Xhorse 1.5mm Milling Cutter Instruction Manual

1. محصول ختم شوview

The Xhorse 1.5mm Milling Cutter is a precision-engineered accessory designed for use with Xhorse automatic key cutting machines. This cutter is essential for accurately duplicating and cutting various types of keys, ensuring high precision and durability.

It is specifically designed to work seamlessly with the Condor XC-Mini Plus, Condor XC-Mini Plus II, Condor XC-002, Dolphin XP005, Dolphin XP005L, and Dolphin XP007 key cutting machines.

Image: A set of five Xhorse 1.5mm milling cutters, each housed in its protective plastic case, ready for use.

2. مطابقت

This 1.5mm milling cutter is compatible with the following Xhorse key cutting machine models:

• Condor XC-Mini Plus
• Condor XC-Mini Plus II
• Condor XC-002
• Dolphin XP005
• Dolphin XP005L
• Dolphin XP007

Image: Various Xhorse key cutting machines, including Condor XC-Mini Plus, Condor XC-Mini Plus II, Dolphin XP005, and Dolphin XP005L, illustrating the range of compatible devices.

3. مشخصات

Image: A visual comparison of various Xhorse cutters and probes, highlighting the distinct features and sizes, including the 1.5mm milling cutter.

4. ترتیب او نصب کول

Proper installation of the milling cutter is crucial for accurate key cutting and to prevent damage to the machine or cutter.

1. Power Off Machine: Ensure your Xhorse key cutting machine is powered off and unplugged before attempting any installation or removal of components.
2. Locate Cutter Clamp: Identify the cutter clamp on your machine's cutting head. Refer to your specific machine's user manual for exact location if unsure.
3. Cl خلاص کړئamp سکرو: Use the appropriate tool (usually an Allen wrench) to loosen the screw that secures the existing cutter or holds the empty clamp. Do not remove the screw completely.
4. Remove Old Cutter (if applicable): Carefully pull out the old cutter from the clamp. Dispose of worn or damaged cutters responsibly.
5. Insert New Cutter: Insert the new 1.5mm milling cutter into the clamp. Ensure it is seated firmly and correctly aligned. The cutter should be inserted to the proper depth as indicated by your machine's guidelines or the cutter's design.
6. کل کلک کړئamp سکرو: While holding the cutter in place, tighten the clamp screw securely. Do not overtighten, as this can damage the cutter or the clamp.
7. نصب کول تایید کړئ: Gently tug on the cutter to ensure it is firmly held and does not wobble.

Image: The 1.5mm milling cutter correctly installed in an Xhorse key cutting machine, positioned alongside the machine's probe, demonstrating readiness for key cutting operations.

5. عملیاتي لارښوونې

Once the 1.5mm milling cutter is installed, follow your key cutting machine's specific operating procedures. This cutter is designed for precision cutting of various key types.

• اندازه کول: After installing a new cutter, it is recommended to perform a machine calibration or cutter height adjustment as per your machine's manual to ensure optimal cutting accuracy.
• کلیدي کلamping: په خوندي توګه clamp the key blank in the appropriate jaw of your key cutting machine. Ensure the key is stable and correctly aligned.
• د سافټویر انتخاب: Select the correct key type and cutting parameters in your machine's software interface. Verify that the software recognizes the 1.5mm cutter if automatic detection is available.
• د پرې کولو پروسه: Initiate the cutting process through the machine's interface. Monitor the cutting operation to ensure smooth and accurate key duplication.
• Post-Cutting Inspection: After cutting, carefully remove the key and inspect it for accuracy and finish. Deburr if necessary.

انځور: یو مفصل view of the Xhorse milling cutter engaged in the key cutting process, showcasing its precise interaction with the key blank within the machine.

6. ساتنه

Regular maintenance of your milling cutter will extend its lifespan and ensure consistent cutting quality.

• پاکول: After each use, use a soft brush or compressed air to remove any metal shavings or debris from the cutter and the surrounding area of the machine.
• معاینه: Periodically inspect the cutter for signs of wear, chipping, or damage. A dull or damaged cutter can lead to inaccurate cuts and potential machine strain.
• ذخیره کول: When not in use, store the milling cutter in its protective plastic case to prevent damage and keep it clean. Store in a dry, cool place.
• بدلول: Replace the cutter when it shows significant signs of wear or when cutting quality deteriorates. The lifespan of a cutter depends on the material being cut and frequency of use.

7. ستونزه حل کول

If you encounter issues while using the 1.5mm milling cutter, consider the following common problems and solutions:

• Poor Cutting Quality / Rough Edges:
  • لامل: Worn or dull cutter.
  • حل لاره: Replace the milling cutter.
  • لامل: Incorrect calibration or cutter height.
  • حل لاره: Perform machine calibration or adjust cutter height according to your machine's manual.
  • لامل: Key blank not securely clamped.
  • حل لاره: Ensure the key blank is firmly and correctly clamped in the machine's jaws.
• Cutter Breaking Frequently:
  • لامل: Overtightening the clamp screw during installation.
  • حل لاره: ډاډ ترلاسه کړئ چې clamp screw is tightened securely but not excessively.
  • لامل: Cutting material that is too hard for the cutter.
  • حل لاره: Verify the cutter is suitable for the key blank material.
  • لامل: Machine vibration or misalignment.
  • حل لاره: Check machine stability and perform a full machine calibration.
• Cutter Not Recognized by Machine:
  • لامل: ناسم لګول.
  • حل لاره: Re-install the cutter, ensuring it is fully seated.
  • لامل: د سافټویر خرابوالی.
  • حل لاره: Restart the machine and its software. Update machine firmware if available.

8. تضمین او ملاتړ

For warranty information and technical support regarding your Xhorse 1.5mm Milling Cutter or compatible key cutting machines, please refer to the official Xhorse website or contact your authorized Xhorse dealer.

Keep your purchase receipt or proof of purchase for any warranty claims.