Proster 2-in-1 Moisture Meter (Model PST243-US) Instruction Manual

پیژندنه

This manual provides comprehensive instructions for the safe and effective use of your Proster 2-in-1 Moisture Meter. This device is designed to accurately measure moisture content in various materials, including wood and building materials, using both pin and pinless measurement modes. It also features ambient temperature measurement and an LCD backlight for clear readings.

د خوندیتوب معلومات

• تل په احتیاط سره وسیله اداره کړئ.
• Keep the device away from water and high humidity environments to prevent damage.
• د وسیلې د جلا کولو یا ترمیم کولو هڅه مه کوئ. ترمیم باید یوازې د وړ پرسونل لخوا ترسره شي.
• When using the pin mode, be cautious of the sharp pins to avoid injury. Keep the protective cap on when not in use.
• د ځایی مقرراتو سره سم د بیټرۍ تصفیه کول.

د محصول ځانګړتیاوې

• د اندازه کولو دوه ګونی طریقې: Offers both pin and pinless (non-invasive) measurement for versatility. The pinless mode prevents damage to surfaces, ideal for finished wood and delicate materials. The pin mode provides faster response and higher accuracy for various wood types and building materials.
• لوړ دقت:
  • Pin Mode: Wood moisture 6-60% (±2% accuracy); Building materials 0-33% (±2% accuracy).
  • Pinless Mode: Wood moisture 0-60% (±4% accuracy); Building materials 0-33% (relative readings).
• د محیطي تودوخې اندازه کول: Measures ambient temperature from 0°C to 40°C (32°F to 104°F) with an accuracy of ±2°C/±4°F.
• روښانه لوستل: Features a color backlit LCD display, data hold function, and a signal bar display for easy interpretation of results.
• پراخه غوښتنلیک: Suitable for measuring moisture in wood, concrete, cement, plaster, and other building materials.
• اتوماتیک بریښنا بند: The device automatically shuts off after 5 minutes of inactivity to conserve battery life.

د بسته محتويات

Verify that all items listed below are present and in good condition upon opening the package.

Image: Contents of the Proster 2-in-1 Moisture Meter package, showing the meter, a 9V battery, a black carrying pouch, and the user manual.

• Proster 2-in-1 Moisture Meter (Model PST243-US)
• 9V بیټرۍ
• Protective Cap for Pins
• د بار وړلو کڅوړه
• د کارن لارښود

چمتو کول

د بیټرۍ نصب کول

1. د آلې په شا کې د بیټرۍ کڅوړه ومومئ.
2. سلایډ د بیټرۍ خونې پوښ خلاص کړئ.
3. شامل شوی 9V بیټرۍ دننه کړئ، د سم قطبیت ډاډ ترلاسه کړئ (+/-).
4. د بیټرۍ کمپارټ پوښ په خوندي ډول وتړئ.

انځور: تفصیلي view of the moisture meter, highlighting the protective cap, pins, pinless sensor, and battery case.

عملیاتي لارښوونې

پاور آن/بند

فشار ورکړئ Power On/Off / Wood Density Button (labeled with a power symbol and "DENSITY") to turn the device on or off.

Selecting Measurement Mode (Pin / Pinless)

The meter offers two measurement modes: Pin Measurement Mode and Pinless Measurement Mode.

Image: The moisture meter demonstrating its two measurement modes: Pin Measurement Mode (top) for direct contact and Pinless Measurement Mode (bottom) for non-invasive scanning.

1. فشار ورکړئ Pin/Pinless Mode Switch Button (labeled "MODE") to toggle between the two modes.
2. In Pin Measurement Mode, remove the protective cap and gently insert the pins into the material to be measured.
3. In Pinless Measurement Mode, place the back of the device (where the pinless sensor is located) flat against the surface of the material.

Selecting Material Type (Wood / Building Material)

فشار ورکړئ Wood/Building Material Switch Button (labeled "BLD") to select between wood and building material measurement. The display will indicate the selected material type.

Image: The moisture meter displaying measurements for wood (left) and building material (right), showing the different measurement ranges and accuracies for each.

Wood Density Grades

The meter supports 9 different wood density grades for more accurate wood moisture measurements. Press the Wood Density Button (same as Power On/Off button) to cycle through the density grades.

Temperature Measurement (°C / °F)

The device measures ambient temperature. Press the Data Hold and °C/°F Switch Button (labeled "HOLD °C/°F") to switch between Celsius and Fahrenheit units for temperature display.

د ډاټا نیول فنکشن

په ښودنه کې د اوسني اندازه کولو د کنګل کولو لپاره، فشار ورکړئ Data Hold and °C/°F Switch Button (labeled "HOLD °C/°F"). Press it again to release the hold function.

د بزګر الارم

The device features an audible buzzer alarm to indicate high moisture levels.

Image: The moisture meter indicating a buzzer alarm when moisture measurements exceed 20% in building material mode (left) and 16% in wood mode (right).

• In Building Material Mode, the alarm sounds when measurements exceed 20%.
• In Wood Mode, the alarm sounds when measurements exceed 16%.

د اندازه کولو حدود او دقت

ساتنه

• پاکول: وسیله په نرم، وچ ټوکر سره پاک کړئ. د کثافاتو پاکوونکي یا محلولونه مه کاروئ.
• ذخیره کول: When not in use for extended periods, remove the battery to prevent leakage. Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the protective cap is on the pins.
• د بیټرۍ بدلول: کله چې د ټیټ بیټرۍ شاخص په ډسپلې کې څرګند شي نو د 9V بیټرۍ بدله کړئ.

د ستونزو حل کول

وسیله نه فعالیږي:

Check if the 9V battery is installed correctly with the correct polarity. Ensure the battery has sufficient charge. Replace the battery if necessary.

ناسم لوستل:

Ensure the correct measurement mode (pin or pinless) and material type (wood or building material) are selected. For wood, verify the correct density grade is set. Ensure good contact with the material surface, especially in pinless mode.

ښودنه تیاره یا د لوستلو وړ نه ده:

The battery might be low. Replace the 9V battery. Ensure the backlight is enabled if available.

مشخصات

تضمین او ملاتړ

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official Proster webسایټ. د هر ډول تضمین ادعا لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.