فانټیکس ایکس ټي View د میډ ټاور لوبو چیسس لارښود لارښود

1. پیژندنه

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

کلیدي ځانګړتیاوې:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. د بسته محتويات

ډاډ ترلاسه کړئ چې ټولې برخې په بسته کې شتون لري:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • زپ اړیکې (30x)
  • MB/SSD Screws (30x)
  • د ګوتو پیچونه (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. ترتیب او نصب کول

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View چیسس.

۳. د چیسس چمتو کول

1. خلاص کړئ: چیسس په احتیاط سره د هغې له بسته بندۍ څخه لرې کړئ.
2. پینلونه لرې کړئ: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

انځور ۳.۱: داخلي برخه view of the XT View chassis, ready for component installation.

3.2. د مور بورډ نصب کول

1. سټینډفونه نصب کړئ: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. د مور بورډ ځای: Carefully align your motherboard with the standoffs and I/O shield opening.
3. خوندي مور بورډ: Use the provided MB screws to secure the motherboard to the chassis.

۳. د بریښنا رسولو واحد (PSU) نصب کول

1. د PSU موقعیت: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. خوندي PSU: Fasten the PSU to the chassis using the provided PSU screws.

۴. د ذخیره کولو ډرایو نصب کول

The chassis supports 3.5" HDDs and 2.5" SSDs.

• ۳.۵ انچه هارډ ډرایو: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• ۲.۵ انچه ایس ایس ډي: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. Expansion Card (GPU) Installation

1. د سلاټ پوښونه لرې کړئ: Remove the necessary expansion slot covers from the rear of the chassis.
2. کارت داخل کړئ: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. خوندي کارت: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

انځور ۴.۳: د شا داخلي برخه view highlighting expansion slots and fan mounting points.

3.6. د فین او ریډیټر نصب کول

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. د کیبل مدیریت

د کیبلونو تنظیم کولو لپاره د مدر بورډ ټری شاته د کیبل روټینګ چینلونو او ټای ډاون نقطو څخه کار واخلئ. دا د هوا جریان او جمالیات ښه کوي.

انځور 3.3: شاته view illustrating cable management space.

3.8. مخکینۍ I/O ارتباطات

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• د USB 3.0 سرۍ
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. عملیاتي لارښوونې

4.1. بریښنا فعال/بند

فشار ورکړئ د بریښنا تڼۍ located on the top front panel to turn the system on or off.

4.2. Front Panel Connectivity

د مخکینۍ I/O پینل لاندې برخو ته اسانه لاسرسی چمتو کوي:

• 1x USB 3.0 بندر
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. ساتنه

۱. د دوړو فلټرونه پاکول

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. فلټرونه لرې کړئ: Gently slide out or unclip the dust filters.
2. پاکول: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. بیا لګول: Place the clean, dry filters back into their positions.

5.2. عمومي پاکول

For external surfaces, use a soft, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. ستونزه حل کول

دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو ورسره مخ کیدی شئ.

۶.۱. سیسټم نه چالانېږي

• د بریښنا اړیکې: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• د مور بورډ اړیکې: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• د مخکینۍ پینل سرلیک: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• د مور بورډ ترکیب: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• د تڼۍ فعالیت: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• اړیکې: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• خنډونه: Check for any cables or objects obstructing fan blades.
• دوړې: Clean any dust buildup on fan blades.

7. مشخصات

8. ملاتړ او تضمین

For additional information, technical support, or warranty inquiries, please visit the official Phanteks webسایټ:

www.phanteks.com

Refer to the Phanteks webستاسو په سیمه کې د پلي کیدو وړ ترټولو اوسني تضمین شرایطو او شرایطو لپاره سایټ.