د پرو کټ MT-2017N انلاګ ملټي میټر کارونکي لارښود

1. د خوندیتوب معلومات

Please read and understand all safety instructions before operating the Pro'sKit MT-2017N Analog Multimeter. Failure to follow these instructions may result in electric shock, fire, or personal injury.

• تل ډاډ ترلاسه کړئ چې ملټي میټر د کارولو دمخه په ښه کاري حالت کې دی. د زیان لپاره د ازموینې لیډونه معاینه کړئ.
• د والیت غوښتنه مه کوئtage or current that exceeds the maximum rated values for the selected range.
• د حجم سره کار کولو پر مهال له احتیاط څخه کار واخلئtagد 30V AC RMS، 42V چوکۍ، یا 60V DC څخه پورته. دا حجمونهtagد شاک خطر رامنځته کوي.
• تل د سرکټ سره بریښنا قطع کړئ او لوړ ولټ خارج کړئtagد مقاومت، تسلسل، ډایډونو، یا ظرفیت اندازه کولو دمخه د e capacitors.
• ډاډ ترلاسه کړئ چې د اندازه کولو دمخه سم فعالیت او حد غوره شوی.
• Replace batteries and fuses only with the specified type and rating.
• The device complies with CE and RoHS standards.

2. محصول ختم شوview

The Pro'sKit MT-2017N is a protective function analog multimeter designed for accurate and safe electrical measurements. It features a mirrored aluminum dial, robust protective holster, built-in stand, and hook-up design for convenience.

کلیدي ځانګړتیاوې:

• Clear Analog Panel: Easy-to-read mirrored aluminum dial for precise measurements.
• محافظتي دندې: Equipped with fuses (0.5A/250V & 10A/250V) and a resettable fuse for overload protection.
• څو اړخیزه اندازه ګیري: Capable of measuring DCV, DCA, ACV, Resistance, Capacitance, Diode, Transistor (hFE), LED test, and Battery check.
• د بزر دنده: For continuity testing.
• قوي ډیزاین: High-quality materials with a spring design for drop protection and rubber casing for anti-slip grip.
• مناسب ځانګړتیاوې: Foldable stand, hook-up design, and screw-on lock for easy battery/fuse changes.
• Gilded Test Leads: 1000V/10A gilded test leads for accurate measurements.

شکل 2.1: مخکی view of the Pro'sKit MT-2017N Analog Multimeter.

شکل 2.2: مفصل view of the multimeter's analog panel, showing the pointer, function selection dial, zero adjustor, COM socket, ACA 10A socket, and test lead connections.

شکل 2.3: داخلي view highlighting the triple protection features: 0.5A/250V & 10A/250V fuses, double gilded circuit board, and a resettable fuse.

شکل 2.4: شاته view of the multimeter, illustrating the foldable stand, hook-up design, and screw-on lock for battery/fuse access.

3. ترتیب کول

3.1 د بیټرۍ نصب کول

The Pro'sKit MT-2017N requires 1 Lithium Polymer battery (included) for operation. To install or replace batteries:

1. ډاډ ترلاسه کړئ چې ملټي میټر بند دی او د ازموینې ټولې لیډونه منقطع کړئ.
2. د واحد په شا کې د بیټرۍ کڅوړه ومومئ.
3. Use a screwdriver to loosen the screw-on lock and open the battery cover.
4. Insert the required batteries (1 Lithium Polymer battery) according to the polarity markings inside the compartment.
5. Close the battery cover and secure it with the screw-on lock.

Note: If the pointer fails to set at the central zero position during resistance measurement, the 9V battery may be weak and should be replaced.

4. عملیات

This section details the general operating procedures and specific measurement functions of the MT-2017N multimeter.

4.1 General Operating Procedures

1. پاور آن: Rotate the selector switch from the "OFF" position to the desired measurement function.
2. Zero Adjustment (for Resistance): Before measuring resistance, short the test leads and use the "Ω ADJ" knob to adjust the pointer to the zero position on the resistance scale.
3. د ازموینې لیډونو نښلول: Insert the black test lead into the "COM" (common) jack and the red test lead into the "VmAΩ+" jack for most measurements. For 10A current measurements, use the "10A" jack.

4.2 DC Voltagد (DCV) اندازه کول

1. Set the selector switch to the appropriate DCV range (e.g., 10, 50, 250, 1000). Start with the highest range if the voltage نامعلومه ده.
2. Connect the red test lead to the positive pole and the black test lead to the negative pole of the circuit under test.
3. ټوک ولولئtage value from the DCV scale on the analog display.

4.3 AC Voltagد (ACV) اندازه کول

1. Set the selector switch to the appropriate ACV range (e.g., 10, 50, 250, 1000). Start with the highest range if the voltage نامعلومه ده.
2. د ازموینې لیډونه د AC حجم په اوږدو کې وصل کړئtagد e سرچینه. د AC حجم لپاره قطبي والی مهم نه دیtage.
3. ټوک ولولئtage value from the ACV scale on the analog display.

۵.۴ د مقاومت (Ω) اندازه کول

1. Set the selector switch to the desired resistance range (e.g., X1, X10, X100, X1K, X10K).
2. Short the test leads together and adjust the "Ω ADJ" knob until the pointer reads zero on the resistance scale.
3. Connect the test leads across the component whose resistance is to be measured. Ensure the component is isolated from the circuit.
4. Read the resistance value from the resistance scale and multiply by the selected range multiplier.

4.5 د دوام ازموینه

The continuity test uses the buzzer function to indicate a low-resistance path.

1. Set the selector switch to a resistance range (e.g., X1).
2. Short the test leads and adjust the "Ω ADJ" knob to zero.
3. Connect the test leads across the circuit or component. If the resistance is lower than approximately 200 Ohms, the built-in beeper will sound.

4.6 DC Current (DCA) Measurement

1. Set the selector switch to the appropriate DCA range (e.g., 2.5mA, 25mA, 250mA, 10A). For 10A measurements, move the red test lead to the "10A" jack.
2. Connect the multimeter in series with the circuit or load under measurement. The red test lead connects to the positive side, and the black test lead to the negative side.
3. Read the current value from the DCA scale.

4.7 Capacitance (CμF) Measurement

1. Set the selector switch to the "X1K (CμF)" position.
2. Connect the red test lead to the positive pole and the black test lead to the negative pole of the capacitor.
3. Read the capacitance value from the CμF scale.

4.8 Transistor (hFE & LED) Test

1. Set the selector switch to the "hFE & LED" position.
2. د ټرانزیسټر لیډونه په ملټي میټر کې اړونده NPN یا PNP ساکټونو کې دننه کړئ.
3. Read the hFE value from the hFE scale. For LED testing, insert the LED leads into the designated sockets; the LED should light up if functional.

4.9 Battery Check (BATT)

1. Set the selector switch to the "BATT" position (for 1.5V or 9V).
2. Connect the red test lead to the positive terminal and the black test lead to the negative terminal of the battery.
3. Observe the pointer on the battery check scale. A pointer in the green zone indicates a fully charged battery, while a pointer in the red zone indicates a low battery.

5. ساتنه

5.1 د فیوز بدلول

If the multimeter fails to measure current or voltage, the fuses may need replacement. Always use fuses with the specified ratings.

1. ډاډ ترلاسه کړئ چې ملټي میټر بند دی او د ازموینې ټولې لیډونه منقطع کړئ.
2. Open the battery compartment cover on the back of the unit by loosening the screw-on lock.
3. Carefully remove the old fuses. The MT-2017N uses 0.5A/250V (5x20mm) and 10A/250V (5x20mm) fuses.
4. Insert new fuses of the correct type and rating.
5. Close the battery cover and secure it with the screw-on lock.

Note: The device also features a resettable fuse for resistance protection up to 250V / 30sec.

5.2 پاکول

قضیه د اعلان سره پاک کړئamp ټوکر او نرم صابون. د کثافاتو او محلولونو څخه کار مه اخلئ.

6. مشخصات

7. ستونزه حل کول

• نه لوستل / ناسم لوستل:
  • Check if the test leads are properly connected to the correct jacks.
  • Ensure the selector switch is set to the appropriate function and range.
  • Verify battery charge; replace if low (refer to Battery Check section).
  • Check fuses if current or high voltage measurements are not working (refer to Fuse Replacement section).
  • For resistance measurements, ensure the pointer is zero-adjusted.
• اشاره کوونکی نه حرکت کوي:
  • Confirm the multimeter is powered on.
  • Check for open circuits in the component or circuit being tested.
  • Ensure the range selected is appropriate for the expected value.
• Buzzer Not Sounding (Continuity Test):
  • Ensure the resistance is below approximately 200 Ohms.
  • Verify the selector switch is on a resistance range.

For issues not covered here, contact Pro'sKit customer support or a qualified technician.

8. تضمین او ملاتړ

Pro'sKit products are manufactured under strict quality control. For warranty information, technical support, or service inquiries, please refer to the official Pro'sKit webسایټ ته مراجعه وکړئ یا خپل سیمه ایز توزیع کونکي سره اړیکه ونیسئ.

رسمي Webسایټ: www.prokits.com.tw

UPC: 4711552163650