BBURAGO Ferrari SF90 Stradale 1:24 Scale Model Kit Instruction Manual

پیژندنه

Thank you for choosing the BBURAGO Ferrari SF90 Stradale 1:24 Scale Model Kit. This kit allows you to construct a detailed replica of the iconic Ferrari SF90 Stradale supercar. Designed for enthusiasts and collectors, this model provides an engaging assembly experience and results in a high-quality display piece. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building process.

د خوندیتوب معلومات

• وړاندیز شوی عمر: This model kit is recommended for individuals 14 years and older. It contains small parts that may pose a choking hazard for younger children.
• کوچنۍ برخې: Keep all small components out of reach of children and pets.
• تیزې څنډې: Some parts may have sharp edges. Handle with care during assembly.
• Adhesives/Paints: If using additional adhesives or paints (not included), ensure proper ventilation and follow the manufacturer's safety instructions for those products.

د بسته محتويات

Before starting, verify that all components are present. The kit should contain:

• Pre-painted die-cast metal body shell
• Plastic parts sprues (e.g., interior, chassis, wheels, engine details)
• د ربړ ټایرونه
• Screws and/or small pins for assembly
• Decal sheet (if applicable)
• Instruction sheet/diagrams

If any parts are missing or damaged, please contact BBURAGO customer support.

Assembly (Setup)

Follow these general steps for assembling your Ferrari SF90 Stradale model kit. Refer to the included diagrams for specific part identification and placement.

1. چمتووالی: Unpack all components carefully. Identify each part by comparing it with the parts list or diagrams. Prepare a clean, well-lit workspace.
2. د چیسس مجلس: Begin by attaching the main chassis components. This typically involves securing the base plate, axles, and suspension parts.
3. داخلي مجلس: Assemble the interior components such as seats, dashboard, steering wheel, and any other cockpit details. Secure them to the interior tub.
4. د څرخ مجلس: Mount the rubber tires onto the plastic wheel rims. Attach the assembled wheels to the axles on the chassis.
5. Engine/Underbody Details: If your kit includes engine or underbody details, assemble and attach them according to the instructions.
6. د بدن ضمیمه: Carefully align the assembled interior and chassis with the pre-painted die-cast body shell. Secure the body to the chassis using the provided screws or clips.
7. بهرنۍ توضیحات: Attach smaller exterior components such as mirrors, headlights, taillights, spoilers, and any other trim pieces.
8. Decal Application (if applicable): If your kit includes decals, carefully cut them out, soak them in water, and slide them onto the designated areas of the model. Gently blot excess water and allow them to dry completely.
9. وروستۍ معاینه: Review your assembled model to ensure all parts are securely attached and correctly aligned.

Image: The fully assembled BBURAGO Ferrari SF90 Stradale 1:24 scale model kit, showcasing its detailed replica features.

Display and Handling (Operating)

• د ښودلو ځای: Place your finished model on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity to prevent damage or fading.
• سمبالول: Always handle the model by its main body or chassis. Avoid touching delicate parts like mirrors, antennas, or spoilers, as they can break easily.
• د لوبو نه: This is a collector's model, not intended for rough play. Repeated handling or impact can cause parts to detach or break.

ساتنه

• پاکول: To clean your model, gently dust it with a soft, dry brush or a microfiber cloth. For stubborn dust, a slightly damp cloth can be used, but avoid excessive moisture, especially on decals.
• د کیمیاوي موادو څخه ډډه وکړئ: Do not use harsh chemical cleaners, solvents, or abrasive materials, as these can damage the paint finish or plastic components.
• ذخیره کول: If storing the model, place it in a protective display case or box to prevent dust accumulation and accidental damage.

د ستونزو حل کول

• هغه برخې چې مناسب ندي: If a part does not fit easily, do not force it. Double-check the instruction diagrams to ensure you have the correct part and orientation. Minor trimming with a hobby knife may be necessary for some plastic parts.
• Decals Not Adhering: Ensure the surface is clean and dry. Use a decal setting solution if available, or gently press the decal with a soft cloth to remove air bubbles and ensure full contact.
• خلاصې برخې: If parts become loose after assembly, a small amount of model-specific adhesive can be used to re-secure them.

مشخصات

تضمین او ملاتړ

For information regarding warranty, replacement parts, or technical support, please refer to the contact information provided on the product packaging or visit the official BBURAGO webسایټ. د هر ډول تضمین ادعا لپاره د پیرود ثبوت وساتئ.