Mastfuyi FY8830 Portable Gas Leak Detector User Manual

1. پیژندنه

The Mastfuyi FY8830 is a portable gas leak detector designed to quickly and reliably identify combustible gas leaks in various environments. It features audible and visual alarms to alert users to the presence of gas, making it an essential tool for maintaining safety in homes and professional settings. This manual provides detailed instructions for the proper use and maintenance of your device.

2. د خوندیتوب معلومات

Please read this manual carefully and familiarize yourself with the product before use. Keep this manual for future reference to avoid accidents or physical injury.

• Use the detector only for its specified purpose and within the parameter range detailed in the technical specifications.
• If the device shows damage, fault, or incorrect display, do not use it.
• Do not use the device near live components.
• Avoid using in enclosed rooms with explosive gas mixtures.
• Do not expose the detector to water, solvents, acids, or other corrosive substances.
• Only perform repair and maintenance work as described in this instruction manual. Follow prescribed operating steps.
• This detector is not a safety monitoring instrument for your physical safety. It is a tool to assist in detecting gas leaks.
• Ensure that the gas content does not exceed 20% LFL (Lower Flammable Limit).
• Starting up and preheating in a gas-polluted environment will increase the alarm threshold of the detector. Always start the device in a clean air environment.

3. د محصول توضیحات

The Mastfuyi FY8830 is a handheld, portable gas leak detector equipped with a high-precision semiconductor sensor. It is designed to detect a wide range of combustible gases, providing both audible and visual alerts to indicate the presence and concentration of gas.

کلیدي ځانګړتیاوې:

• High Precision Semiconductor Sensor: Adopts an imported gas-sensitive semiconductor sensor for accurate measurements.
• Wide Range Gas Detection: Capable of detecting natural gas, gasoline, biogas, coal gas, methane (CH4), propane (C3H8), butane (C4H10), ethane (C2H6), ethylene (C2H4), propylene (C3H6), butene (C4H8), acetylene (C2H2), butynyl acetylene (C4H6), carbon monoxide (CO), hydrogen (H2), hydrogen sulfide (H2S), and phosphine (PH3).
• د تنظیم وړ حساسیت: Features high and low sensitivity modes for precise leak pinpointing or broader area scanning.
• د اورېدو وړ او بصري الارم: Provides clear alerts with indicator lights changing from yellow to red and a buzzing sound that increases in frequency with gas concentration.
• چټک غبرګون: Power-on warm-up time of approximately 30 seconds, with a response time of less than 5 seconds.
• اتوماتیک بریښنا بند: The device automatically turns off after about 5 minutes of no operation or detection signals to conserve battery life.

Figure 1: The Mastfuyi FY8830 Gas Leak Detector can detect a wide range of combustible gases.

۲. اجزا او برخې

The Mastfuyi FY8830 Gas Leak Detector consists of the following main components:

Figure 2: Labeled components of the Mastfuyi FY8830 Gas Leak Detector.

1. سینسر: The gas-sensitive semiconductor component responsible for detecting combustible gases.
2. د رڼا الارم: LED indicators that change color (yellow to red) and flash to indicate gas concentration.
3. High Sensitivity Key (H): Button to switch to high sensitivity mode for increased detection range.
4. Low Sensitivity Key (L): Button to switch to low sensitivity mode for pinpointing leaks.
5. د فعال / بند تڼۍ: Power key to turn the device on or off.
6. د بیټرۍ پوښ: Located at the bottom of the device, provides access to the battery compartment.

5. ترتیب کول

د بیټرۍ نصب کول

The Mastfuyi FY8830 requires two 1.5V AAA alkaline batteries (not included). To install the batteries:

1. Unscrew the battery cover located at the bottom of the device.
2. دوه AAA بیټرۍ دننه کړئ، د سم قطبیت ډاډ ترلاسه کړئ (+/-).
3. Replace the battery cover and screw it securely.

6. عملیاتي لارښوونې

Follow these steps for proper operation of your gas leak detector:

1. پاور آن: Press the ON/OFF button to turn on the device. Ensure this is done in a clean air environment.
2. مخکې ګرمول: The detector will begin preheating the sensor. Wait for approximately 30 seconds until the preheating is complete, indicated by a "beep" sound.
3. کشف: After preheating, take the device to the area you wish to inspect. Gradually move the sensor head closer to potential leak points.
4. د الارم نښه: When combustible gas is detected, the indicator light will change from yellow to red as the gas concentration increases. The buzzing sound will also become faster with higher gas concentrations.
5. بندول: Briefly press the ON/OFF button to turn off the device, accompanied by a "beep" sound.

Figure 3: Simple operation steps for the Mastfuyi FY8830.

د تنظیم وړ حساسیت

The device offers two sensitivity modes for more accurate detection:

• High Sensitivity (H): Press the 'H' key. The indicator light will be green. This mode increases the detection range to sense the approximate extent of gas leaks over a wider area.
• Low Sensitivity (L): Press the 'L' key. The indicator light will be yellow. This mode reduces the detection range, allowing you to pinpoint the exact source of gas leaks more precisely.

Figure 4: Adjustable sensitivity settings for precise leak detection.

د غږ او رڼا الارم

The Mastfuyi FY8830 provides clear indications of gas presence through both sound and light. The visual alarm consists of LED lights that illuminate and change color based on gas concentration, while the audible alarm emits a buzzing sound that increases in frequency as the gas concentration rises. This dual alert system ensures that the measurement effect is clear and the detection situation is grasped in real-time.

Figure 5: The device provides clear sound and light alarms.

7. ساتنه

Proper maintenance ensures the longevity and accuracy of your gas leak detector:

• Cleaning the Sensor Head: If the sensor head becomes dirty, clean it with a soft, dry cloth.
• د سي پاکولasing: که سيasing is dirty, clean it with a damp cloth (using soap solution). Do not use corrosive cleaning products or solvents.
• د بیټرۍ پاملرنه: Remove batteries when the device is not in use for extended periods to prevent corrosion.
• منظم خدمتونه: It is recommended to have the gas detector serviced by an authorized service center once a year.

8. ستونزه حل کول

If you encounter issues with your Mastfuyi FY8830, consider the following:

• وسیله نه فعاله کیږي: وګورئ چې بیټرۍ په سمه توګه نصب شوي او کافي چارج لري. که اړتیا وي نو بیټرۍ بدل کړئ.
• Inaccurate readings or no detection: Ensure the device has completed its 30-second preheating cycle in a clean air environment. If used in a gas-polluted area during startup, the alarm threshold may be affected.
• Alarm constantly active: Move the device to a known clean air environment to allow it to reset. If the alarm persists, there might be a gas presence in the area or a sensor issue.
• ورو غبرګون: While the typical response time is less than 5 seconds, environmental factors or very low leak levels might cause a slight delay. Ensure the sensor head is close to the suspected leak source.

د هغو دوامداره ستونزو لپاره چې د دې ګامونو په واسطه حل نه شي، مهرباني وکړئ د پیرودونکو ملاتړ سره اړیکه ونیسئ.

9. مشخصات

10. تضمین او ملاتړ

Mastfuyi provides a 48-month unconditional warranty for this product. We are committed to continuous development and innovation to improve product quality and meet customer needs. Our team of professional developers and designers ensures novel, high-quality, safe, durable, accurate, and cost-effective technological products.

For any questions or product inquiries, we offer ۲۴/۷ آنلاین د پلور وروسته خدمت to provide prompt assistance.

For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official Mastfuyi webسایټ