BSIDE Dual Channel Oscilloscope Multimeter Instruction Manual

1. پیژندنه

This manual provides detailed instructions for the safe and effective use of your BSIDE 3-in-1 Handheld Oscilloscope Multimeter. This versatile device integrates the functions of a dual-channel oscilloscope, a true RMS multimeter, and a DDS signal generator, making it an essential tool for various electrical testing and measurement applications.

شکل 1: پایview of 3-in-1 functionality (Multimeter, DDS Generator, Oscilloscope).

2. ترتیب کول

2.1 د بسته محتويات

ډاډ ترلاسه کړئ چې لاندې ټول لیست شوي توکي ستاسو په کڅوړه کې شتون لري:

• 1 x Handheld Oscilloscope Multimeter
• 1 x Oscilloscope Probe
• 1 x BNC to Double-Headed Alligator Clip Test Leads
• 1 د ټیسټ لیډونه
• ۱ x ترموکوپل
• 1 x د بار وړلو قضیه
• 1 x د چارج کولو کیبل
• 8 x Marker Rings
• ۱ x د سمون وسیله
• 2 x IC Test Protection Caps
• 1 x د کارونکي لارښود

یادونه: The flexible AC current clamp is not included in the package and must be purchased separately if required.

Figure 2: The BSIDE Handheld Oscilloscope Multimeter and its complete set of accessories.

2.2 وسیله ختمه شوهview

Familiarize yourself with the physical components of the device:

• ښکاره کول: Features a 3.98-inch TFT LCD with a 178° full-viewد روښانه لوستلو لپاره زاویه.
• د ننوتلو بندرونه: Dual channels for oscilloscope measurements and a dedicated DDS output port.
• کنټرولونه: Intuitive button layout for mode selection, adjustments, and data saving.
• ساتنه: Encased in a full-body soft silicone case for enhanced durability.

Figure 3: The device features a large 3.98-inch TFT LCD for optimal readability.

Figure 4: The top panel includes input ports for CH1, CH2, and DDS signal output.

Figure 5: The device is protected by a durable full-body soft silicone case.

3. عملیاتي لارښوونې

۸ پاور آن/بند

To power on the device, press and hold the power button (usually marked with a circle and a vertical line) until the screen illuminates. To power off, press and hold the same button until the device shuts down.

3.2 د حالت انتخاب

The device offers three primary modes: Oscilloscope, Multimeter, and DDS Generator. Use the dedicated موډ button to cycle through these functions. The current mode will be displayed on the screen.

3.3 Oscilloscope Function

In Oscilloscope mode, the device displays waveforms for electrical signals. It features dual channels with a 25MHz bandwidth and a 208MSa/s real-time sampد نرخ.

• د نښلولو پروبونه: Connect the oscilloscope probe to the appropriate channel input (CH1 or CH2) on the top of the device. Ensure a secure connection.
• تنظیمات تنظیمول: Use the navigation buttons to adjust vertical sensitivity (V/div), time base (s/div), and trigger settings. The آټو button can be used for automatic waveform adjustment and display.
• اندازه کول: The screen will display various waveform parameters such as Vpp (peak-to-peak voltage), Vmax, Vmin, Vavg, Vrms, frequency, and duty cycle.

۶.۲ د څو متره فعالیت

In Multimeter mode, the device performs various electrical measurements with 6000 counts display and True RMS capability.

• د ازموینې لیډونو نښلول: Connect the red and black test leads to the appropriate input jacks (e.g., VΩmA for voltage/resistance/current, COM for common ground).
• د اندازه کولو ډولونه: The multimeter can measure:
  • DC Voltage: تر 1000V پورې
  • AC Voltage: تر 750V پورې
  • DC Current: Up to 600mA
  • AC Current: Up to 600mA (or up to 6000A with optional flexible AC current clamp)
  • مقاومت: تر 60MΩ پورې
  • ظرفیت: تر ۱۰۰ ملی متره فارنهایټ پورې
  • Temperature: -20℃ to 1000℃ / -4℉ to 1832℉ (using thermocouple)
  • د ډایډ ټیسټ
  • د دوام ازموینه
• د انتخاب ټاکنه: The device typically operates in auto-ranging mode, but manual range selection may be available via the controls.

3.5 DDS Generator Function

The DDS (Direct Digital Synthesis) Generator function allows you to output various waveforms for testing circuits.

• Connecting Output: Connect the DDS output port to your circuit using appropriate cables.
• د څپې ډولونه: Select from sine wave, square wave, triangle wave, full wave, half wave, and sawtooth wave.
• د پیرامیټونو تنظیم کول: Adjust the frequency (0-2MHz) and output amplitude (0.1-3V) using the device controls. For square waves, the duty cycle (1%-99%) can also be adjusted.

4. ساتنه

4.1 د بیټرۍ چارج کول

The device is equipped with a 5000mAh rechargeable Li-ion battery. Use the provided charging cable to connect the device to a suitable USB power source. The battery indicator on the screen will show the charging status.

Figure 6: The device features a high-capacity 5000mAh rechargeable battery.

4.2 پاکول او ذخیره کول

To clean the device, use a soft, dry cloth. Do not use abrasive cleaners or solvents. Store the device in its carrying case in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

5. ستونزه حل کول

If you encounter issues with your device, please refer to the following common troubleshooting steps:

• وسیله نه چلیږي: Ensure the battery is charged. Connect the device to a charger and attempt to power on again.
• ناسم لوستل: Check that probes and test leads are correctly connected and not damaged. Verify that the correct measurement mode and range are selected.
• No waveform display: In oscilloscope mode, ensure the input signal is within the device's measurement range and that the trigger settings are appropriate. Use the آټو button to attempt automatic adjustment.

For further assistance, please contact BSIDE customer support.

6. مشخصات

7. تضمین او ملاتړ

For warranty information, technical support, or service inquiries, please refer to the official BSIDE webسایټ ته لاړ شئ یا مستقیم د دوی د پیرودونکو خدماتو څانګې سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.