KEF Q7 Meta Floorstanding Speaker User Manual

پیژندنه

The KEF Q7 Meta Floorstanding Speaker is engineered to deliver impactful bass and sonic clarity for an immersive audio experience. This manual provides detailed instructions to help you set up, operate, and maintain your speaker for optimal performance.

Key features of the Q7 Meta include:

• د میټامیټریل جذب ټیکنالوژي (MAT): Absorbs 99% of unwanted sound from the rear of the driver, ensuring pure and natural sound reproduction.
• د دولسم نسل یونی-کیو ډرایور: Acts as a single point source to disperse sound evenly, creating an immersive and cohesive soundstage with enhanced clarity.
• Refined Crossover: Ensures seamless integration of all speaker components, optimized for precise signal path and performance.
• Hybrid Bass Driver Design: Provides stiffness for piston-like movement, resulting in better bass punch and speed.
• معاصر لږترلږه ډیزاین: Features a satin finish that blends effortlessly into various interior styles.

چمتو کول

Proper placement and connection are crucial for maximizing the performance of your KEF Q7 Meta speakers.

خلاصول

سپیکر په احتیاط سره د هغې له بسته بندۍ څخه لرې کړئ. د راتلونکي لیږد یا ذخیره کولو لپاره ټول بسته بندۍ توکي وساتئ.

ځای پرځای کول

Position the floorstanding speakers on a sturdy, level surface. For optimal stereo imaging, place the speakers equidistant from your primary listening position and away from room corners to avoid excessive bass buildup. Experiment with toe-in (angling the speakers slightly inward) to fine-tune the soundstage.

Figure 1: KEF Q7 Meta Floorstanding Speakers in a typical room setup.

ارتباطات

سپیکرې خپل سره وصل کړئ amplifier or receiver using high-quality speaker wire. Ensure correct polarity (+ to + and - to -) for each speaker. The Q7 Meta features standard binding posts for secure connections.

شکل 2: شاته view of the KEF Q7 Meta speaker, highlighting the binding posts for ampژوندی اړیکه.

عملیات

Once properly set up, your KEF Q7 Meta speakers are ready to deliver exceptional audio. Ensure your ampلایفیر/رسیور فعال شوی او سم ان پټ سرچینې ته تنظیم شوی.

Grille Installation/Removal

The Q7 Meta speakers are designed to perform optimally with or without the magnetic grilles. The grilles protect the drivers from dust and physical damage. To remove, gently pull the grille away from the speaker cabinet. To install, align the grille with the speaker front and allow the magnets to secure it in place.

Figure 3: KEF Q7 Meta speaker with its magnetic grille in place.

Figure 4: KEF Q7 Meta speaker with the magnetic grille removed, revealing the drivers.

د غږ اصلاح کول

The Q7 Meta speakers feature advanced technologies for superior sound. The 12th Generation Uni-Q driver ensures a wide sweet spot, while Metamaterial Absorption Technology (MAT) significantly reduces distortion. For best results, ensure your audio source is of high quality.

Figure 5: Illustration of Metamaterial Absorption Technology (MAT) for reduced distortion.

6 شکل: چاودلی view of the 12th Generation Uni-Q driver array.

ساتنه

To ensure the longevity and optimal performance of your KEF Q7 Meta speakers, follow these simple maintenance guidelines:

• پاکول: Use a soft, dry cloth to wipe the cabinet surfaces. Avoid abrasive cleaners or solvents. For grilles, a soft brush or vacuum cleaner with a brush attachment can remove dust.
• چاپیریال: Keep speakers away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the speakers.
• سمبالول: Avoid touching the speaker cones or tweeters directly, as this can cause damage.

د ستونزو حل کول

If you encounter any issues with your KEF Q7 Meta speakers, consider the following common solutions:

• غږ نشته: Check all cable connections between the speakers and your ampژغورونکی/ترلاسه کوونکی. ډاډ ترلاسه کړئ چې amplifier is powered on and set to the correct input. Verify speaker wire polarity.
• تحریف شوی غږ: Reduce the volume level. Check for loose connections. Ensure the speakers are not overdriven by the ampلايف
• نا برابر غږ: Verify speaker placement and ensure they are equidistant from the listening position. Check balance settings on your ampلايف
• Lack of Bass: Ensure speakers are not placed too far from walls. Check for proper subwoofer integration if applicable.

If problems persist, consult the KEF support webسایټ یا د پیرودونکي خدمت سره اړیکه ونیسئ.

مشخصات

په بکس کې څه دي

Your KEF Q7 Meta Floorstanding Speaker package includes:

• KEF Q7 Meta Floorstanding Speaker (1 unit)
• د تضمین کارت

تضمین او ملاتړ

The KEF Q7 Meta Floorstanding Speaker comes with a limited warranty. Please refer to the included Warranty Card for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please visit the official KEF website or contact their customer service department. Keep your purchase receipt and serial number handy for faster service.

د محصول ویډیوګانې

دا ویډیو تر یوه حده وګورئview of KEF Floorstanding Speakers: