XUANZIT LLR104

د XUANZIT LLR104 ډیجیټل الارم ساعت کارونکي لارښود

Model: LLR104 | Brand: XUANZIT

1. پیژندنه

This manual provides detailed instructions for the setup, operation, and maintenance of your XUANZIT LLR104 Digital Alarm Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.

XUANZIT LLR104 Digital Alarm Clock, front view showing green LED display

Figure 1: XUANZIT LLR104 Digital Alarm Clock. This image displays the front of the clock with its green LED display showing the time 10:24 PM, and the control buttons below the display.

د محصول ځانګړتیاوې:

  • Dimmable LED Display: Ultra-clear display with 6 levels of brightness.
  • Loud Alarm: 5-level adjustable buzzer volume (65 to 85 dB).
  • Plug-in Electric: Powered via USB-C connector.
  • Memory Function: 2xAAA battery backup preserves time and settings during power outages.
  • Simple Operation: All primary buttons located on the front for ease of use.
  • Time Format: Switchable 12/24-hour display.
  • Snooze Function: Adjustable snooze time from 1 to 15 minutes.

2. ترتیب کول

2.1 د بریښنا نښلول

  1. Connect the provided USB-C cable to the USB-C port on the back of the alarm clock.
  2. Plug the other end of the USB-C cable into a compatible USB power adapter (not always included) and then into a wall outlet. The clock display will illuminate.
  3. For memory backup, open the battery compartment on the back of the clock and insert 2 AAA batteries (not included). These batteries will preserve time and alarm settings in case of a power interruption, but will not power the display.
شاته view of XUANZIT LLR104 Digital Alarm Clock showing USB-C port and battery compartment

Figure 2: Power and Battery Backup. This image shows the rear of the clock, highlighting the Universal USB-C Connector for power input and the 2 x AAA Battery Compartment for memory function.

۲.۳ د لومړني وخت تنظیم

  1. " کېکاږئ او ونیسئ"Time-Set" button (labeled "12/24hr Time-Set") located on the front of the clock. The hour digits will begin to flash.
  2. وکاروئ "+"یا"-" buttons to adjust the hour. Pay attention to the PM indicator if using 12-hour format.
  3. " فشار ورکړئTime-Set" button again to switch to minute adjustment. The minute digits will flash.
  4. وکاروئ "+"یا"-" buttons to adjust the minutes.
  5. " فشار ورکړئTime-Set" button a third time to confirm the time setting and exit time setting mode.

3. عملیاتي لارښوونې

مخکی view of XUANZIT LLR104 Digital Alarm Clock showing all control buttons

Figure 3: Front Panel Controls. This image highlights the five control buttons on the front of the clock: 12/24hr Time-Set, ON/OFF AL-Set, SNOOZE, -, and +.

۵.۳ د ۱۲/۲۴ ساعتونو بڼه تنظیمول

To switch between 12-hour and 24-hour time display, briefly press the "Time-Set" button (labeled "12/24hr Time-Set") when not in time setting mode. The PM indicator will appear for 12-hour format (PM only, AM is implied by absence of PM).

Comparison of 12-hour and 24-hour time formats on XUANZIT LLR104 Digital Alarm Clock

Figure 4: 12Hr and 24Hr Time Formats. This image illustrates the clock displaying time in both 12-hour format (10:24 PM) and 24-hour format (22:24).

3.2 د الارم تنظیم کول

  1. " کېکاږئ او ونیسئ"AL-Set" button (labeled "ON/OFF AL-Set"). The alarm hour digits will begin to flash, and an alarm icon (bell symbol) will appear on the display.
  2. وکاروئ "+"یا"-" buttons to adjust the alarm hour.
  3. " فشار ورکړئAL-Set" button again to switch to alarm minute adjustment. The alarm minute digits will flash.
  4. وکاروئ "+"یا"-" buttons to adjust the alarm minutes.
  5. " فشار ورکړئAL-Set" button a third time to confirm the alarm setting. The alarm icon will remain on, indicating the alarm is active.

3.3 Turning Alarm On/Off

Briefly press the "AL-Set" button (labeled "ON/OFF AL-Set") when not in alarm setting mode to toggle the alarm on or off. The alarm icon will appear when the alarm is active and disappear when it is off.

۶.۶ د الارم حجم تنظیمول

When the alarm is sounding, press the "+"یا"-" buttons to cycle through the 5 available buzzer volume levels (65dB to 85dB). The selected volume will be saved for future alarms.

XUANZIT LLR104 Digital Alarm Clock with 5-level buzzer volume indicator

Figure 5: Adjustable Alarm Volume. This image shows the clock with an overlay indicating 5 levels of buzzer volume, ranging from Quiet (65dB) to Extra Loud (85dB).

۴.۳ د ښودنې روښانتیا تنظیمول

Briefly press the "لنډول" button when the alarm is not sounding to cycle through the 6 levels of LED display brightness. Select the brightness level that suits your preference.

XUANZIT LLR104 Digital Alarm Clock showing different brightness levels

Figure 6: Dimmable LED Display. This image demonstrates the clock's display at various brightness levels, from very dim to very bright.

3.6 د سنوز فعالیت

When the alarm sounds, press the "لنډول" button to temporarily silence the alarm. The alarm will sound again after the preset snooze duration. The default snooze duration is 9 minutes. To adjust the snooze duration (1-15 minutes):

  1. While the alarm is sounding, press and hold the "لنډول" button. The snooze duration will flash.
  2. وکاروئ "+"یا"-" buttons to set your desired snooze duration (1-15 minutes).
  3. Briefly press the "لنډول" button again to confirm the setting and activate snooze.

To turn off the alarm completely when it is sounding, press any button other than "لنډول" (e.g., "ON/OFF AL-Set", "Time-Set", "+", or "-").

4. ساتنه

4.1 پاکول

  • Ensure the clock is unplugged from the power source before cleaning.
  • Wipe the clock's surface with a soft, dry, or slightly damp ټوکر
  • د کثافاتو پاکوونکي، محلولونه، یا کیمیاوي سپرې مه کاروئ، ځکه چې دا ممکن پای یا داخلي برخو ته زیان ورسوي.

۴.۲ د بیټرۍ بدلول (بیک اپ)

  • If the clock frequently loses time or settings during brief power interruptions, the AAA backup batteries may need replacement.
  • Unplug the clock from the main power source.
  • د ساعت په شا کې د بیټرۍ کڅوړه خلاص کړئ.
  • زړې AAA بیټرۍ لرې کړئ او دوه نوي AAA بیټرۍ دننه کړئ، ترڅو سم قطبي (+/-) ډاډمن شي.
  • Close the battery compartment and reconnect the clock to its power source.

5. ستونزه حل کول

ستونزهاحتمالي لاملد حل لاره
د ساعت ښودنه بنده ده.بریښنا نشته.Ensure the USB-C cable is securely connected to the clock and a working power adapter/outlet.
Clock loses time/settings after power outage.د بیک اپ بیټرۍ مړه شوي یا نصب شوي ندي.Install 2 new AAA batteries or replace existing ones in the battery compartment.
الارم نه غږېږي.الارم فعال شوی نه دی یا حجم ډیر ټیټ دی.Ensure the alarm icon is visible on the display. Adjust alarm volume using the '+' or '-' buttons when the alarm is sounding.
ښودنه ډېره روښانه/کمه ده.د روښانتیا کچه سمون ته اړتیا لري.Briefly press the "SNOOZE" button to cycle through brightness levels.
وخت/الارم نشي ټاکل کېدای.Not in setting mode or buttons not responding.Press and hold "Time-Set" or "AL-Set" until digits flash. If unresponsive, unplug and replug the clock to reset.

6. مشخصات

  • ماډل: LLR104 (XZT104G)
  • نښه: XUANZIT
  • د ښودلو ډول: LED
  • د بریښنا سرچینه: USB-C (Input: DC 5V)
  • بیک اپ بیټرۍ: 2 x AAA (not included, for memory function only)
  • د الارم حجم: 5 levels, 65-85 dB
  • روښانه کول: 6 کچه
  • د سنوز موده: د ۱-۳۰ دقیقو لپاره د تنظیم وړ
  • د وخت بڼه: 12/24 hour switchable
  • مواد: پلاستیک
  • د محصول ابعاد: نږدې 3.56 x 3.81 x 7.62 سانتي متره (1.4 x 1.5 x 3 انچه)
  • د توکي وزن: نږدې 99.79 g (3.52 oz)

7. د پیرودونکي ملاتړ

For any questions, concerns, or technical assistance regarding your XUANZIT LLR104 Digital Alarm Clock, please refer to the retailer's customer service channels or visit the official XUANZIT webد ملاتړ معلوماتو لپاره سایټ.

مهرباني وکړئ دا لارښود د راتلونکي حوالې لپاره وساتئ.

Documents - XUANZIT – LLR104

اړوند اسناد نشته