د آډیو کنټرول A800.1 لوړوالی مونو بلاک Ampد لوړ کارونکي لارښود

1. پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of your AudioControl A800.1 Altitude Monoblock Amplifier. Please read this manual thoroughly before attempting installation or operation to ensure proper function and to prevent damage to the unit or your vehicle's audio system.

The AudioControl A800.1 is a high-performance Class D monoblock amplifier designed to deliver powerful and clear bass to your car audio system. It incorporates advanced features for optimal sound control and system integration.

انځور 1.1: مخکی view of the AudioControl A800.1 Altitude Monoblock Ampلايف

2. کلیدي ځانګړتیاوې

• Speaker-level (High) & Line-level (Low) Inputs: Provides versatile connectivity options, allowing integration with both factory and aftermarket head units.
• د لوړ بریښنا تولید: Delivers 800 Watts RMS at 1.33 Ohms, 600 Watts RMS at 2 Ohms, and 400 Watts RMS at 4 Ohms, ensuring robust power for subwoofers.
• ParaBASS Low Frequency Contouring: Offers adjustable bass enhancement to fine-tune low-frequency response according to user preference.
• Start-Stop Compliant & EV Compliant (17V): Engineered for modern vehicles, ensuring reliable operation during engine restarts and compatibility with electric vehicle power systems.
• Linkwitz-Riley Crossover: Features a 24 dB/octave Linkwitz-Riley low-pass crossover for precise frequency separation and accurate sound reproduction.
• GTO Signal Sense: Automatically activates the amplifier when an audio signal is detected, eliminating the need for a separate remote turn-on wire.
• د والټ حالت: Restricts the amplifier's output to 25% of its maximum level, preventing excessive volume when the vehicle is operated by others.
• Spike Mode: Allows connection of three 4 Ohm subwoofers at a 1.33 Ohm load for optimized power delivery and thermal stability.
• Sleek Chassis: Designed for efficient heat dissipation and a compact form factor, suitable for various installation locations.

انځور 2.1: شاته view of the A800.1 ampلایفیر چې د ننوتلو او وتلو اړیکې ښیې.

Image 2.2: Visual representation of key features such as Valet Mode and ParaBASS.

۲. په بکس کې څه دي؟

د کڅوړې د پرانیستلو پر مهال، ډاډ ترلاسه کړئ چې ټول توکي شتون لري:

• AudioControl Altitude Amplifier (A800.1)
• Hex Key(s)
• High-Level input harness
• د سکرو نصب کول
• د کارونکي لارښود (دا لارښود)

4. نصب کول

4.1 د خوندیتوب احتیاطونه

• د هر ډول بریښنایی کار پیل کولو دمخه د موټر د منفي بیټرۍ ټرمینل جلا کړئ.
• د هوا لپاره مناسب هوا ډاډمن کړئ ampلایفیر د ډیر تودوخې مخنیوي لپاره.
• Use appropriate wire gauges and fusing as specified.
• که تاسو د کوم ګام په اړه ډاډه نه یاست، نو د مسلکي نصب کونکي سره مشوره وکړئ.

۳.۲ د نصبولو Ampلايف

Choose a secure, dry location with adequate airflow. Use the provided mounting screws to firmly attach the amplifier to a solid surface in your vehicle. Avoid mounting on carpet or directly to metal without insulation.

4.3 Power and Ground Wiring

1. Connect a 4 AWG power wire from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Install a 100A fuse within 18 inches of the battery.
2. Connect a 4 AWG ground wire from the amplifier's Ground terminal to a clean, solid metal point on the vehicle chassis. Ensure a good electrical connection by scraping away any paint.
3. For remote turn-on, if not using GTO Signal Sense, connect a remote turn-on wire from your head unit to the Rmt In terminal.

4.4 ان پټ اتصال

The A800.1 supports both speaker-level and line-level inputs.

• د سپیکر په کچه معلومات: Use the provided high-level input harness to connect directly to your head unit's speaker outputs. This is ideal for factory systems without RCA pre-outs.
• Line-Level Inputs (RCA): Connect RCA cables from your head unit's subwoofer pre-outs to the CH1/CH2 RCA inputs on the ampلايف

Image 4.1: Diagram illustrating speaker-level and line-level input connections.

4.5 Output Connections (Subwoofers)

خپل سب ووفر (ګانې) د سپیکر آوټ پټ ټرمینلونو سره وصل کړئ amplifier. Observe correct polarity (+ to + and - to -).

• معیاري پیوستون: Connect a single subwoofer or multiple subwoofers in parallel/series to achieve a final impedance between 1.33 Ohms and 4 Ohms.
• Spike Mode: For connecting three 4 Ohm subwoofers, wire them to achieve a 1.33 Ohm load. Refer to the wiring diagram below for Spike Mode configuration.

Image 4.2: Wiring diagram for Spike Mode, connecting three 4 Ohm subwoofers to achieve a 1.33 Ohm load.

5. عملیاتي لارښوونې

۵.۱ لومړنی پاور اپ

After all connections are made, reconnect the vehicle's negative battery terminal. The amplifier's power indicator should illuminate. If not, check power and ground connections and the fuse.

5.2 د سمون ترلاسه کول

د ګټې کنټرول سره سمون خوري amplifier's input sensitivity to the output level of your head unit. Start with the gain set to minimum. Play a familiar music track with a strong bass signal at about 75% of your head unit's maximum volume. Slowly increase the amplifier's gain until you hear distortion, then back off slightly. This ensures maximum clean output.

۷.۲ د کراس اوور ترتیبات

The A800.1 features a variable low-pass filter (LPF) and a subsonic filter.

• د ټیټ پاس فلټر (LPF): Adjust the LPF frequency (typically 60-120 Hz) to blend the subwoofer's output seamlessly with your main speakers. Frequencies above the set point will be attenuated.
• سبسونیک فلټر: This filter removes extremely low frequencies that are inaudible and can cause damage to your subwoofer. Set it slightly below your subwoofer enclosure's tuning frequency, if known, or typically between 20-30 Hz.

5.4 ParaBASS Adjustment

The ParaBASS control allows you to boost a specific range of low frequencies. Adjust the frequency knob to select the center frequency you wish to boost, then use the level knob to apply the desired amount of boost. Use this feature sparingly to avoid distortion.

Image 5.1: Control panel of the A800.1 amplifier, highlighting gain, crossover, and ParaBASS adjustments.

5.5 Valet Mode

To activate Valet Mode, refer to the specific instructions in your full product manual or consult the AudioControl website. When active, the amplifier's output is limited to 25% of its maximum level.

Image 5.2: Detail of the Valet Mode connection on the A800.1 ampلايف

6. ساتنه

The AudioControl A800.1 amplifier requires minimal maintenance. Keep the unit clean and free of dust and debris. Periodically check all wiring connections to ensure they are secure. Do not use harsh chemicals or abrasive cleaners on the ampد لایفیر چیسس.

7. ستونزه حل کول

8. مشخصات

Image 8.1: Detailed specifications chart for the AudioControl A800.1 ampلايف

9. تضمین او ملاتړ

۸.۱ د جوړونکي تضمین

The AudioControl A800.1 Altitude Monoblock Amplifier is covered by a 1-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2 تخنیکي ملاتړ

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact AudioControl customer support directly. Visit the official AudioControl webد اړیکو معلوماتو او اضافي سرچینو لپاره سایټ.

تاسو کولی شئ نور معلومات او ملاتړ په لاندې لینک کې ومومئ AudioControl Store on Amazon.