Dyeetic D15

د ډایټیک موټر جمپ سټارټر کارونکي لارښود

ماډل: D15

Brand: Dyeetic

1. پیژندنه

This user manual provides essential information for the safe and effective operation of your Dyeetic 4000A Peak Car Lithium Battery Jump Starter. Please read this manual thoroughly before use and retain it for future reference.

The Dyeetic D15 is a versatile device designed to jump start vehicles with up to 10.0L gas or 8.0L diesel engines. It also functions as a portable power bank and an emergency LED light.

2. د بسته محتويات

ډاډ ترلاسه کړئ چې لاندې ټول توکي ستاسو په بسته کې شامل دي:

Dyeetic D15 Jump Starter with jumper cables and carrying case

Image: The Dyeetic D15 Jump Starter unit, smart jumper cables, and portable storage bag.

3. کلیدي ځانګړتیاوې

Dyeetic D15 Jump Starter showing the force start button on the smart clamp.

Image: The smart clamp with the "BOOST" button for force starting.

Dyeetic D15 Jump Starter charging multiple devices via USB ports.

Image: The D15 unit acting as a 21800mAh power supply, charging various electronic devices.

Dyeetic D15 Jump Starter showing the 500 lumen emergency light with flashlight, strobe, and SOS modes.

Image: The integrated 500 lumen emergency LED light, useful for night repairs, journeys, and camping.

4. مشخصات

ستونزهاحتمالي لاملد حل لاره
واحد نه خلاصیږي.بیټرۍ په بشپړه توګه خالي شوې ده.Charge the unit fully using the provided USB-C cable.
موټر نه پیل کیږي.غلط clamp connection; vehicle battery is completely dead; jump starter battery is low.کل ډاډ ترلاسه کړئamps are connected to correct terminals (red to positive, black to negative). If battery is completely dead, use the "BOOST" function. Recharge the jump starter if its charge is low.
سمارټ کلamp indicator light is red/flashing.Incorrect connection, short circuit, or battery voltage ډیر ټیټ.Check connections. If battery is completely dead, press the "BOOST" button until the light turns solid green.
Unit gets warm during use.Normal operation during high current discharge.This is normal. If it becomes excessively hot, disconnect and allow to cool. The unit has over-temperature protection.
Dyeetic D15 Jump Starter showing detailed specifications of ports and buttons.

انځور: تفصیلي view of the D15 unit's ports, buttons, and LCD screen.

۴. تنظیم او ابتدايي چارج

۵.۱ د جمپ سټارټر چارج کول

Before first use, fully charge the Dyeetic D15 unit. Use the provided USB-C charging cable and a compatible USB wall adapter (not included).

  1. Connect the USB-C cable to the "USB-C IN" port on the jump starter.
  2. Connect the other end of the USB-C cable to a USB wall adapter.
  3. The LCD screen will display the charging percentage. Charge until it reaches 100%.

It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, even if not in use.

5.2 Connecting Jumper Cables

The smart jumper cables are designed for safe and easy connection. Ensure the jump starter unit is turned off before connecting the cables.

  1. Locate the "ENGINE START" port on the jump starter unit.
  2. Insert the blue plug of the smart jumper cables firmly into the "ENGINE START" port.
  3. ډاډ ترلاسه کړئ چې پیوستون خوندي دی.
Dyeetic D15 Jump Starter with heavy-duty smart clamps and safety shield icon.

Image: The heavy-duty smart clamps, designed for comprehensive safety protection.

۶. د عملیاتو لارښوونې: د موټر چلول پیل کړئ

لومړی خوندیتوب: Always ensure proper polarity connection. The smart clamps have built-in protections to prevent damage from incorrect connections.

  1. موټر چمتو کړئ: Turn off the vehicle's ignition and all accessories (lights, radio, A/C). Engage the parking brake.
  2. Cl وصل کړئamps:
    • سره وصل کړئ red (positive +) clamp د موټر د بیټرۍ مثبت ترمینل ته.
    • سره وصل کړئ black (negative -) clamp د موټر د بیټرۍ منفي ټرمینل ته.

    د سمارټ clamp indicator light will flash red and green until a correct connection is made. Once connected correctly, it will show a solid green light.

  3. موټر پیل کړئ:
    • که هوښیار کلamp shows a solid green light, proceed to start your vehicle.
    • For completely dead batteries: که هوښیار کلamp light is red or flashing, press and hold the "BOOST" button on the smart clamp for approximately 3 seconds until the green light turns solid. This unlocks the force start function.

    Attempt to start the vehicle. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.

  4. Cl منحل کړئamps: Once the vehicle starts, immediately disconnect the black (negative -) clamp first, then the red (positive +) clamp. Disconnect the smart cables from the jump starter unit.

Video: Demonstration of connecting the Dyeetic D15 Jump Starter to a car battery and successfully jump-starting the vehicle.

7. ساتنه او ذخیره کول

8. ستونزه حل کول

ستونزهاحتمالي لاملد حل لاره
واحد نه خلاصیږي.بیټرۍ په بشپړه توګه خالي شوې ده.Charge the unit fully using the provided USB-C cable.
موټر نه پیل کیږي.غلط clamp connection; vehicle battery is completely dead; jump starter battery is low.کل ډاډ ترلاسه کړئamps are connected to correct terminals (red to positive, black to negative). If battery is completely dead, use the "BOOST" function. Recharge the jump starter if its charge is low.
سمارټ کلamp indicator light is red/flashing.Incorrect connection, short circuit, or battery voltage ډیر ټیټ.Check connections. If battery is completely dead, press the "BOOST" button until the light turns solid green.
Unit gets warm during use.Normal operation during high current discharge.This is normal. If it becomes excessively hot, disconnect and allow to cool. The unit has over-temperature protection.

9. تضمین او ملاتړ

Dyeetic is committed to providing reliable and high-quality products. Your Dyeetic D15 Jump Starter comes with comprehensive support.

اړوند اسناد - D15

مخکېview د ډایټیک D16 موټر جمپ سټارټر کارونکي لارښود
د ډایټیک D16 موټر جمپ سټارټر لپاره د کارونکي لارښود، چې د هغې ځانګړتیاوې، مشخصات، عملیات، ساتنه، ستونزې حل کول، او د تضمین معلومات په تفصیل سره بیانوي. د وسیلو چارج کولو، د LED فلش لائټ کارولو، او د موټر جمپ سټارټ کولو لارښوونې پکې شاملې دي.
مخکېview د ډایټیک D15 موټر جمپ سټارټر کارونکي لارښود
د ډایټیک D15 موټر جمپ سټارټر لپاره د کارونکي لارښود، د محصول مشخصات، د عملیاتو لارښود، د چارج کولو لارښوونې، د ستونزو حل کول، او د تضمین معلومات په تفصیل سره بیانوي.
مخکېview د FSP D15-(2)DA4 لړۍ 15W DC-DC کنورټر ډیټاشیټ
د FSP D15-(2)DA4 لړۍ 15W DC-DC کنورټر لپاره تفصيلي ډیټاشیټ. ځانګړتیاوې پکې شاملې دي 4:1 پراخه ان پټ رینج، 1x1" بسته، تر 90٪ پورې لوړ موثریت، او د عملیاتي تودوخې پراخه رینج (-40°C څخه تر +105°C پورې). بریښنایی مشخصات، د خوندیتوب تصویبونه، میخانیکي ابعاد، او د غوښتنلیک یادښتونه.
مخکېview د MOBOTIX D15 ډبل ډوم کیمرې لارښود - د لوړ ریزولوشن ډبل لینز امنیت
د MOBOTIX D15 DualDome کیمرې لارښود وپلټئ، چې د هغې دوه ګونی 6MP/5MP HiRes سینسرونه، دوه ګونی ساحه څارنه، قوي ډیزاین، او د مسلکي امنیتي غوښتنلیکونو لپاره پرمختللي ځانګړتیاوې په تفصیل سره بیانوي. د نصبولو، عملیاتو، او تخنیکي مشخصاتو په اړه زده کړه وکړئ.