1. پیژندنه
Thank you for choosing the ATOMSTACK A6 Ultra 6W Laser Engraver. This manual provides essential information for the safe and effective operation, setup, and maintenance of your device. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The ATOMSTACK A6 Ultra is a high-precision laser engraving and cutting machine designed for various materials, featuring a 6W optical laser output and a unibody frame for ease of use.
2. د خوندیتوب معلومات
Operating a laser engraver involves potential risks. Adhere to all safety guidelines to prevent injury or damage to the equipment.
2.1 عمومي خوندیتوب احتیاطونه
- د سترګو ساتنه: Always wear appropriate laser safety goggles when the laser is operating. The device includes a protective shield, but additional eye protection is recommended.
- وینټیلیشن: د نقاشۍ ماشین په ښه هوا لرونکي ځای کې وکاروئ ترڅو د نقاشۍ او پرې کولو پرمهال تولید شوي لوګي او لوګی له منځه یوسي.
- د اور خطر: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation.
- د موادو مطابقت: یوازې هغه مواد چې د لیزر پروسس لپاره خوندي ګڼل کیږي، نقاشي یا پرې کړئ. د هغو موادو څخه ډډه وکړئ چې زهرجن بخارات تولیدوي یا ډیر منعکس کونکي وي.
- ماشومان او څاروي: Keep children and pets away from the laser engraver at all times. The protective cover helps prevent accidental exposure to the laser point.
- اضطراري تمځای: د بیړني تمځای تڼۍ د موقعیت او عملیاتو سره ځان بلد کړئ.
- د بریښنا رسول: Use only the provided power adapter. Ensure the power supply meets the specified voltage اړتیاوې.
۲.۱ د خوندیتوب مدغم ځانګړتیاوې
- د لیزر محافظتي پوښ: The device is equipped with an orange protective cover that filters laser light, reducing the need for additional eyewear for observers and preventing pets from seeing the laser spot.
- Auto Laser Shut-off: The enclosure features two interlocks that automatically shut off the laser when the cover is opened during operation.
- محدود سویچونه: Four-direction limit switches provide enhanced safety by defining the operational boundaries of the laser module.
- Position Movement Protection & Fire Detection: The system includes features to detect abnormal movement and potential fire hazards, enhancing operational safety.
شکل 2.1: A visual representation of the ATOMSTACK A6 Pro's comprehensive safety features, including mechanisms for position movement protection, fire detection, double-layer eye protection, automatic laser shut-off when the cover is open, and four-direction limit switches for enhanced operational safety.
3. د بسته محتويات
ډاډ ترلاسه کړئ چې ټول توکي ستاسو په کڅوړه کې شتون لري:
- 1 x ATOMSTACK A6 Ultra Laser Engraving Machine
- 1 x B3 Dust Cover
- 1 x H2 Base Kit
- 1 x Power Adapter (100-240V AC, 50/60HZ input; 24V 5A output)
- 1 x USB کیبل
- ۱ x د کارونکي لارښود (دا سند)
- Necessary assembly tools and accessories (e.g., screws, wrenches)
4. مشخصات
| فیچر | مشخصات |
|---|---|
| برانډ | اتومستیک |
| ماډل | A6 Ultra (A6 Pro) |
| د نقاشۍ اندازه | 365 x 305 mm |
| Total Machine Power | 50W |
| Optical Laser Output Power | 5-6W |
| لیزر طول موج | 455 ± 5 nm |
| د لیزر ځای | 0.05 x 0.05 mm |
| د تمرکز حالت | Fixed focus laser (no focusing required) |
| عملیاتي سافټویر | LaserGRBL، LightBurn |
| ملاتړ شوي عملیاتي سیسټمونه | وینډوز، لینکس، macOS |
| ملاتړ شوی File شکلونه | JPG, JPEG, SVG, PNG, BMP, PDF, G-Code, DXF |
| د معلوماتو د لیږد طریقه | USB, APP |
| د بریښنا انډول | ۱۰۰-۳۴۷ ولټه AC، ۵۰/۶۰ هرټز |
| د بریښنا تولید | 24V 5A |
| تصدیقونه | CE, FCC, RoHS, FDA, PSE |
| د محصول ابعاد (L x W x H) | 60 x 17 x 60 سانتي متره |
| د محصول وزن | 7.5 کیلو ګرامه |
| د ماډل شمیره | T-A6UH2 |
5. ترتیب کول
The ATOMSTACK A6 Ultra features a unibody frame design, significantly simplifying the setup process. Most components are pre-assembled, allowing for quick deployment.
۲.۱ لومړنۍ غونډه
- خلاص کړئ: په احتیاط سره د بسته بندۍ څخه ټولې برخې لرې کړئ.
- موقعیت: نقاش په یوه مستحکم، هواره سطحه کې په ښه هوا لرونکي ځای کې ځای په ځای کړئ.
- بریښنا وصل کړئ: Plug the power adapter into the engraver and then into a suitable power outlet.
- کمپیوټر سره وصل شئ (اختیاري): If using a computer for control, connect the engraver to your computer via the provided USB cable.
- سافټویر نصب کړئ: Install the recommended operating software (LaserGRBL or LightBurn) on your computer. Refer to the software's documentation for installation instructions.
شکل 5.1: A user setting up the ATOMSTACK A6 Pro laser engraver, highlighting its unibody frame design that requires no complex installation, allowing for immediate use after unboxing.
شکل 5.2: The ATOMSTACK A6 Pro laser engraver featuring its integrated camera for precise positioning, alongside a screenshot of the LightBurn software interface demonstrating its use.
6. عملیاتي لارښوونې
This section outlines the basic steps for operating your ATOMSTACK A6 Ultra laser engraver.
۶.۲ د نقاشۍ/پرې کولو لپاره چمتووالی
- پاور آن: د نقاشۍ اصلي بریښنا سویچ چالان کړئ.
- د سافټویر لانچ: Open LaserGRBL or LightBurn software on your computer.
- د موادو ځای په ځای کول: Place the material to be engraved or cut onto the working bed. Ensure it is flat and securely positioned.
- تمرکز: The A6 Ultra features a fixed-focus laser, eliminating the need for manual focusing.
- Design Import: خپل ډیزاین وارد کړئ file (JPG, JPEG, SVG, PNG, BMP, PDF, G-Code, DXF) into the software.
- د پیرامیټر ترتیبات: د موادو ډول او مطلوب اغیزې سره سم د لیزر ځواک، سرعت او پاسونه تنظیم کړئ. د غوره ترتیباتو لپاره د موادو ازموینې لارښودونو ته مراجعه وکړئ.
- موقعیت: Use the software's positioning features, potentially utilizing the built-in camera for precise alignment of your design on the material.
6.2 د عملیاتو پیل کول
- د خوندیتوب معاینه: Ensure all safety precautions are in place, including wearing safety goggles and confirming proper ventilation.
- د کار پیل: د سافټویر څخه د نقاشۍ یا پرې کولو پروسه پیل کړئ.
- څارنه: Continuously monitor the machine during operation. Be prepared to use the emergency stop if any issues arise.
- بشپړول: Once the job is complete, the laser will stop. Wait for any smoke or fumes to clear before opening the protective cover and removing the material.
۴.۴ د موادو مطابقت
The ATOMSTACK A6 Ultra is compatible with a wide range of materials for engraving and cutting:
- Wood (Basswood, Pine wood, Paulownia, Bamboo)
- اکریلیک
- چرم
- Paper, Cardboard
- ټوکر
- Some plastics (ensure they do not produce toxic fumes)
Always perform small test engravings on new materials to determine optimal settings and ensure safe processing.
شکل 6.1: یو انځور نندارې ته وړاندې کويasing the ATOMSTACK A6 Pro laser engraver's versatility in processing different materials, including basswood, acrylic, pine wood, paulownia, bamboo, and leather, suitable for both cutting and engraving.
7. ساتنه
منظم ساتنه ستاسو د لیزر نقاشۍ اوږد عمر او غوره فعالیت تضمینوي.
- د لینز پاکول: Periodically clean the laser lens with a specialized lens cleaning solution and a lint-free cloth. A dirty lens can reduce laser power and engraving quality.
- Cleaning the Engraving Bed: Remove debris and dust from the engraving bed after each use. A clean bed helps maintain consistent engraving results.
- غوړول: Check the guide rails and moving parts for smooth operation. Lubricate as needed with appropriate lubricants to prevent friction and wear.
- د فرم ویئر تازه معلومات: Check the ATOMSTACK official website for any available firmware updates for your device to ensure you have the latest features and bug fixes.
- محافظتي پوښ: Keep the B3 Dust Cover clean to maintain visibility and ensure its protective properties. The integrated 7500RPM fan helps with efficient ventilation and dust removal.
شکل 7.1: The ATOMSTACK A6 Pro laser engraver enclosed within its protective cover, illustrating benefits such as noise reduction, fire resistance, efficient ventilation, and dust protection for a safer and cleaner engraving experience.
8. ستونزه حل کول
دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو ورسره مخ کیدی شئ او احتمالي حلونه وړاندې کوي.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| لیزر ډزې نه کوي | Power not connected; Emergency stop engaged; Software error; Protective cover open. | Check power connections; Release emergency stop; Restart software/computer; Ensure protective cover is fully closed. |
| د نقاشۍ ضعیف کیفیت | Incorrect laser settings (power/speed); Dirty lens; Material not flat; Incorrect focus (though A6 Ultra is fixed focus, ensure material is at correct height). | Adjust laser power/speed in software; Clean laser lens; Ensure material is flat; Verify material height. |
| ماشین له کمپیوټر سره نه نښلي | USB cable issue; Driver not installed; Software not recognizing device. | Try a different USB port/cable; Install necessary drivers; Restart software/computer; Check device manager for recognition. |
| Unexpected movement or stopping | Loose cables; Obstruction on rails; Software command error; Limit switch triggered. | Check all cable connections; Clear any obstructions; Restart job; Inspect limit switches for damage or obstruction. |
9. تضمین او ملاتړ
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. ATOMSTACK products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, troubleshooting assistance beyond this manual, or inquiries about spare parts, please contact ATOMSTACK customer service through their official website or the contact information provided with your product. When contacting support, please have your model number (A6 Ultra / T-A6UH2) and purchase details ready.
