پیژندنه
This manual provides comprehensive instructions for the setup, operation, and maintenance of your HyperX Cloud III Wireless Gaming Headset and HyperX QuadCast S RGB USB Condenser Microphone. This bundle is designed to provide a superior audio experience for gaming, streaming, and communication across various platforms.
Image: The HyperX Cloud III Wireless Headset and HyperX QuadCast S Microphone, shown together as a complete bundle.
د بسته محتويات
- HyperX Cloud III Wireless Gaming Headset
- Detachable Microphone for Cloud III
- د USB بې سیم Dongle
- د USB-C چارج کیبل
- HyperX QuadCast S RGB USB Condenser Microphone
- USB Cable for QuadCast S
- Mount Adapter for QuadCast S (3/8” and 5/8” thread sizes)
- د چټک پیل لارښود (دا لارښود)
چمتو کول
HyperX Cloud III Wireless Headset Setup
- د هیډسیټ چارج کول: Connect the USB-C charging cable to the headset's charging port and to a powered USB port. The LED indicator will show charging status. A full charge takes approximately 4.5 hours.
- د آلې سره نښلول:
- Insert the USB wireless dongle into an available USB port on your PC, PS5, PS4, or Nintendo Switch.
- Power on the headset by pressing and holding the power button. The headset will automatically connect to the dongle.
- For mobile devices, ensure your device supports USB-C audio output or use an appropriate adapter if needed.
- د مایکروفون ضمیمه کول: Insert the detachable 10mm microphone into the microphone jack on the headset. Ensure it is securely seated.
انځور: نږدې انځور view of the HyperX Cloud III Wireless Headset, highlighting the earcups and the detachable microphone.
HyperX QuadCast S Microphone Setup
- ځای په ځای کول: Place the QuadCast S microphone on a stable, flat surface using its integrated stand, or attach it to a compatible boom arm using the included mount adapter.
- د آلې سره نښلول: Connect the USB cable from the QuadCast S microphone to an available USB port on your PC, PS4, PS5, or Mac. The microphone will be automatically recognized by most operating systems.
- د سافټویر نصب کول (اختیاري مګر سپارښتنه شوې): For full customization of RGB lighting and other settings, download and install the HyperX NGENUITY software from the official HyperX webسایټ
انځور: یو مفصل view of the HyperX QuadCast S RGB USB Condenser Microphone, showcasing its design and integrated shock mount.
عملیاتي لارښوونې
HyperX Cloud III Wireless Headset Operation
- پاور آن/بند: Press and hold the power button on the earcup to turn the headset on or off.
- د حجم کنټرول: Use the volume wheel located on the earcup to adjust audio output levels.
- د مایکروفون خاموش کول: Press the microphone mute button on the earcup to mute or unmute the microphone. An LED indicator on the microphone will show its status.
- د بیټرۍ ژوند: The headset offers up to 120 hours of battery life on a single charge. Monitor battery status via the headset's LED indicator or HyperX NGENUITY software.
- د DTS هیډفون: ایکس فضايي غږ: Activate and configure DTS Headphone:X Spatial Audio through the HyperX NGENUITY software for enhanced sound localization.
Image: A person wearing the HyperX Cloud III Wireless Headset, illustrating the long battery life and 2.4GHz wireless connectivity for extended gaming sessions.
Image: A person comfortably wearing the HyperX Cloud III Wireless Headset, emphasizing the comfort provided by HyperX signature memory foam and premium leatherette.
HyperX QuadCast S Microphone Operation
- Tap-to-Mute: Tap the top of the microphone to instantly mute or unmute. The LED indicator will change to show the microphone's status (on/off).
- لاسته راوړل: Use the gain control dial at the bottom of the microphone to adjust input sensitivity.
- د پولر نمونه: Select from four polar patterns (Stereo, Omnidirectional, Cardioid, Bidirectional) using the dial on the back of the microphone to optimize for different recording situations.
- د RGB رڼا: Customize the dynamic RGB lighting effects using the HyperX NGENUITY software.
- د سر غوږ جیک: Use the 3.5mm headphone jack on the back of the microphone for real-time monitoring of your audio.
Image: The HyperX QuadCast S Microphone demonstrating its tap-to-mute sensor with an LED status indicator, showing both active and muted states.
Image: The HyperX QuadCast S Microphone displayed alongside a computer screen showing the HyperX NGENUITY software interface, illustrating customization options for RGB lighting and effects.
ساتنه
- پاکول: Use a soft, dry cloth to clean the surfaces of the headset and microphone. Avoid using harsh chemicals or abrasive materials.
- ذخیره کول: وسایل په یخ او وچ ځای کې د مستقیم لمر وړانګو او سختې تودوخې څخه لرې وساتئ.
- د کیبل پاملرنه: د زیان څخه د مخنیوي لپاره په USB کیبلونو کې د تیزو کږو یا کنکونو څخه ډډه وکړئ.
- د غوږ تکیه: The ear cushions are designed for durability, but gentle cleaning can extend their lifespan.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| د هیډسیټ څخه هیڅ غږ نشته | Headset not powered on; Dongle not connected; Low battery; Incorrect audio output selected. | Ensure headset is powered on and charged. Verify USB dongle is securely connected. Check audio output settings on your device. |
| Microphone not working (headset) | مایکروفون خاموش شوی؛ په سمه توګه نه دی نښلول شوی؛ د ننوتلو ناسم وسیله غوره شوې ده. | Press the mute button to unmute. Re-attach the microphone firmly. Select the headset microphone as the input device in your system settings. |
| QuadCast S microphone not detected | USB cable loose or faulty; Incorrect input device selected; Driver issue. | Ensure USB cable is securely connected. Try a different USB port. Check system sound settings to select QuadCast S as input. Reinstall HyperX NGENUITY software if necessary. |
| Poor audio quality (QuadCast S) | Incorrect polar pattern; Gain too high/low; Environmental noise. | Adjust the polar pattern to suit your recording environment. Adjust the gain control dial. Ensure you are speaking directly into the correct side of the microphone for the selected pattern. |
| RGB lighting not working (QuadCast S) | NGENUITY software not running; Software settings incorrect. | Ensure HyperX NGENUITY software is installed and running. Check lighting settings within the software. |
مشخصات
HyperX Cloud III Wireless Headset
- د موډل نوم: کلاوډ III
- ارتباط: ۲.۴GHz بېسیم (RF)
- چلوونکي: 53mm Angled Dynamic Drivers
- د تعدد ځواب: 10Hz-21kHz
- د بیټرۍ ژوند: تر 120 ساعتونو پورې
- د چارج کولو وخت: تقریبا 4.5 ساعته
- مواد: Memory foam, Leatherette
- مایکروفون: Detachable 10mm Noise-Cancelling
- د کنټرول ډول: د حجم کنټرول، مایک خاموش
- مطابقت لرونکي وسایل: PC, PS5, PS4, Nintendo Switch, Mobile
HyperX QuadCast S RGB USB Condenser Microphone
- ډول: د USB کنډسر مایکروفون
- د پولر نمونه: سټیریو، هر اړخیزه، کارډیایډ، دوه اړخیز
- ځانګړتیاوې: Anti-vibration shock mount, Built-in pop filter, Tap-to-mute sensor with LED indicator, Gain control dial, RGB lighting (customizable via NGENUITY)
- د هیډفون محصول: 3.5mm jack for real-time monitoring
- اډاپټر نصب کړئ: Compatible with 3/8” and 5/8” thread sizes
- مطابقت لرونکي وسایل: PC, PS4, PS5, Mac
تضمین او ملاتړ
HyperX products are backed by a limited warranty. For detailed warranty information, technical support, and customer service, please visit the official HyperX webسایټ ته مراجعه وکړئ یا د دوی د ملاتړ ټیم سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
د نورو مرستو لپاره، مهرباني وکړئ لیدنه وکړئ: www.hyperx.com/support
