ILIFE Robotic Vacuum Cleaner Original Side Brushes

پیژندنه

This instruction manual provides essential information for the proper installation, operation, and maintenance of your new ILIFE Original Side Brushes. Please read this manual thoroughly before use to ensure optimal performance and longevity of the brushes and your robotic vacuum cleaner. Keep this manual for future reference.

مطابقت

These original ILIFE side brushes are designed for use with the following ILIFE robotic vacuum cleaner models:

• ILIFE A40
• ILIFE A4s
• ILIFE S5
• ILIFE S5 Pro
• ILIFE V4
• ILIFE V5s Pro
• ILIFE V5x

Using these brushes with incompatible models may result in improper fit or reduced cleaning performance.

د بسته محتويات

ستاسو په بسته کې شامل دي:

• 3 x ILIFE Original Side Brushes (Pack of 3)

Image: The product packaging for ILIFE Robotic Vacuum Cleaner Accessories, showing the brand logo and the text 'Robotic Vacuum Cleaner Accessories'. Below the packaging, three sets of black, three-pronged side brushes are displayed, indicating the contents of the pack.

د نصبولو لارښوونې

Follow these steps to install or replace the side brushes on your ILIFE robotic vacuum cleaner:

1. بندول: Ensure your robotic vacuum cleaner is powered off and disconnected from its charging base before beginning installation.
2. Flip Over: Carefully turn the robotic vacuum cleaner upside down to access the underside.
3. برشونه ومومئ: Identify the existing side brushes (if any) and their mounting points. There are typically two side brushes.
4. Remove Old Brushes (if applicable): If replacing old brushes, gently pull them upwards to detach them from their posts. Some models may require unscrewing a small screw in the center of the brush. Use a screwdriver if necessary.
5. نوي برشونه نصب کړئ: Align the central hole of the new side brush with the corresponding post on the vacuum cleaner. Press down firmly until it clicks into place. If your model uses screws, secure the brush with the screw. Ensure the brushes are securely attached and can rotate freely.
6. تکرار کړئ: Repeat the process for the second side brush.
7. پاور آن: Turn the vacuum cleaner right-side up and power it on to confirm proper installation.

عملیات

Once installed, the side brushes will automatically operate with your ILIFE robotic vacuum cleaner. Their primary function is to sweep debris, dust, and dirt from edges, corners, and along walls into the vacuum's main cleaning path, ensuring comprehensive floor coverage.

ساتنه او ځای پرځای کول

Regular maintenance of your side brushes is crucial for maintaining optimal cleaning performance:

• پاکول: Periodically check the side brushes for tangled hair, threads, or other debris. Carefully remove any obstructions using your fingers or a small cleaning tool.
• معاینه: Inspect the bristles for wear and tear. Over time, bristles may become bent or frayed, reducing their effectiveness.
• بدلول: It is recommended to replace the side brushes every 3-6 months, or sooner if significant wear is observed, to ensure consistent cleaning performance. Refer to the 'Installation Instructions' section for replacement steps.

د ستونزو حل کول

If you encounter issues with your side brushes, refer to the table below:

د محصول مشخصات

• نښه: ILIFE
• رنګ: تور
• د محصول ابعاد: 14L x 14W x 2H Centimeters (approximate, for a single brush)
• شاملې برخې: Side Brush (Pack of 3)
• د توکي وزن: 500 g (total package)
• جوړونکی: ILIFE Innovations

تضمین او ملاتړ

For warranty information or technical support regarding your ILIFE Original Side Brushes, please refer to the documentation provided with your ILIFE robotic vacuum cleaner or contact ILIFE customer service directly. Contact details for ILIFE Innovations can typically be found on their official webپه سایټ یا د محصول په بسته بندۍ کې.

Manufacturer Contact: 1800-274-5433