MAC AmeriBRAKES Performance High Heat Carbon Brake Drum Kit Instruction Manual

1. محصول ختم شوview

This manual provides detailed instructions for the installation, operation, and maintenance of the MAC AmeriBRAKES Performance High Heat Carbon Brake Drum Kit. This kit is designed as an OE style replacement for Toyota Tacoma 4x4 6-Lug models manufactured between 2005 and 2022, including Pre Runner models with 6 Lug Rotors (2005-2015). The components are engineered for outstanding durability and consistent performance, meeting or exceeding OE specifications.

شکل 1.1: Complete MAC AmeriBRAKES Performance High Heat Carbon Brake Drum Kit. This image displays all components included in the kit, such as two brake drums, brake shoes, brake spring mounting kit, star wheel adjusters, wheel cylinders, brake hoses, and a brake bleeder tool kit.

2. د خوندیتوب معلومات

Always prioritize safety when working on vehicle brake systems. Improper installation or maintenance can lead to serious injury or vehicle malfunction. If you are unsure about any step, consult a qualified automotive technician.

• مناسب شخصي محافظتي تجهیزات (PPE) واغوندئ، په شمول د خوندیتوب عینکې او دستکشې.
• د هر کار پیل کولو دمخه ډاډ ترلاسه کړئ چې موټر په خوندي ډول د جیک سټینډونو په سطحه په یوه هواره سطحه کې ملاتړ شوی دی. هیڅکله یوازې په جیک تکیه مه کوئ.
• که چیرې د تطبیق وړ وي، د بریښنایی برخو کار کولو دمخه د موټر بیټرۍ قطع کړئ.
• Brake fluid is corrosive. Avoid contact with skin and vehicle paint. Clean up spills immediately.
• Dispose of old brake components and fluids according to local regulations.
• Do not reuse worn or damaged components.

3. د کټ اجزا

The AmeriBRAKES Performance Carbon Rear Drum Brake Kit includes the following parts:

• 2x Part# DB794115: AmeriBRAKES Off Road Performance High Heat, High Carbon Content Rear Brake Drums
• 1x Part# 871: AmeriBRAKES Rear Brake Shoe Set (4 Shoes, for both rear sides)
• 1x Part# 17432K: Rear Brake Shoe Brake Spring Mounting Kit (for both rear sides)
• 1x Part# 2812K: Left Rear Star Wheel Adjuster Kit
• 1x Part# 2813K: Right Rear Star Wheel Adjuster Kit
• 2x Part# W131480: Rear Left and Right Wheel Cylinders
• 1x Part# 2204095: Left Rear Brake Hose
• 1x Part# 2204096: Right Rear Brake Hose
• 1x Part# W80626: One Man Brake Bleeder Tool Kit

شکل 3.1: AmeriBRAKES High Heat Carbon Rear Brake Drums (Part# DB794115). These drums feature a high carbon content for enhanced heat dissipation and durability.

شکل 3.2: AmeriBRAKES Rear Brake Shoe Set (Part# 871). This image shows the four brake shoes included in the kit, designed for optimal friction and wear resistance.

4. ترتیب او نصب کول

This section outlines the general procedure for installing the brake drum kit. Refer to your vehicle's specific service manual for detailed torque specifications and additional model-specific instructions.

4.1. اړین وسایل

• جیک او جیک ولاړ دي
• د څرخ چاکس
• لوګ رنچ
• Brake Spoon/Adjusting Tool
• Brake Spring Pliers
• د ساکټ سیټ او ریچټ
• د تورک رنچ
• د بریک کلینر
• د بریک مایع
• Bleeder Wrench

4.2. د نصب کولو دمخه چکونه

• Verify that all kit components match the parts removed from the vehicle.
• Inspect new components for any shipping damage.
• Ensure the vehicle is cool before starting work.

4.3. د نصبولو طرزالعمل

1. موټر چمتو کړئ: Park the vehicle on a level surface, engage the parking brake, and chock the front wheels. Loosen the rear lug nuts, then raise the rear of the vehicle and secure it with jack stands. Remove the rear wheels.
2. Remove Old Drum: If the drum is stuck, use a rubber mallet to tap around the drum face. If equipped, remove any retaining clips or screws.
3. Remove Old Brake Components: Carefully remove the brake return springs, hold-down springs, brake shoes, and star wheel adjuster. Note the orientation of all components for reassembly. Disconnect the old wheel cylinder and brake hose.
4. Install New Wheel Cylinder and Brake Hose: Install the new wheel cylinder (Part# W131480) and brake hose (Part# 2204095/2204096). Ensure all connections are secure and properly torqued.
5. Assemble New Brake Shoes: Install the new brake shoes (Part# 871) and the brake spring mounting kit (Part# 17432K). Ensure all springs are correctly positioned and tensioned. Install the new star wheel adjusters (Part# 2812K/2813K).
6. Install New Brake Drum: Clean the inside surface of the new brake drum (Part# DB794115) with brake cleaner. Carefully slide the new drum over the brake shoes. If the drum does not fit, the star wheel adjuster may need to be backed off slightly.
7. د بریک بوټان تنظیم کړئ: Adjust the star wheel adjuster through the access hole in the backing plate until the drum has a slight drag when rotated by hand.
8. د بلیډ بریک سیسټم: Using the provided one-man brake bleeder tool kit (Part# W80626), bleed the brake system to remove any air introduced during the hose and wheel cylinder replacement. Follow standard brake bleeding procedures, starting with the wheel furthest from the master cylinder.
9. Reinstall Wheels: Reinstall the wheels, hand-tighten the lug nuts, lower the vehicle, and then torque the lug nuts to the manufacturer's specifications.

۳. عملیاتي ملاحظات

5.1. Brake System Break-In

After installing new brake drums and shoes, a proper break-in procedure is crucial for optimal performance and longevity. This process helps to seat the brake shoes to the drum surface and burn off any manufacturing residues.

• موټر په اعتدال سرعت سره چل کړئ (د مثال په توګه، 30-40 میل فی ساعت).
• Apply the brakes moderately (not hard) to slow down to about 10 mph. Do not come to a complete stop.
• Repeat this process approximately 10-15 times, allowing a few minutes between each cycle for the brakes to cool.
• Avoid heavy braking or prolonged stops immediately after installation.
• After the break-in period, allow the brakes to cool completely before normal driving.

6. ساتنه

Regular inspection and maintenance of your brake system are essential for safety and performance.

۱. منظم تفتیشونه

• Inspect brake shoes for wear at least every 12,000 miles or annually. Replace if friction material is less than 2mm thick.
• Check brake drums for excessive wear, scoring, or cracks. Drums should be replaced if they exceed the maximum diameter stamped on the drum or show significant damage.
• Inspect wheel cylinders for leaks. Replace if any leakage is observed.
• Check brake hoses for cracks, bulges, or leaks. Replace if any damage is found.
• Ensure the parking brake operates correctly and adjusts properly.

6.2. پاکول

Periodically clean brake dust from the drum assembly using an approved brake cleaner. Avoid inhaling brake dust, as it may contain harmful particles.

7. ستونزه حل کول

8. مشخصات

• جوړونکی: Mac Auto Parts
• نښه: MAC / AmeriBRAKES
• د ماډل شمیره: 206950
• Brake Drum Part Number: DB794115
• مطابقت: Toyota Tacoma 4x4 6-Lug (2005-2022), Toyota Tacoma Pre Runner with 6 Lug Rotors (2005-2015)
• Brake Drum Material: High Heat, High Carbon Content
• تصدیق: Manufactured by ISO certified factories to meet requirements of fit, form, and function.

شکل 8.1: Carbon Content Percentage Comparison. This chart illustrates the carbon content of AmeriPLATINUM products compared to OE baseline and competitive brands, highlighting the role of carbon in determining rotor strength and heat management.

9. تضمین او ملاتړ

The warranty for your MAC AmeriBRAKES Performance High Heat Carbon Brake Drum Kit is stated on the product listing at the time of purchase. For specific warranty details or any product-related inquiries, please contact MAC Auto Parts customer support.

شکل 9.1: Warranty Information. This graphic confirms that warranty details are available on the product listing and encourages customers to contact support for questions.