پیژندنه
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your GAME 7011-E Sand Filtration System. This system is designed for above-ground pools up to 25,000 gallons, featuring a 16-inch filter tank, a 3/4 HP pump, and a digital timer for automated filtration cycles. Please read all instructions carefully before assembly and use.
د خوندیتوب معلومات
خبرداری: د دې لارښوونو په تعقیب کې پاتې راتلل کولی شي د جدي ټپي کیدو یا مرګ لامل شي.
- تل د هر ډول خدمت یا ساتنې ترسره کولو دمخه د پمپ سره بریښنا قطع کړئ.
- Ensure the electrical supply is protected by a Ground Fault Circuit Interrupter (GFCI).
- که چیرې د بریښنا تار یا پلګ خراب شوی وي، پمپ مه چلوئ.
- Keep children away from the filtration system during operation.
- The system must be installed on a solid, level surface.
- د بریښنا کنډک مه ښخ کړئ.
- Consult a qualified electrician for electrical connections if unsure.
د بسته محتويات
د غونډې پیل کولو دمخه ډاډ ترلاسه کړئ چې لاندې لیست شوي ټول اجزا شتون لري او زیانمن شوي ندي.

Image: A visual representation of all components included in the package, such as the six-way valve, sand filter tank, pump, hoses, and hardware.
- Six-Way Valve
- 16-inch Sand Filter Tank
- 16-inch Sand Filter Tank Base
- 16-inch Manifold Tube
- Manifold Lateral Assembly
- Flange Clamp
- 0.75 HP Pump & Motor Assembly & Base
- د شګو ډال
- Fasteners, Hardware & Gaskets
- د فشار ګیج
- Sand Filter Tank Drain Plug
- 20", 40" & 120" Hoses
- د چلوونکي باسکیټ
- Strainer Basket Lid
- Motor Drain Plug
- د لید شیشه
مجلس او نصب کول
Follow these steps for proper assembly and installation of your sand filtration system.

Image: The complete GAME 7011-E Sand Filtration System, including the sand filter tank, pump, and multi-port valve.
- د سیسټم موقعیت: Place the filter system on a firm, level surface, preferably concrete, at least 2 feet from the pool. Ensure the location allows for proper drainage when backwashing.
- Assembling the Tank Base: Secure the sand filter tank onto its base.
- Installing Lateral Assembly: Insert the manifold lateral assembly into the bottom of the filter tank. Ensure laterals are spread evenly.
- د فلټر شګه اضافه کول: Carefully pour approximately 120 pounds of #20 silica sand (0.45-0.55mm) into the filter tank. Ensure the manifold tube remains centered during this process. Fill the tank about two-thirds full.
- Attaching the Six-Way Valve: Place the six-way valve onto the top of the filter tank, aligning the ports. Secure it with the flange clamp, ensuring a tight seal. Use a #3 Phillips screwdriver for the clamp screws and ensure washers are used to prevent damage to the plastic flange. Align the clamp openings with the ridges on the valve.
- د پمپ نښلول: Attach the pump to the six-way valve using the provided hoses and fittings. Ensure all connections are tight to prevent leaks. The system uses 1.5-inch inlet and outlet connections.
- د حوض سره نښلول: Connect the pool's skimmer line to the pump's inlet and the pool's return line to the six-way valve's 'RETURN' port using the provided hoses.
- Installing Pressure Gauge: Screw the pressure gauge into the designated port on the six-way valve.
- Filling the Pump with Water: Before starting, remove the strainer basket lid and fill the pump with water to prime it. Replace the lid securely.
- بریښنایی پیوستون: Plug the 7.9-meter power cord into a GFCI-protected outlet.

Image: The compact sand filtration system positioned beside an above-ground pool, demonstrating its suitable size for various setups.
عملیات
The GAME 7011-E Sand Filtration System features a 6-way valve and a digital timer for controlling filtration cycles.

انځور: یو اوورview highlighting the pressure gauge for monitoring system performance, the 6-way valve for controlling water flow, and the strainer basket for pre-filtering debris.
6-Way Valve Functions
د زیان څخه د مخنیوي لپاره تل د والو موقعیت بدلولو دمخه پمپ بند کړئ.
- فلټر: Normal filtering mode. Water flows through the sand, trapping debris, and returns to the pool.
- شاتګ: Cleans the filter sand by reversing water flow, sending dirty water to waste. Use when pressure gauge reads 8-10 PSI above starting pressure.
- نوی کول: Used after backwashing to flush out any remaining dirty water from the valve and sand bed to waste before returning to FILTER mode.
- کثافات/ فاضله مواد: Bypasses the filter, sending water directly to waste. Useful for lowering pool water level or vacuuming heavy debris directly to waste.
- بیا تکرارول: Bypasses the filter, circulating water directly back to the pool. Useful for mixing chemicals without filtering.
- تړل شوی: Shuts off all flow to the filter and pump. Use for servicing the pump or filter.
ډیجیټل ټایمر عمل

Image: Close-up of the integrated digital timer, allowing for programmable filtration cycles.
The digital timer allows for automated control of filtration cycles. Refer to the timer's specific instructions for setting daily run times. Ensure the timer is set to provide adequate filtration for your pool size and usage, typically 8-12 hours per day.
ساتنه
Regular maintenance ensures optimal performance and longevity of your filtration system.
- د شا مینځل: Perform backwashing when the pressure gauge reads 8-10 PSI above its clean starting pressure, or when water flow to the pool decreases significantly.
- وینځل: Always rinse for 30-60 seconds after backwashing to settle the sand and prevent dirty water from returning to the pool.
- د فلټر ټوکرۍ پاکول: Regularly inspect and clean the pump's strainer basket. Turn off the pump, close necessary valves, remove the lid, empty debris, and replace.
- د شګو ځای ناستی: Filter sand typically needs to be replaced every 3-5 years, depending on usage and water chemistry.
- ژمی کول: In cold climates, drain all water from the pump and filter tank to prevent freezing damage. Store the pump and valve indoors if possible.
د ستونزو حل کول
This section addresses common issues you might encounter with your sand filtration system.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| د نښلونو څخه اوبه بهېږي | Loose fittings, worn O-rings/gaskets, improper clamp سمون | Tighten all connections. Inspect and replace O-rings/gaskets if damaged. Ensure flange clamp is correctly aligned and tightened. |
| شګه بیرته حوض ته ځي | Damaged laterals, incorrect sand type/size, insufficient rinse after backwash. | Check laterals for damage. Ensure correct #20 silica sand is used. Perform a thorough rinse cycle after backwashing. |
| د اوبو ټیټ جریان/فشار | Clogged strainer basket, dirty filter sand, air in the system, closed valves. | Clean strainer basket. Backwash and rinse filter. Bleed air from the system. Ensure all necessary valves are open. |
| پمپ نه پریمینګ | Insufficient water in pump, air leak in suction line, clogged skimmer/main drain. | Fill pump with water. Check all suction line connections for air leaks. Clear any blockages in skimmer or main drain. |
| Excessive pump noise | Lack of water, air in system, cavitation, motor bearing issue. | Ensure pump is fully primed. Check for air leaks. Verify adequate water supply to pump. If noise persists, contact support. |
مشخصات
| فیچر | تفصیل |
|---|---|
| برانډ | GAME |
| د ماډل شمیره | 7011-E |
| د هارس پاور پمپ | 0.75 HP |
| د پمپ د جریان کچه | 3,698 GPH |
| د فلټر ټانک اندازه | 16 انچه |
| د شګو ظرفیت | ۲.۴۵ پونډه |
| د حوض اعظمي ظرفیت | تر 25,000 ګیلن پورې |
| د ننوتلو/ وتلو د اتصال اندازه | ۷۸۷ انچه |
| د بریښنا تار اوږدوالی | 7.9 متره |
| ابعاد (L x W x H) | 15.7 x 26.7 x 30.1 انچه |
| د توکي وزن | ۲.۴۵ پونډه |
| د خوندیتوب ځانګړتیا | جوړ شوی GFCI |
تضمین او ملاتړ
The GAME 7011-E Sand Filtration System comes with a د تولید کونکي 2 کلن تضمین. For warranty claims, technical assistance, or replacement parts, please contact GAME customer support. Refer to the product packaging or the official GAME webد اوسني اړیکو معلوماتو لپاره سایټ.

Image: The sand filtration system integrated with a GAME SCG (Saltwater Chlorinator Generator) system, illustrating compatibility.





