aigo AC SE 360 Water Cooler Instruction Manual

پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AC SE 360 All-in-One (AIO) Liquid CPU Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance.

د خوندیتوب معلومات

• ډاډ ترلاسه کړئ چې ستاسو کمپیوټر د نصبولو دمخه د دیوال له آوټ لیټ څخه بند او خلاص شوی دی.
• د زیان څخه د مخنیوي لپاره اجزا په احتیاط سره اداره کړئ.
• Refer to your motherboard manual for specific CPU socket and fan header locations.
• Do not attempt to open the pump or radiator as this may void the warranty and cause leaks.
• د ماشومانو د لاسرسي څخه لرې وساتئ.

د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري.

• aigo AC SE 360 Radiator with Integrated Pump/Water Block
• 3 x 120mm د یخولو فین
• Mounting Hardware for Intel Sockets (LGA 2066/2011-V3/2011/1700/1366/1200/115X)
• Mounting Hardware for AMD Sockets (FM1/FM2/FM2+/AM2/AM2+/AM3/AM3+/AM4)
• حرارتي پیسټ (مخکې له مخکې کارول شوی یا په ټیوب کې)
• Fan Screws and Radiator Screws
• د کارونکي لارښود (دا لاسوند)

مشخصات

تنظیم او نصب کول

This section guides you through the installation process of the aigo AC SE 360 liquid cooler. Ensure your system is powered off and unplugged before proceeding.

1. Prepare the Radiator and Fans

Attach the three 120mm fans to the radiator using the provided long screws. Ensure the fan airflow direction is appropriate for your case's cooling strategy (typically pushing air through the radiator and out of the case, or pulling air in).

انځور: پورته-ښکته view of the radiator with fans installed. This shows the orientation of the fans on the radiator.

انځور: زاویه لرونکی شا view of the assembled cooler, highlighting the fans and radiator structure.

2. Install the Radiator in the PC Case

Mount the assembled radiator and fan unit into your PC case. Common mounting locations include the top or front of the case. Use the shorter screws provided to secure the radiator to the case's fan mounts. Ensure there is adequate clearance for the tubes and other components.

Image: Detail of the radiator fins and mounting points, useful for understanding case installation.

۱. د CPU ساکټ چمتو کړئ

Select the appropriate mounting bracket for your CPU socket (Intel or AMD). Attach the backplate (if required for your socket type) to the rear of the motherboard. Install the standoffs onto the motherboard around the CPU socket.

4. Install the Water Block/Pump

Ensure the CPU surface is clean. If thermal paste is not pre-applied to the water block, apply a small pea-sized amount to the center of your CPU's integrated heat spreader (IHS). Carefully place the water block onto the CPU, aligning it with the standoffs. Secure the water block with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

انځور: اړخ view of the pump/water block, illustrating its compact design.

انځور: زاویه لرونکی view of the complete cooler assembly, showing the connection between the pump and radiator.

5. کیبلونه وصل کړئ

• Connect the pump's power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. Consult your motherboard manual for the correct header.
• Connect the fan cables to the CPU_FAN header or a dedicated fan controller/hub. If your fans have RGB lighting, connect the RGB cables to a compatible RGB header on your motherboard or an RGB controller.
• Ensure all cables are routed neatly and do not interfere with other components or airflow.

انځور: مخکینۍ برخه view of the cooler with RGB lighting, demonstrating the aesthetic appearance after installation and power connection.

عملیاتي لارښوونې

Once installed, the aigo AC SE 360 operates automatically. The pump and fans will adjust their speed based on CPU temperature, managed by your motherboard's BIOS/UEFI settings or dedicated software.

• ابتدايي بریښنا فعاله: After installation, power on your computer. Monitor CPU temperatures using system monitoring software to ensure proper function.
• د BIOS/UEFI ترتیبات: Access your motherboard's BIOS/UEFI to verify that the CPU_FAN header (or AIO_PUMP header) is set to PWM mode and that fan curves are configured for optimal cooling and noise levels.
• د RGB کنټرول: If your motherboard supports RGB synchronization, use its software to customize the lighting effects of the fans and pump.

ساتنه

منظم ساتنه ستاسو د مایع کولر اوږد عمر او غوره فعالیت ډاډمن کولو کې مرسته کوي.

• د دوړو پاکول: د ریډیټر د پنکو او فین تیغونو څخه دوړې په دوره یي ډول د فشار شوي هوا یا نرم برش په کارولو سره پاکې کړئ. د دوړو راټولیدل کولی شي د هوا جریان خنډ کړي او د یخولو موثریت کم کړي.
• د ټیوب معاینه: Occasionally inspect the tubes for any signs of kinks, leaks, or damage.
• د فین چیک: Ensure all fans are spinning freely and quietly. If a fan becomes noisy or stops spinning, it may need replacement.
• Pump Check: Listen for any unusual noises from the pump. A constant, low hum is normal, but grinding or gurgling sounds may indicate an issue.

د ستونزو حل کول

تضمین او ملاتړ

aigo products are designed for reliability and performance. For warranty information, technical support, or replacement parts, please refer to the official aigo webسایټ یا خپل پرچون پلورونکي سره اړیکه ونیسئ.

رسمي Webسایټ: www.aigo.com (یادونه: دا یو ځای ساتونکی دی URL. مهرباني وکړئ د سم ملاتړ لپاره د خپل محصول بسته بندۍ یا رسمي اسنادو ته مراجعه وکړئ. webسایټ)

Please have your product model number (ACSE360-WH) and purchase date ready when contacting support.