TechniSat DIGICLOCK 3 FM Projection Radio Alarm Clock User Manual

پیژندنه

The TechniSat DIGICLOCK 3 is an FM projection radio alarm clock designed to display time clearly on its LED screen and project it onto a wall or ceiling. This manual provides detailed instructions for its setup, operation, and maintenance to ensure optimal performance.

انځور: مخکینۍ برخه view of the TechniSat DIGICLOCK 3, showing the digital time display and the time projected from the top.

1. ترتیب کول

1.1 د بریښنا نښلول

Connect the integrated power adapter to a standard electrical outlet. For backup power during outages, insert optional batteries (not included) into the battery compartment. This ensures time and alarm settings are retained.

1.2 د انتن کنکشن

Extend the integrated FM wire antenna for optimal radio reception. Position the antenna away from other electronic devices to minimize interference.

۲.۳ د لومړني وخت تنظیم

Upon first power-up or after a complete power loss without battery backup, the time may need to be set manually. Refer to the "Setting Time and Date" section under Operating Instructions for details.

2. عملیاتي لارښوونې

2.1 د کنټرول اوورview

انځور: پورته view of the alarm clock, highlighting the various control buttons for time, alarm, radio, and projection functions.

The top panel of the DIGICLOCK 3 features several buttons for controlling its functions:

• TIME SET / PRESET: Used to set the time and save/recall radio presets.
• الارم: Activates/deactivates alarms.
• PROJECTION ON/OFF / 180° FLIP: Controls the projection feature and flips the projected image.
• Snooze / Sleep: Activates snooze during an alarm or sets the sleep timer for radio playback.
• AL VOL+ / AL VOL-: Adjusts alarm volume.
• MIN/TUNE+ / HOUR/TUNE-: Adjusts minutes/hours and tunes radio frequencies.

2.2 د وخت او نیټې ټاکل

1. فشار ورکړئ او ونیسئ د وخت وخت تڼۍ. د ساعت ښودنه به فلش شي.
2. د کارولو ساعت/ټون- او دقیقه/ټون+ د ساعت تنظیم کولو لپاره تڼۍ.
3. مطبوعاتي د وخت وخت again. The minute display will flash.
4. د کارولو ساعت/ټون- او دقیقه/ټون+ د دقیقو تنظیم کولو لپاره تڼۍ.
5. مطبوعاتي د وخت وخت د وخت تنظیم کولو حالت تایید او وتلو لپاره.

2.3 د الارم فعالیت

The DIGICLOCK 3 supports two independent alarms (Alarm 1 and Alarm 2).

د الارم ترتیب کول:

1. فشار ورکړئ او ونیسئ الارم button. "AL1" or "AL2" will flash.
2. مطبوعاتي الارم repeatedly to select Alarm 1 or Alarm 2.
3. کارول ساعت/ټون- او دقیقه/ټون+ د مطلوب الارم وخت ټاکلو لپاره.
4. مطبوعاتي الارم د وخت تصدیق کولو لپاره.
5. Select the alarm source (FM radio or buzzer) using ساعت/ټون- او دقیقه/ټون+.
6. مطبوعاتي الارم to confirm and activate the alarm. An alarm icon will appear on the display.

د سنوش دنده:

کله چې الارم غږیږي، فشار ورکړئ لنډول د لنډمهاله لپاره د خاموش کولو تڼۍ. الارم به شاوخوا 9 دقیقې وروسته بیا غږ شي.

د الارم بندول:

To stop an alarm completely, press the الارم button. The alarm will reset for the next day. To deactivate an alarm, press the الارم تڼۍ تر هغه وخته پورې چې د الارم آیکون له نندارې څخه ورک شي.

د ۶.۵ ایف ایم راډیو عملیات

Tuning Radio Stations:

فشار ورکړئ رادیو آن/بند button to turn on the FM radio. Use the ساعت/ټون- او دقیقه/ټون+ buttons to manually tune to a desired frequency. Press and hold these buttons for automatic scanning.

د پریسیټونو ذخیره کول او یادول:

دا وسیله تر ۲۰ پورې ایف ایم راډیو سټیشنونه ذخیره کولی شي.

1. مطلوب سټیشن ته ټون کړئ.
2. فشار ورکړئ او ونیسئ PRESET button until a preset number flashes.
3. کارول ساعت/ټون- او دقیقه/ټون+ to select a preset number (P01-P10).
4. مطبوعاتي PRESET بیا د سټیشن د ژغورلو لپاره.
5. د پری سیټ یادولو لپاره، په لنډ ډول فشار ورکړئ PRESET تڼۍ او بیا یې وکاروئ ساعت/ټون- او دقیقه/ټون+ د مطلوب پری سیټ غوره کولو لپاره.

د خوب وخت

پداسې حال کې چې راډیو غږیږي، فشار ورکړئ خوب button repeatedly to set a sleep timer (e.g., 90, 60, 30, 15 minutes). The radio will automatically turn off after the set time.

۳.۳ د وخت اټکل

انځور: اړخ view of the alarm clock, focusing on the projector lens which can be rotated to adjust the projection angle.

The DIGICLOCK 3 features an integrated projector to display the time on a wall or ceiling.

• Activating/Deactivating Projection: فشار ورکړئ پروجیکشن آن/آف د پروجیکشن د فعالولو یا بندولو لپاره تڼۍ.
• د پروجیکشن زاویه تنظیم کول: Rotate the projector lens on top of the unit to adjust the angle of the projected time up to 180 degrees.
• Flipping Projected Image: If the projected time appears upside down, press the 180 ° فلپ button (often combined with PROJECTION ON/OFF) to rotate the image 180 degrees.
• د تمرکز تنظیم کول: A small ring around the projector lens can be rotated to adjust the focus of the projected image for clarity.

Note: The clarity and visibility of the projected time may vary depending on ambient light conditions and projection distance. Optimal projection distance is typically within 1 to 1.5 meters.

2.6 روښانتیا ښکاره کړئ

The 1.2-inch LED display offers two brightness levels. Briefly press the لنډول button (when no alarm is active) to cycle between the brighter and dimmer display settings.

3. ساتنه

3.1 پاکول

Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface. Ensure no liquids enter the device.

3.2 د بیټرۍ بدلول

If using optional backup batteries, replace them periodically (e.g., annually) or when the display shows signs of power loss during an outage. Use the specified battery type and dispose of old batteries responsibly.

4. ستونزه حل کول

5. مشخصات

6. تضمین او ملاتړ

Spare parts availability for this product is indicated for 1 year from the date of purchase. For further support or warranty inquiries, please refer to the contact information provided with your purchase documentation or visit the official TechniSat webسایټ