INFICON D-TEK Stratus Refrigerant Leak Detector and Portable Monitor User Manual

1. پیژندنه

The INFICON D-TEK Stratus is an advanced refrigerant leak detector and portable monitor designed for efficient and accurate leak detection. This device combines the precision of D-TEK Select detectors with the broad area scanning capability of a portable monitor, offering a comprehensive solution for identifying refrigerant leaks.

It features an infrared sensor, dual operating modes (Cloud Hunting and Pinpoint), and a robust design for field use. This manual provides essential information for the proper setup, operation, and maintenance of your D-TEK Stratus unit.

2. کلیدي ځانګړتیاوې

• دوه ګونی عملیاتي حالتونه: Cloud Hunting mode for locating the general area of highest concentration and Pinpoint mode for precise leak identification.
• پرمختللی انفراریډ سینسر: Redesigned for enhanced performance and an extended lifespan of over 2,000 hours.
• لوړ حساسیت: Detects leaks as small as 0.03 oz./year (1 g/year) without degradation over time.
• Versatile Refrigerant Detection: Compatible with CFCs, HCFCs, HFCs, HFOs, and A2Ls. Optional sensors are available for CO2 and flammable refrigerants.
• Field Replaceable Components: Sensor, battery, filters, and probe are easily replaceable in the field.
• د لیتیم - آون بیټرۍ: Provides extended operation with quick charge capability.
• د کاروونکي دوستانه انٹرفیس: Large, easy-to-read LCD display and intuitive controls.
• Automatic and Manual Zero Modes: For optimal calibration in various environments.

3. د بسته محتويات

د کڅوړې د پرانیستلو پر مهال، ډاډ ترلاسه کړئ چې لاندې ټول توکي پکې شامل دي:

Image: The INFICON D-TEK Stratus device shown with its complete set of accessories, including the main unit, various international AC wall chargers, a DC car charger, earbuds, spare filters, an extra-long probe, an infrared sensor, a lithium-ion battery, and a durable carry case.

• D-TEK Stratus Unit
• Infrared Sensor (pre-installed or separate)
• د لیتیم آیون بیټرۍ (مخکې نصب شوې یا جلا)
• AC Wall Charger (US & International adapters)
• د DC موټر چارجر
• Extra-Long Probe
• غوږوالۍ
• اضافي فلټرونه
• کیری کیسی

4. ترتیب کول

4.1 ابتدايي چارج کول

Before first use, fully charge the lithium-ion battery. Connect the provided AC wall charger or DC car charger to the micro USB power input port on the device. The charging indicator on the display will show the charging status.

4.2 Sensor and Filter Installation

Ensure the infrared sensor and filter are correctly installed. The sensor is typically pre-installed. Filters are located at the probe tip and should be clean and free of debris for optimal performance.

Image: The INFICON D-TEK Stratus device, showing its main body, flexible probe, and digital display indicating a refrigerant concentration of 1345 ppm. This image highlights the device's ergonomic design and clear interface.

4.3 وسیله ختمه شوهview

Familiarize yourself with the device's controls and components:

انځور: یو مفصل view of the INFICON D-TEK Stratus, with labels pointing to key components such as the probe tip/filter, headphone jack, volume button, battery cover, eject button, micro USB power input, SENS/ZERO button, and Mode/Max button. The power button is indicated as not visible in this view.

• د بریښنا تڼۍ: وسیله آن/بندوي.
• Mode/Max Button: Toggles between Cloud Hunting and Pinpoint modes, and displays maximum readings.
• SENS/ZERO Button: Adjusts sensitivity and performs manual zeroing.
• د سر غوږ جیک: For connecting earbuds for audio alerts.
• د حجم تڼۍ: Adjusts audio alert volume.
• د مایکرو USB بریښنا ان پټ: د وسیله چارج کولو لپاره.
• د وتلو تڼۍ: Releases the sensor module for replacement.
• د بیټرۍ پوښ: Provides access to the battery compartment.
• Probe Tip/Filter: The detection point, containing a replaceable filter.

5. عملیاتي لارښوونې

۳.۲ د بریښنا فعالول او ابتدايي کیلیبریشن

1. د وسیلې د چالانولو لپاره د بریښنا تڼۍ فشار ورکړئ او ونیسئ.
2. Allow the device to warm up and perform its automatic zeroing process in a clean, leak-free environment. This ensures accurate readings.

5.2 عملیاتي طریقې

The D-TEK Stratus offers two distinct operating modes for efficient leak detection:

Image: This graphic illustrates the two primary operating modes of the INFICON D-TEK Stratus. The top section shows "Cloud Hunting Mode" with a digital display indicating 1345 ppm, used for finding areas of highest concentration. The bottom section shows "Pinpoint Mode" with a color-coded bar graph, used for precisely locating the leak source.

5.2.1 Cloud Hunting Mode

• Use this mode to quickly scan large areas and identify the general vicinity of a refrigerant leak.
• The display will show refrigerant concentration in parts per million (ppm).
• Move the probe slowly through the suspected area. Higher readings indicate proximity to a leak.

5.2.2 Pinpoint Mode

• Once the general leak area is identified using Cloud Hunting, switch to Pinpoint mode for precise leak location.
• In this mode, the device provides a more focused indication, often with a visual bar graph or escalating audio tone, to guide you directly to the leak source.
• Move the probe very slowly and methodically around suspected leak points.

5.3 Adjusting Sensitivity and Zeroing

• حساسیت: Press the SENS/ZERO button to cycle through sensitivity levels. Adjust sensitivity based on the size of the suspected leak and environmental conditions.
• Manual Zero: If the device is alarming in a clean environment, move the probe to an area free of refrigerants and press and hold the SENS/ZERO button to perform a manual zero.

6. د سینسر معلومات

The D-TEK Stratus utilizes an advanced infrared sensor for detecting a wide range of refrigerants. The sensor has an expected lifespan of over 2,000 hours.

6.1 Compatible Refrigerants

The standard infrared sensor detects:

• CFCs (Chlorofluorocarbons)
• HCFCs (Hydrochlorofluorocarbons)
• HFCs (Hydrofluorocarbons)
• HFOs (Hydrofluoroolefins)
• A2Ls (Mildly Flammable Refrigerants)

۱۱ اختیاري سینسرونه

For detecting other gases, optional sensors are available and can be easily interchanged:

Image: This image displays three different sensor modules for the INFICON D-TEK Stratus. The red sensor is for CFCs, HCFCs, HFCs, HFOs, and A2Ls (included refrigerant sensor). The silver sensor is for flammable refrigerants (requires optional sensor). The green sensor is for CO2 (requires optional sensor). This illustrates the device's versatility with interchangeable sensors.

• CO2 سینسر: Required for detecting Carbon Dioxide.
• Flammable Refrigerants Sensor: Required for detecting flammable refrigerants.

7. د بیټرۍ معلومات

The D-TEK Stratus is powered by a rechargeable Lithium-Ion battery, providing approximately 9 hours of continuous operation on a full charge. The battery is designed for quick charging.

7.1 چارج کول

Use only the INFICON-supplied AC wall charger or DC car charger. Connect the charger to the micro USB port on the device. The battery indicator on the display will show the charging status.

7.2 د بیټرۍ بدلول

The Lithium-Ion battery is field replaceable. Refer to the maintenance section for instructions on how to safely replace the battery.

8. ساتنه

Regular maintenance ensures the longevity and accuracy of your D-TEK Stratus.

8.1 د فلټر ځای په ځای کول

The probe tip contains a filter that prevents contaminants from entering the sensor. Replace the filter regularly, especially if operating in dusty or dirty environments, or if you notice a decrease in sensitivity. Spare filters are included with your unit.

1. Gently unscrew the probe tip.
2. زاړه فلټر لرې کړئ.
3. یو نوی فلټر داخل کړئ.
4. Screw the probe tip back on securely.

8.2 د سینسر بدلول

The infrared sensor is field replaceable. When the sensor reaches the end of its lifespan (indicated by a message on the display or persistent inaccurate readings), it should be replaced.

1. ډاډ ترلاسه کړئ چې وسیله بنده ده.
2. Locate the eject button (refer to Device Overview).
3. Press the eject button to release the sensor module.
4. Carefully remove the old sensor.
5. Insert the new sensor module, ensuring it clicks into place.
6. Power on the device and allow it to calibrate with the new sensor.

8.3 پاکول

د وسیلې بهرنۍ برخه د d سره پاک کړئamp cloth. Do not use abrasive cleaners or solvents. Ensure the probe tip and sensor area remain clean and free of obstructions.

9. ستونزه حل کول

If you encounter issues with your D-TEK Stratus, consider the following common solutions:

• وسیله نه فعاله کیږي:
  • ډاډ ترلاسه کړئ چې بیټرۍ په بشپړ ډول چارج شوې.
  • وګورئ چې بیټرۍ په سمه توګه نصب شوې ده.
• Inaccurate Readings or Constant Alarm:
  • Perform a manual zero in a clean air environment.
  • Check and replace the probe tip filter if it is dirty or clogged.
  • Verify the sensor is correctly installed and not at the end of its lifespan.
  • Ensure the correct sensor type is installed for the refrigerant being detected.
• نه کشف:
  • Increase the sensitivity setting.
  • Ensure the probe is moved slowly and methodically.
  • Check the sensor for proper installation and remaining lifespan.
  • Confirm the presence of refrigerant; test with a known leak source if possible.
• د بیټرۍ لنډ ژوند:
  • ډاډ ترلاسه کړئ چې بیټرۍ د کارولو دمخه په بشپړ ډول چارج شوې ده.
  • که چیرې بیټرۍ نور په مؤثره توګه چارج نه ساتي، نو د هغې د بدلولو په اړه فکر وکړئ.

For persistent issues, contact INFICON customer support.

10. مشخصات

11. تضمین او ملاتړ

INFICON stands behind the quality of its products.

Image: This graphic highlights INFICON's commitment to quality and customer support. It features icons and text indicating a "2 Year Replacement Warranty," "Made in the USA with US and Imported Parts," and "US Technician Support" available via email and phone.

11.1 د تضمین معلومات

The INFICON D-TEK Stratus comes with a Two-Year Replacement Warranty. دا تضمین د عادي استعمال لاندې موادو او کاریګرۍ نیمګړتیاوې پوښي. مهرباني وکړئ د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

11.2 تخنیکي ملاتړ

For technical assistance, troubleshooting, or warranty inquiries, please contact INFICON US Technician Support. Support is available via email and phone.

The product is proudly جوړ شوی په امريکا کې with a combination of US and imported parts, reflecting a commitment to quality manufacturing.