ټول TGSLI201286 900W لیتیم-آیون 12 انچه زنځیر سا د کارونکي لارښود

1. پیژندنه

The Total TGSLI201286 900W Lithium-Ion Chain Saw is a powerful and efficient tool designed for various cutting tasks. This cordless chain saw features a brushless motor, a 12-inch chain bar, and is powered by two 20V 4.0Ah lithium-ion batteries. It includes a quick charger for convenience. Key safety features such as a quick brake function and automatic lubrication are integrated to enhance user protection and tool longevity. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your chain saw.

شکل 1: پایview of the Total TGSLI201286 900W Lithium-Ion 12-Inch Chain Saw.

2. د خوندیتوب لارښوونې

د بریښنا وسیلو د چلولو پرمهال د اور، بریښنا شاک او شخصي ټپي کیدو خطر کمولو لپاره تل د خوندیتوب اساسي احتیاطي تدابیر په پام کې ونیسئ. د کارولو دمخه ټولې لارښوونې ولولئ او پوه شئ.

• شخصي محافظتي تجهیزات (PPE): Always wear safety glasses, hearing protection, gloves, and sturdy footwear. A hard hat and leg protection are also recommended.
• د کاري ساحې خوندیتوب: Keep the work area clean and well-lit. Do not operate the chain saw in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• بریښنایی خوندیتوب: د بدن د خاورو یا ځمکنیو سطحو سره د تماس څخه ډډه وکړئ. د بریښنا وسایل باران یا لوند شرایطو ته مه ښکاره کوئ.
• Chain Saw Grip: Always hold the chain saw firmly with both hands when operating. Ensure a secure grip on both the front handle and the rear handle.
• د کک بیک مخنیوی: Be aware of the risk of kickback. Avoid the guide bar tip contacting any object. Use caution when re-entering a cut.
• د بیټرۍ خوندیتوب: Use only the specified battery packs and charger. Do not short-circuit, disassemble, or expose batteries to high temperatures or fire.
• ساتنه: Disconnect the battery pack before making any adjustments, changing accessories, or storing the chain saw.
• ماشومان او نندارچیان: ماشومان او لیدونکي د کار له ساحې څخه په خوندي واټن کې وساتئ.

۳. اجزا او ځانګړتیاوې

The Total TGSLI201286 chain saw is equipped with several features designed for performance and safety.

• بې برخی موټر: Provides improved performance, efficiency, and extended tool life compared to brushed motors.
• 12-Inch Chain Bar and Chain: A robust cutting system suitable for various tree maintenance and wood cutting tasks.
• 20V 4.0Ah Lithium-Ion Batteries (x2): Two high-capacity batteries provide extended runtime and consistent power.
• چټک چارجر: Designed to rapidly charge the lithium-ion batteries, minimizing downtime.
• Quick Brake Function: Enhances safety by rapidly stopping the chain in the event of kickback or when the trigger is released.
• د اتوماتیک غوړولو سیسټم: Ensures continuous lubrication of the chain and guide bar during operation, reducing wear and friction.
• ارګونومیک ډیزاین: Features comfortable handles for improved control and reduced operator fatigue.

4. ترتیب کول

4.1 د بیټرۍ چارج کول

Before first use, fully charge both 20V 4.0Ah lithium-ion batteries using the provided quick charger.

1. د بیټرۍ کڅوړه چارجر ته دننه کړئ. ډاډ ترلاسه کړئ چې دا په خپل ځای کې کلیک کوي.
2. Plug the charger into a standard 220-240V/50/60Hz power outlet.
3. The charger indicator light will show the charging status. Refer to the charger manual for specific light patterns.
4. کله چې په بشپړه توګه چارج شي، د بیټرۍ پیک له چارجر څخه لرې کړئ.

Figure 2: The 20V 4.0Ah Lithium-Ion batteries and quick charger included with the chain saw.

4.2 Installing the Guide Bar and Chain

Ensure the battery is removed before performing any assembly.

1. Remove the chain cover by loosening the retaining nuts.
2. Place the chain around the drive sprocket and then guide it into the groove of the guide bar. Ensure the cutting edges of the chain are facing the correct direction (refer to the arrow on the chain or guide bar).
3. د لارښود بار سټډونه د لارښود بار په سوریو کې ځای په ځای کړئ.
4. Replace the chain cover and hand-tighten the retaining nuts. Do not fully tighten yet.

3 شکل: تړل view of the 12-inch guide bar and chain assembly.

۳.۲ د زنځیر فشار تنظیمول

Correct chain tension is crucial for safe and efficient operation.

1. With the chain cover retaining nuts slightly loose, use the chain tensioning screw (often a red dial or screw on the side) to adjust the chain tension.
2. زنځیر باید د لارښود بار سره کلک وي، مګر بیا هم د لاس په واسطه په آزاده توګه ایستل کیدی شي. د لارښود بار په لاندې برخه کې باید هیڅ ډول ساګ نه وي.
3. Once the tension is correct, fully tighten the chain cover retaining nuts.

Figure 4: Detail of the chain tension adjustment mechanism on the chain saw.

۳.۲ د زنځیر د تیلو زیرمه ډکول

The automatic lubrication system requires chain oil for proper function.

1. Locate the oil filler cap on the chain saw body.
2. Unscrew the cap and fill the reservoir with appropriate chain and bar oil. Do not use motor oil or waste oil.
3. کیپ په خوندي ډول بدل کړئ.

5. عملیاتي لارښوونې

۶.۷ د عملیاتو دمخه چک لیست

• ډاډ ترلاسه کړئ چې ټول خوندیتوب وسایل اغوستل شوي دي.
• د زنځیر فشار وګورئ.
• Verify chain oil reservoir is full.
• Inspect the chain for sharpness and damage.
• ډاډ ترلاسه کړئ چې د کار ساحه د خنډونو او لیدونکو څخه پاکه ده.
• Insert a fully charged battery pack into the chain saw.

5.2 Starting the Chain Saw

1. زنځیر د دواړو لاسونو سره په ټینګه ونیسئ.
2. Engage the safety lock-off button (if present).
3. Press the trigger switch to start the motor. The chain will begin to move.

5.3 Cutting Techniques (Basic)

• توازن ساتل: Always stand with a firm footing and maintain good balance.
• تصفیه: Ensure the area around the cutting path is clear.
• د پرې کولو زاویه: Approach the material at an appropriate angle, allowing the chain to do the work. Do not force the saw.
• له کک بیک څخه ډډه وکړئ: Be extremely cautious of the guide bar tip. Never cut with the tip of the guide bar.
• پړسوب: When limbing, work from the bottom up to avoid pinching the guide bar.

5.4 Stopping the Chain Saw

Release the trigger switch. The quick brake function will rapidly stop the chain. For extended breaks or when moving between work areas, remove the battery pack.

6. ساتنه

Regular maintenance ensures the longevity and safe operation of your chain saw. Always remove the battery pack before performing any maintenance.

6.1 Cleaning the Chain Saw

• After each use, clean sawdust, chips, and debris from the chain saw body, guide bar, and chain.
• Use a brush or compressed air. Avoid using water directly on electrical components.

۵.۲ د زنځیر تیزول

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or replace it when dull or damaged. Refer to the chain manufacturer's instructions for proper sharpening techniques and file اندازه

۶.۲ د لارښود بار ساتنه

• د لارښود بار نالی پاک کړئ ترڅو د چرسو او کثافاتو څخه پاک شي.
• د لارښود بار په دوره یي ډول واړوئ ترڅو ډاډ ترلاسه شي چې دا یوشان اغوستل کیږي.
• د لارښود بار د ټپونو یا زیان لپاره وګورئ. File هر ډول burrs ښکته کړئ.

۵.۳ د بیټرۍ پاملرنه او ذخیره کول

• بیټرۍ په یخ او وچ ځای کې د مستقیم لمر وړانګو او خورا تودوخې څخه لرې وساتئ.
• په بشپړه توګه چارج شوي بیټرۍ د اوږدې مودې لپاره مه ساتئ. په دوره یي ډول یې چارج کړئ.
• Remove batteries from the chain saw when not in use.

6.5 Chain Oil Management

Regularly check the chain oil level and refill as needed. Use only recommended chain and bar oil.

7. ستونزه حل کول

This section addresses common issues you might encounter with your chain saw.

8. مشخصات

Technical specifications for the Total TGSLI201286 900W Lithium-Ion Chain Saw.

9. تضمین او ملاتړ

For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, spare parts, or service inquiries, please contact Total Inc. customer service through their official webسایټ یا ستاسو د محصول په بسته بندۍ کې چمتو شوي د اړیکو توضیحات.