TDR Cable Tester User Manual

پیژندنه

This manual provides detailed instructions for the operation, maintenance, and troubleshooting of the multicomp PRO MP780994 TDR Cable Tester. This handheld device is designed for detecting and diagnosing wiring conditions of twisted pair and coaxial cables, identifying network service issues, and verifying Power over Ethernet (PoE) standards.

The MP780994 is an essential tool for network communication maintenance, engineering, and wiring projects, offering accurate measurements and clear display of wiremap, cable length, and open-circuit locations.

محصول پای ته ورسیدview

Figure 1: The multicomp PRO MP780994 TDR Cable Tester (left) and its accompanying Wire Tracker Receiver (right). The main unit features an LCD display for readings, control buttons for navigation and testing, and a rotary dial. The receiver unit has an NCV sensor, volume control, and LED indicators for wire tracking.

The MP780994 kit includes the main TDR Cable Tester unit and a Wire Tracker Receiver. Key features include:

• TDR supported (no blind area)
• High resolution (about 0.3m)
• Compatibility with various types of cables (CAT 5E, CAT 6, CAT 6A, CAT 8, coaxial)
• د اندازه کولو پراخه لړۍ
• د ننوتلو محافظت
• د اتومات بریښنا بند فعالیت

د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

• 1 x TDR Cable Tester (Main Unit)
• 1 x Wire Tracker Receiver
• بیټرۍ (مخکې نصب شوي یا په جلا توګه شامل دي)
• د کارونکي لارښود (دا لاسوند)

د خوندیتوب معلومات

د وسیلې د ټپي کیدو یا زیان څخه د مخنیوي لپاره تل لاندې خوندیتوب احتیاطي تدابیر په پام کې ونیسئ:

• د وسیلې د خلاصولو یا بدلولو هڅه مه کوئ.
• وسیله د لندبل یا خورا تودوخې سره مه ښکاره کوئ.
• Ensure proper battery installation and disposal.
• Avoid testing live circuits unless specifically designed for such purpose and appropriate safety measures are in place. This device is primarily for unpowered cable testing.

چمتو کول

د بیټرۍ نصب کول

The MP780994 TDR Cable Tester and Wire Tracker Receiver require batteries for operation. Refer to the battery compartment on the back of each unit for correct polarity. Use only the specified battery type.

ابتدايي بریښنا فعاله ده

Press and hold the power button (usually marked with a power symbol) on both the main unit and the receiver to turn them on. The main unit's LCD screen should illuminate.

عملیاتي لارښوونې

Basic Cable Testing (Wiremap)

1. Connect one end of the cable to be tested to the "PORT" input on the main TDR unit.
2. Connect the other end of the cable to the corresponding port on the Wire Tracker Receiver.
3. Select the "TEST" mode on the main unit.
4. The display will show the wiremap, indicating continuity, open circuits, short circuits, split pairs, or miswires.

Cable Length Measurement (TDR)

1. Ensure the cable is disconnected from any network devices.
2. Connect one end of the cable to the "PORT" input on the main TDR unit. Leave the other end open.
3. Select the "SCAN" mode or TDR function.
4. The display will show the cable length in feet or meters. Use the "ft/m" button to toggle units.
5. The TDR function can also locate the distance to faults like open or short circuits.

د PoE کشف

1. Connect the cable from the PoE source to the "POE" input on the main TDR unit.
2. Select the "POE" mode.
3. The display will indicate if PoE is present and identify the PoE standard (802.3AF, 802.3AT, 802.3BT).

Wire Tracking (with Receiver)

1. Connect the cable to be traced to the main TDR unit.
2. Activate the "SCAN" or tone generation function on the main unit.
3. Use the Wire Tracker Receiver to follow the cable path. The receiver will emit an audible tone and/or illuminate LEDs when near the cable carrying the signal.
4. Adjust the sensitivity on the receiver using the rotary dial for optimal tracing.

ساتنه

پاکول

وسیله په نرم، وچ ټوکر سره پاک کړئ. د کثافاتو پاکوونکي یا محلولونه مه کاروئ.

ذخیره کول

وسیله په یخ او وچ ځای کې د مستقیم لمر وړانګو او سختو تودوخې څخه لرې وساتئ. که چیرې د اوږدې مودې لپاره ذخیره کوئ، نو د لیکیدو مخنیوي لپاره بیټرۍ لرې کړئ.

د بیټرۍ بدلول

Replace batteries when the low battery indicator appears on the display. Dispose of old batteries according to local regulations.

د ستونزو حل کول

مشخصات

د تضمین معلومات

For warranty details and terms, please refer to the official multicomp PRO webسایټ ته مراجعه وکړئ یا د دوی د پیرودونکو ملاتړ سره اړیکه ونیسئ. د پیرود ثبوت په توګه د پیرود رسید وساتئ.

ملاتړ

If you encounter any issues or have questions not covered in this manual, please contact multicomp PRO customer support:

• Webسایټ: Visit the multicomp PRO Store on Amazon (د عمومي محصول معلوماتو او د اړیکو اختیارونو لپاره)
• بریښنالیک: د محصول بسته بندۍ یا رسمي ته مراجعه وکړئ webد مستقیم بریښنالیک ملاتړ لپاره سایټ.
• تلیفون: د محصول بسته بندۍ یا رسمي ته مراجعه وکړئ webد تلیفون ملاتړ لپاره سایټ.