Leviton LB260-EST

Leviton LB260-EST 2nd Gen Smart GFPE Circuit Breaker Instruction Manual

Model: LB260-EST | Brand: Leviton

پیژندنه

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Leviton 2nd Generation Smart GFPE (Ground Fault Protection of Equipment) Branch Circuit Breaker, Model LB260-EST. This smart circuit breaker features remote control capabilities and plug-on installation, supporting both 120/208 VAC and 120/240 VAC applications. It is designed to integrate with the My Leviton app for enhanced energy management and safety features.

د خوندیتوب معلومات

خبرداری: Risk of electric shock. Installation and servicing of this product must be performed by a qualified electrician. Ensure power is disconnected at the main service panel before installation or maintenance. Failure to follow these instructions may result in serious injury or death.

  • Always turn off power at the main circuit breaker before working on electrical circuits.
  • مناسب شخصي محافظتي تجهیزات (PPE) وکاروئ.
  • ډاډ ترلاسه کړئ چې ټولې اړیکې خوندي دي او د محلي او ملي بریښنا کوډونو سره سم په سمه توګه تار شوي دي.
  • که چیرې د سرکټ بریکر خراب ښکاري نو مه یې چلوئ.
  • This device is intended for use with the Leviton Load Center only.

په بکس کې څه دي

ستاسو کڅوړه باید لاندې توکي ولري:

  • 1 x Leviton 2nd Gen Smart Circuit Breaker (Model LB260-EST)
  • 1 x Installation Instructions (this manual)

تنظیم او نصب کول

The Leviton LB260-EST Smart Circuit Breaker is designed for plug-on installation within a Leviton Load Center. A Whole Home Energy Monitor (LWHEM) is required for smart functionality.

  1. د بارولو مرکز چمتو کړئ: Ensure all power to the Leviton Load Center is OFF at the main disconnect.
  2. Wire the Load Center: The Leviton Load Center's design allows for branch phase and neutral connections to be made directly on the panel. Wires can be neatly landed at rough-in without any circuit breakers present, simplifying the wiring process.
  3. Install the Circuit Breaker: Once wiring is complete, align the LB260-EST circuit breaker with the appropriate slot in the Leviton Load Center. Firmly push the breaker into place until it clicks, ensuring a secure plug-on connection. No additional wiring is required for the breaker itself once the panel is wired.
  4. د بریښنا بیرته راګرځول: After all circuit breakers are installed and the panel cover is secured, restore power to the main service panel.
  5. My Leviton App Integration: Download the My Leviton app from your device's app store. Follow the in-app instructions to connect your Leviton Load Center and LB260-EST Smart Circuit Breaker to your home network. This step requires a Leviton Whole Home Energy Monitor (LWHEM).
Leviton LB260-EST 2nd Gen Smart GFPE Circuit Breaker
شکل 1: مخکی view of the Leviton LB260-EST 2nd Gen Smart GFPE Circuit Breaker. This image shows the ON/OFF/TEST switch and the GFPE indicator.
اړخ view of Leviton LB260-EST Smart Circuit Breaker
شکل 2: اړخ view of the Leviton LB260-EST Smart Circuit Breaker, illustrating its compact design for seamless integration into the load center.

عملیاتي لارښوونې

لاسي عملیات

  • چالان کول: Push the switch lever to the "ON" position.
  • بندول: Push the switch lever to the "OFF" position.
  • Testing GFPE Function: Press the "TEST" button on the breaker. The breaker should trip to the "OFF" position, indicating the GFPE function is working correctly. Reset by pushing the lever fully to "OFF" then to "ON".

Smart Features (via My Leviton App)

With the My Leviton app and a Whole Home Energy Monitor (LWHEM), you can access advanced features:

  • ریموټ کنټرول: Remotely turn the LB260-EST circuit breaker ON or OFF from anywhere using the My Leviton app.
  • Circuit Scheduling: Set up custom schedules for your circuits based on time and day to optimize energy usage and save power.
  • د انرژۍ څارنه: Gain insightful data on home energy consumption, allowing you to track usage patterns and identify areas for efficiency improvements.
  • Electrical Anomaly Notifications: Receive alerts for unusual electrical activity, enhancing safety and allowing for prompt action.

Video: Leviton Load Center Overview. This video demonstrates the features and benefits of the Leviton Load Center, including the easy installation of smart circuit breakers and smart home integration for energy management.

ساتنه

The Leviton LB260-EST circuit breaker is designed for minimal maintenance. Regular checks can help ensure continued safe operation:

  • Monthly GFPE Test: Press the "TEST" button on the circuit breaker monthly to ensure the Ground Fault Protection of Equipment (GFPE) function is operational. If the breaker does not trip, it should be replaced by a qualified electrician.
  • بصری معاینه: Periodically inspect the circuit breaker for any signs of physical damage, discoloration, or loose connections. If any issues are observed, contact a qualified electrician.
  • پاکول: Keep the circuit breaker and surrounding area clean and free of dust and debris. Use a dry cloth for cleaning; do not use liquids or abrasive cleaners.

د ستونزو حل کول

If you experience issues with your Leviton LB260-EST Smart Circuit Breaker, consider the following:

  • Breaker Trips: If the breaker trips, it indicates a ground fault or an overload condition. Disconnect appliances or devices on the affected circuit and attempt to reset the breaker by pushing the lever fully to "OFF" then to "ON". If it trips again immediately, there may be a persistent fault or overload. Consult a qualified electrician.
  • د سرکټ لپاره بریښنا نشته: Ensure the breaker is in the "ON" position. If it is, check the main service panel for any tripped main breakers. If power is still not restored, contact a qualified electrician.
  • د اپلیکیشن ارتباط مسلې:
    • Ensure your home Wi-Fi network is active and the signal is strong near the Leviton Load Center.
    • Verify that the Whole Home Energy Monitor (LWHEM) is properly installed and connected.
    • Check the My Leviton app for any error messages or updates.
    • Restart your Wi-Fi router and the Whole Home Energy Monitor.
  • ریموټ کنټرول کار نه کوي: Confirm that the circuit breaker is connected to the My Leviton app and your home network. Check for app updates.

For persistent issues, contact Leviton Customer Support or a qualified electrician.

مشخصات

فیچرمشخصات
د ماډل شمیرهLB260-EST
اوسنۍ درجه بندي60 Amps
والیtage120/240-Volt and 120/208-Volt AC
د پولو شمیر2
مداخله درجه بندي10kA
د سرکیټ ماتونکي ډولGFPE (Ground Fault Protection of Equipment, 30 mA)
د نصب کولو ډولSnap-In Mount (Plug-On)
د محصول ابعاد (د x څلویښتم x څلویښتم)۸۳.۸" x ۵۵.۷" x ۴۴.۱"
د توکي وزن۲.۴۵ پونډه
د سمارټ کور مطابقتSmart Home Compatible (requires My Leviton app & LWHEM)

تضمین او ملاتړ

For detailed warranty information, please refer to the official Leviton website or contact Leviton Customer Support. Keep your purchase receipt as proof of purchase.

د لیویټون پیرودونکي ملاتړ:

  • Webسایټ: رسمي لیدنه وکړئ لیویتون webسایټ د محصول ثبتولو، FAQs، او ملاتړ سرچینو لپاره.
  • تلیفون: Refer to the contact information provided on the Leviton website or product packaging for technical assistance.

Always ensure you are consulting official Leviton resources for the most accurate and up-to-date information.

اړوند اسناد - LB260-EST

مخکېview د لیویټون بار مرکز تړلو نصبولو لارښوونې
د لیویټون بار مرکز انکلوژرونو، ماډلونو LP2xx، LP3xx، LP4xx، او LP6xx لپاره د نصب کولو تفصيلي لارښوونې. خوندیتوب، د ناک آوټ لرې کول، نصب کول، تارونه، د څانګې سرکټ بریکر نصب کول، او د پوښ فټینګ پوښي.
مخکېview زما د لیویټون اپلیکیشن لارښود: د ډیکورا سمارټ وای فای او بار مرکزونو سره د سمارټ کور کنټرول
A comprehensive guide to using the My Leviton app for smart home automation, covering Decora Smart Wi-Fi devices and Leviton Load Centers. Learn to set up residences, add devices, create schedules and activities, customize settings, monitor energy usage, and utilize advanced features like smart anomaly detection and visual remote assistance.
مخکېview د لیویټون GFCI ریسیپټیکل نصبولو او ازموینې لارښود
د لیویټون سمارټ لاک پرو GFCI ریسیپټیکل نصب او ازموینې څرنګوالي په اړه یو جامع لارښود، پشمول د تار لارښوونې، د خوندیتوب احتیاطي تدابیر، او د ستونزو حل کولو لارښوونې.
مخکېview د لیویټون بار مرکز مرحلې نقشې نصبولو لارښود
دا لارښود د لیویټون هول هوم انرژی مانیټر (LWHEM) نصبولو ساده کولو لپاره د مرحلې نقشې انځورونه وړاندې کوي. دا توضیح کوي چې چیرې د بریښنا تارونه قطع کړئ او د سمارټ مینز میټرینګ لوازمات CTs نصب کړئ ترڅو د ټول کور انرژي مصرف څارنه وکړئ.
مخکېview د لیویټون VIZIØ6-1L تاپدیپت ډیمر نصبولو لارښوونې
د لیویټون VIZIØ6-1L تاپدیپت ډیمر لپاره جامع نصبولو لارښود، چې د واحد قطب او درې اړخیزه څو اړخیزو ځایونو تنظیمات، د تارونو ډیاګرامونه، عملیات، پرمختللي پروګرام کول، ستونزې حل کول، او د تضمین معلومات پوښي.
مخکېview د لیویټون IP710-LF فلوروسینټ او LED فکسچر سلایډ ډیمر نصبولو لارښود
د لیویټون IP710-LF واحد قطب یا درې لارې فلوروسینټ او LED فکسچر سلایډ ډیمر لپاره د نصبولو جامع لارښوونې. زده کړئ چې څنګه د 0-10V ډیم وړ فکسچرونو لپاره خپل ډیمر په خوندي ډول نصب کړئ، تار کړئ او چل کړئ.