SMONET Y1

SMONET Smart Door Lock Keyless Deadbolt Y1 Instruction Manual

موډل: Y1

1. ترتیب کول

1.1 د نصب کولو دمخه چکونه

Before beginning installation, ensure your door meets the required dimensions for the SMONET Smart Door Lock Y1. Refer to the diagram below for detailed measurements.

Door measurement diagram for SMONET Smart Door Lock Y1

انځور 1.1: Door measurement diagram. Ensure hole diameter is 2.13" (54mm), backset is 2.36" or 2.76" (60mm-70mm), minimum distance is 3.9" (100mm), and door thickness is 1.5"-1.89" (38mm-48mm). The lock is compatible with both left-handed and right-handed doors. Single cylinder deadbolts are supported; mortise/integrated locks are not compatible.

Detailed dimensions of SMONET Smart Door Lock Y1 components

انځور 1.2: Detailed dimensions of the SMONET Smart Door Lock Y1 components. The exterior keypad measures 5.12" (130mm) in height and 2.36" (60mm) in width. The interior unit measures 5.91" (150mm) in height and 2.68" (68mm) in width. The latch is adjustable for 2.36" (60mm) or 2.76" (70mm) backsets.

1.2 د بسته محتويات

The SMONET Smart Door Lock Y1 package includes the following components:

Please ensure all components are present before proceeding with installation. Four AA batteries are required and are not included in the package.

1.3 د نصبولو مرحلې

Follow these steps carefully for proper installation. A Phillips head screwdriver is required.

  1. د ډیډبولټ لیچ نصب کړئ:

    Insert the deadbolt latch into the door edge. Ensure the "UP" arrow on the latch is facing upwards. Adjust the backset to either 60mm or 70mm as required by your door. The latch should be in the unlocked (retracted) position during installation. Secure it with the provided screws.

    ویډیو 1.1: Installation guide for the SMONET Smart Deadbolt Door Lock, demonstrating the process of installing the latch and other components. This video is provided by Smonet Tech Shop.

  2. د بهرنۍ کیپډ اسمبلۍ نصب کړئ:

    Route the IC cable from the exterior keypad assembly through the door hole, ensuring the spindle is horizontal. Align the exterior keypad with the deadbolt latch and press it firmly against the door.

  3. د نصب کولو پلیټ نصب کړئ:

    Route the IC cable through the hole on the bottom of the mounting plate. Position the mounting plate over the spindle and secure it to the door with the provided screws. Ensure the cable is not pinched.

  4. Install the Interior Unit Assembly:

    Connect the IC cable from the exterior assembly to the interior unit. Ensure the knob on the interior unit is in the vertical position for right-opening doors or horizontal for left-opening doors. Secure the interior unit to the mounting plate with the provided screws. Do not install batteries until the lock is completely installed and tested.

  5. بیټرۍ داخل کړئ:

    Open the battery cover on the interior unit. Insert four AA batteries, ensuring correct polarity. Close the battery cover.

  6. Set Door Handing:

    The lock needs to know your door's handing (left or right opening). On the interior unit, locate the L/R switch and set it according to your door's opening direction. For right-opening doors, the knob should be vertical. For left-opening doors, the knob should be horizontal.

2. چلول

۵.۱ د خلاصولو طریقې

The SMONET Smart Door Lock Y1 offers multiple convenient ways to unlock your door:

۵.۳ د بندولو طریقې

2.3 Intelligent Management

Manage your lock settings and access permissions through the TTLock app or web پورټل:

Generating a one-time passcode via the SMONET app

انځور 2.5: The SMONET app allows you to generate and send one-time passcodes for temporary access.

Viewing lock activity and user management in the SMONET app

انځور 2.6: The app provides a comprehensive overview of lock activities and user management, allowing you to track who enters and exits.

۵.۲ د سمارټ کور ادغام

With the SMONET G2 Gateway (sold separately), you can integrate your smart lock with popular voice assistants:

SMONET Smart Door Lock Y1 with Alexa and Google Assistant integration

انځور 2.7: The SMONET Smart Door Lock Y1 is compatible with Alexa and Google Assistant for voice control, requiring the G2 Gateway (sold separately).

3. ساتنه

3.1 د بیټرۍ بدلول

The lock requires four AA batteries. When the battery level is low, the lock will provide an audible warning. To replace batteries:

  1. د داخلي واحد څخه د بیټرۍ پوښ لرې کړئ.
  2. زاړه بیټرۍ لرې کړئ.
  3. څلور نوي AA بیټرۍ دننه کړئ، د سم قطبیت ډاډ ترلاسه کړئ.
  4. د بیټرۍ پوښ بدل کړئ.

It is recommended to use high-quality, fresh batteries for optimal performance and battery life.

3.2 پاکول

To maintain the appearance and functionality of your smart lock:

4. ستونزه حل کول

4.1 عام مسایل او حلونه

For further assistance, refer to the detailed troubleshooting section in the included user manual or contact SMONET customer service.

5. مشخصات

فیچرتفصیل
برانډسمونټ
د ماډل نومY1-SNBF-S
د بند ډولبایومیټریک، ډیډ بولټ، کی پیډ
ځانګړي ځانګړتیاوېAlarm, Auto-Lock, Biometric Fingerprint, Fob Unlock, Touchscreen
د توکي ابعاد (L x W x H)6.54 x 2.58 x 1.57 انچه
موادفلزي
وړاندیز شوي استعمالونهدننه، بهر
سټایلد ګوتو نښې مړبولټ
رنګسره زر
د کنټرولر ډولAmazon Alexa (with G2 Gateway)
د کنټرول طریقهاپلیکیشن
د ارتباط پروتوکولبلوتوث
بیټرۍ ته اړتیا دهYes (4x AA, not included)
د پنروک درجهIP63
د عملیاتي حرارت درجه-4 °F څخه تر 158 °F (-20 ° C څخه تر 70 ° C)

6. تضمین او ملاتړ

6.1 د تضمین معلومات

The SMONET Smart Door Lock Y1 comes with a 1-year warranty.

6.2 Customer Service & Technical Support

For any questions regarding installation, app problems, or further information about the G2 gateway, please do not hesitate to seek assistance.

SMONET provides free lifetime technical support and aims to respond to inquiries within 24 hours.

اړوند اسناد - Y1

مخکېview د SMONET سمارټ لاک لارښود: د بریښنایی کیپډ ډیډبولټ نصبولو او عملیاتو لارښود
د SMONET سمارټ لاک لپاره جامع لارښود، د بریښنایی کیپډ ډیډ بولټ لاک. زده کړئ چې څنګه اپلیکیشن نصب کړئ، تنظیم کړئ، چل کړئ، او د خپل بې کیلي ننوتلو سمارټ لاک ستونزې حل کړئ.
مخکېview د SMONET SMUS-GS002 سمارټ لاک لارښود: د نصب او عملیاتو لارښود
د SMONET SMUS-GS002 الکترونیکي کیپډ ډیډبولټ سمارټ لاک لپاره جامع کارونکي لارښود. د نصبولو مرحلې، د عملیاتو لارښوونې، د اپلیکیشن جوړه کول، او د ستونزو حل کول پکې شامل دي.
مخکېview د SMONET AM01 سمارټ لاک لارښود: د کیلي پرته ننوتلو بریښنایی ډیډ بولټ نصب او عملیات
د SMONET AM01 سمارټ لاک لپاره جامع لارښود. د بلوتوث او TTLock ایپ له لارې د دې بریښنایی کیپډ ډیډبولټ لاک نصبولو، چلولو او وصل کولو زده کړئ. ځانګړتیاوې پکې بې کیلي ننوتل، ریموټ کنټرول، او الیکسا ادغام شامل دي.
مخکېview د سمونیټ سمارټ لاک لارښود: د بریښنایی کیپډ ډیډبولټ لاک
د سمونیټ الکترونیکي کیپډ ډیډبولټ سمارټ لاک لپاره جامع لارښود، د محصول مشخصات، د بسته بندۍ مینځپانګې، د فعالیت ځانګړتیاوې، د نصب کولو تفصيلي لارښوونې، د سمارټ ایپ ادغام (TTLock، Alexa)، د ساعت مطابقت، او د عملیاتو لارښوونې په شمول د پاس کوډ مدیریت، د خلاصولو میتودونه، د بیټرۍ حالت، او د ستونزو حل کول پوښي.
مخکېview د سمونیټ سمارټ لاک لارښود: د بریښنایی کیپډ ډیډبولټ لاک
د سمونیټ الکترونیکي کیپډ ډیډبولټ لاک لپاره جامع لارښود، چې نصب، سمارټ ځانګړتیاوې، عملیات، او د ستونزو حل کول پوښي.
مخکېview د SMONET M6-BF سمارټ لاک کارونکي لارښود: نصب، ځانګړتیاوې، او د اپلیکیشن لارښود
د SMONET M6-BF سمارټ لاک لپاره جامع کارونکي لارښود. د سمارټ لایف ایپ نصبولو، تنظیم کولو، کارولو، د الیکسا او ګوګل کور سره مدغم کولو، او د عامو ستونزو حل کولو زده کړئ.