 mm.

1. Lower the drill bit until it just touches the workpiece.
2. Lock the spindle in this position.
3. Adjust the depth stop collar to the desired drilling depth.
4. Unlock the spindle. The drill will stop at the preset depth during operation.

Figure 6: Detail of the adjustable depth stop, which ensures consistent drilling depth for repetitive tasks.

4. Drilling Operation

Figure 7: A user demonstrating the drill press in action, drilling into a wooden workpiece, highlighting proper usage.

1. Select the appropriate drill bit (1.5 to 16 mm diameter) and secure it firmly in the chuck.
2. Position the workpiece on the table and clamp it securely to prevent movement during drilling.
3. Adjust the table height and depth stop as needed.
4. Turn on the drill press using the ON switch.
5. Slowly lower the drill bit into the workpiece using the three-arm cross handle, applying steady, even pressure.
6. Once drilling is complete, retract the drill bit from the workpiece.
7. Turn off the drill press using the OFF switch.

ساتنه

Regular maintenance ensures the longevity and optimal performance of your drill press.

• پاکول: After each use, clean the machine of dust, chips, and debris. Use a brush or vacuum cleaner. Do not use solvents that may damage plastic parts.
• غوړول: Periodically apply a light machine oil to moving parts such as the column, rack, and spindle.
• د کمربند معاینه: Regularly check the drive belt for wear, cracks, or tension. Replace if necessary.
• د چک ساتنه: Keep the chuck jaws clean and free of debris to ensure proper gripping of drill bits.
• ذخیره کول: Store the drill press in a dry, clean environment when not in use.

د ستونزو حل کول

مشخصات

Key technical specifications for the Einhell TC-BD 630/1 Drill Press.

شکل 8: مخکی view technical drawing with key dimensions, including drilling depth and table size.

شکل 9: اړخ view technical drawing with overall height and table adjustment range.

• ماډل: TC-BD 630/1 (4520597)
• د بریښنا ننوتل: 630 W
• والیtage: 230 ولټه
• د سرعت کچه: 12 (200 - 2,450 rpm)
• Drilling Depth (max.): 60 ملي متره
• Drill Diameter (max.): 16 ملي متره
• د چک ډول: Toothed crown chuck with MK2 chuck
• د جدول تنظیم: Height adjustable, 90° rotatable, 45° tiltable
• د محصول ابعاد: 33.5 x 83.2 x 57 سانتي متره
• د توکي وزن: 19.4 کیلو ګرامه
• ځانګړي ځانګړتیاوې: Induction motor, ball bearing drill spindle, adjustable depth stop, folding chip guard.

تضمین او ملاتړ

For warranty information, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webسایټ. د پیرود ثبوت په توګه د پیرود رسید وساتئ.

تاسو کولی شئ نور معلومات او د اړیکو جزئیات په لاندې لینک کې ومومئ د اینهیل پلورنځي پاڼه.