۱.۱. د خوندیتوب مهم معلومات
د نصبولو او کارولو دمخه ټولې لارښوونې په دقت سره ولولئ. د دې لارښوونو په تعقیب کې پاتې راتلل ممکن د ټپي کیدو یا محصول زیان لامل شي.
- Always ensure the mounting surface is structurally sound. For drywall installations, solid wood blocking is required to provide a secure mounting surface for the track.
- د نصبولو پرمهال مناسب وسایل او خوندیتوب وسایل وکاروئ.
- This barn door is heavy. Two people are recommended for safe handling and installation.
- Ensure all hardware is securely fastened before operating the door.
- ماشومان او څاروي د نصب کولو ساحې څخه لرې وساتئ.
2. د بسته محتويات
Verify that all components listed below are present and undamaged before beginning installation.
Figure 2.1: Included components for the JUBEST barn door kit.
- Door Panel (36" W x 84" H)
- Sliding Track (72" length)
- Roller Hangers (2 units)
- د دروازې لاسي
- Floor Guides (2 types available)
- Anti-jump Disks
- د دروازې بندونکي
- Wall Spacers
- Fasteners and Wrenches
3. د محصول مشخصات
| د ماډل شمیره | OJC101-YGD01 |
| د دروازې پینل ابعاد | ۱۴.۲۵" واټ x ۹.۳" واټ |
| د دروازې ضخامت | ۲۸ ۷/۸" |
| د تعقیب اوږدوالی | 72" |
| مواد | Solid Wood, MDF, PVC Covered (Door Panel); Carbon Steel (Hardware) |
| رنګ | تور |
| د توکي وزن | ۲.۴۵ پونډه |
| د محصول ابعاد (په ټولیز ډول) | 84 x 12 x 3 انچه |
Figure 3.1: Detailed dimensions of the barn door and hardware.
4. د نصبولو لارښوونې
The JUBEST barn door kit is designed for straightforward installation. Follow these steps carefully for optimal performance and safety.
شکل 4.1: پایview of the easy installation process.
- Step 1: Prepare the Wall and Mount the Track
Identify stud locations. If installing into drywall, install a solid wood blocking board (not included) across the opening to provide a secure mounting surface for the track. Attach the carbon steel sliding track to the wall using the provided fasteners. Ensure the track is level and securely anchored.
- څلورم ګام: د دروازې تخته راټول کړئ
Assemble the door panel components according to the detailed instructions provided in the physical manual. The wave-shape panels are designed for easy assembly.
- Step 3: Attach Rollers and Handle to Door
Securely attach the roller hangers to the top edge of the assembled door panel. Install the door handle on the desired side of the door.
- Step 4: Hang the Door and Install Floor Guides
Carefully lift the door panel and hang the rollers onto the mounted track. Install the floor guides at the bottom of the door opening to prevent the door from swinging. Adjust door stoppers on the track to control the door's travel distance.
For detailed step-by-step instructions, refer to the included paper manual.
5. عملیات
The JUBEST barn door is designed for smooth and quiet operation. To open or close the door, gently slide it along the track using the handle. The carbon steel hardware ensures a fluid motion.
Figure 5.1: The JUBEST barn door in an open position, demonstrating its sliding functionality.
Ensure the path of the door is clear of obstructions before sliding. The door stoppers on the track will prevent the door from sliding too far.
6. ساتنه
Regular maintenance will help preserve the appearance and functionality of your barn door.
- پاکول: The PVC-covered surface of the door panel is waterproof and easy to clean. Use a soft, damp cloth to wipe down the door and hardware. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- د هارډویر معاینه: Periodically inspect all screws and fasteners on the track and rollers to ensure they remain tight. Tighten any loose components to maintain smooth operation and safety.
- د ټریک غوړول: If the door's movement becomes less smooth over time, a small amount of silicone-based lubricant can be applied to the track and roller wheels.
Figure 6.1: The PVC surface allows for easy cleaning with a damp ټوکر
7. ستونزه حل کول
If you encounter any issues with your JUBEST barn door, refer to the following common problems and solutions:
- دروازه په اسانۍ سره نه ښویېږي:
- Check if the track is level. Adjust if necessary.
- Inspect the rollers for any debris or damage. Clean or replace if needed.
- Ensure all track fasteners are tight.
- Apply a silicone-based lubricant to the track and rollers.
- Door is difficult to move:
- Verify that the floor guides are properly aligned and not causing friction.
- Ensure there are no obstructions in the door's path.
- Door swings away from the wall:
- Confirm that the floor guides are correctly installed and adjusted.
۷. تضمین او د پیرودونکو ملاتړ
JUBEST is committed to providing high-quality products and excellent customer service.
- For any quality problems, missing parts, or installation issues, please contact our professional customer service team.
- Our customer service team is available to assist you. Refer to your purchase documentation for contact details.





