Garvee Commercial 12L Double Tank Slushy Machine (Model 12x2CSM) Instruction Manual

1. پیژندنه

Thank you for choosing the Garvee Commercial 12L Double Tank Slushy Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read all instructions carefully before use and retain this manual for future reference.

2. د خوندیتوب لارښوونې

To prevent injury or damage, always follow basic safety precautions, including:

• ډاډ ترلاسه کړئ چې ماشین په مستحکم، سطحه سطحه کېښودل شوی.
• Do not operate with wet hands or near water.
• د عملیاتو په جریان کې ماشومان او غیر مجاز پرسونل له ماشین څخه لرې وساتئ.
• د پاکولو یا ساتنې دمخه ماشین خلاص کړئ.
• اصلي واحد په اوبو کې مه ډوبوئ.
• Use only food-grade ingredients.
• ډاډ ترلاسه کړئ چې د ماشین شاوخوا مناسب هوا ورکول.

3. د محصول ب Featuresې

• لوړ ظرفیت: Two 12L (3.2 gal) tanks, capable of producing up to 100 cups (250 ml each) per hour.
• دوامدار ساختمان: Made from high-quality stainless steel for corrosion resistance and easy cleaning.
• قوي سړه کول: 700W professional compressor for stable operation, rapid cooling, and quick slush formation.
• Versatile Beverage Production: Suitable for margaritas, frozen cocktails, juices, smoothies, and snow melts.
• د کارونکي دوستانه ډیزاین: Independent tank lids, removable drip trays, built-in light, and self-cleaning function.
• اسانه عملیات: Simple control panel with real-time temperature monitoring and dual-mode settings for cold drinks or slush.

4. ترتیب کول

1. بسته بندي کول: Carefully remove the machine from its packaging. Inspect for any damage.
2. ځای په ځای کول: Place the machine on a sturdy, level surface with adequate ventilation around all sides. Ensure it is away from direct sunlight or heat sources.
3. Drip Trays: Install the detachable drip trays below the dispensing spouts.
4. د بریښنا پیوستون: Plug the machine into a grounded electrical outlet. Allow the unit to sit upright for at least 2 hours before first use to let the refrigerant settle.

5. عملیاتي لارښوونې

5.1. Preparing Slush Drinks

1. مخلوط چمتو کړئ: Mix your desired beverage concentrate with water. Ensure the sugar content is between 13-20% for optimal slush consistency. For alcoholic slush, ensure alcohol content is less than 13%.
2. Fill Tanks: Open the independent lids and pour the prepared mixture into the tanks. Ensure the liquid level is above the minimum mark and below the maximum fill line.
3. Select Tank: On the control panel, press "Bowl I" or "Bowl II" to select the tank you wish to operate.
4. حالت ترتیب کړئ: Press the "SET" key until "SLS" (slush mode) appears on the display.
5. Adjust Gear Level: Use the "+" or "-" keys to set the desired gear level (e.g., SLS 03 for standard slush).
6. Start Freezing: The machine will begin the rapid stirring and freezing process. Monitor the real-time temperature on the display.
7. توزیع: Once the slush reaches the desired consistency, pull the dispensing handle to serve.

5.2. Troubleshooting Slush Consistency

If your slush is too watery or too icy, adjust the sugar content or gear level:

• Slush Too Watery:
  • Method 1: Remove some liquid and add more syrup to increase sugar content (aim for 13-20%).
  • Method 2: Do not add water. Increase the gear level using the "+" key on the control panel.
• Slush Too Icy:
  • Method 1: Remove some liquid and add water to decrease sugar content (aim for 13-20%).
  • Method 2: Do not add syrup. Decrease the gear level using the "-" key on the control panel.

6. پاکول او ساتنه

6.1. Daily Cleaning (Self-Cleaning Function)

1. خالي ټانکونه: Dispense any remaining liquid from the tanks.
2. اوبه اضافه کړئ: په ټانکونو کې پاکې اوبه واچوئ.
3. Select Tank: Press "Bowl I" or "Bowl II" to select the tank.
4. Activate Clean Mode: Press the "SET" key until "CLEAN" appears on the display. The machine will stir the water for cleaning.
5. د اوبو ایستل: Dispense the dirty water from the tanks. Repeat if necessary.

6.2. Disassembly and Assembly for Deep Cleaning

For thorough cleaning, especially of the freezing cylinders and agitators, follow these steps:

1. ټانک لرې کړئ: Lift the tank from the main unit.
2. Disassemble Agitator: Carefully remove the agitator (spiral part) and the sealing rings from the freezing cylinder.
3. Remove Freezing Cylinder: Gently pull out the metal freezing cylinder.
4. پاکې برخې: Wash all removed parts (tank, agitator, sealing rings, freezing cylinder) with warm, soapy water. Rinse thoroughly and dry completely.
5. غوړول: Apply a thin layer of food-grade lubricant to the sealing rings before reassembly.
6. بیا یوځای کول: Reverse the disassembly steps to reassemble the machine. Ensure all parts are securely in place.

7. ستونزه حل کول

8. مشخصات

• د ماډل شمیره: 12x2CSM
• نښه: ګروی
• د ټانک ظرفیت: 2 x 12 Liters (approx. 2 x 3.2 Gallons)
• ځواک: 700W
• مواد: د زنګ وهلو سټیل (کور)
• د توکي وزن: ۲.۴۵ پونډه
• د بسته ابعاد: 35.83 x 22.83 x 20.28 انچه

9. تضمین او ملاتړ

This product comes with a manufacturer's warranty. For warranty details, customer support, or service inquiries, please refer to the warranty card included in your packaging or visit the Garvee website. You can also contact Garvee Direct, the seller, for assistance.

10. Visual Aids and Demonstrations

۳. د محصول انځورونه

Figure 1: Garvee Commercial Slushy Machine with two tanks filled with different colored slush drinks, showing the handles and drip-proof valves.

Figure 2: Close-up of the Garvee Slushy Machine's tanks, highlighting the 12L capacity and ability to create two flavors simultaneously.

Figure 3: Image showing the strong cooling system of the Garvee Slushy Machine, with an efficient condenser and compressor, and cold beverage temperature range.

شکل 4: مفصل view of the Garvee Slushy Machine's user-friendly design, including rebound handles, heat dissipation vents, detachable drip trays, and a simple operation panel.

Figure 5: Dimensions of the Garvee Slushy Machine and examples of its use in multiple scenarios like parties, bars, and kitchens.

۸. د محصول رسمي ویډیوګانې